Data-backup S7-PLC PN-port on USB-Stick
S7 PLC data Hardware-independent safe/restore directly to/from the USB-STICK universally with PLC-Trigger!
3G-quad band-modem with 4 digital in, 2
digital out and 2 analogue in
Use in Germany, Austria, rest of Europe as 2G
Switzerland only as 3G
Magnetic base antenna art.nr: 9379-ANT
optionally
Product Overview:
SPS data backup without installation of additional software on each USB-STICK, SD-CARD and every FTP server.Machine data is simply and reliably deducted from Siemens S7 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.
Highlights:
- Thanks to the USB stick as a storage medium, you can back up machine data in the shortest possible time and transport it to other machines as required.
- When delivering the same machine again, customers can bring their data directly for acceptance, no PLC knowledge required! Insert the USB stick and set the PLC trigger!
more...
469,00 € plus VAT. and shipping
ARTNR: 153593G
MESSI NG 3G-version
Obsolete
EAN number: | 4260363247962 | |
HS-code: | 85176200 | |
Weight: | 0.2 kg |
Product Overview:
SPS data backup without installation of additional software on each USB-STICK, SD-CARD and every FTP server.Machine data is simply and reliably deducted from Siemens S7 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.
Highlights:
- Thanks to the USB stick as a storage medium, you can back up machine data in the shortest possible time and transport it to other machines as required.
- When delivering the same machine again, customers can bring their data directly for acceptance, no PLC knowledge required! Insert the USB stick and set the PLC trigger!
- Triggering directly out of the S7 controler , thus no time lag and delays due to external circuits or regulator.
- No change at your Simatic S7 controller.
- Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
- Bidirectional Backup & Playback!
! DOUBLE FUNCTIONS for PLC experts!
- ALARM_MESSAGE DISPATCH INTEGRATED
- Freely selectable fault annunciator integrated, not only in case of faulty recording, no, a directly operation monitor for your production plant .
- Resets any error messages send by mail to any number of recipients.
- As a result, no plant supervisor escapes a malfunction!
- Avoid high costs caused by machine downtime!
- All functions of the EtherSens-Basic fully usable!
Application areas:
- Save data on your FTP data base , like production data and all relevant system parameters.- Use a simple USB-STICK, SD-CARD or a FTP server as data backup server , no extra software necessary.
- Backups before System conversions / changes !
- Save freely selectable DB contents and restore them!
- Link S7-Siemens PLC to any TCP/IP devices and get access to the process data directly.
- Schedule-relevant data, e.g. after finished palletizing PLC trigger controlled storing.
Configuration:
The configuration takes place directly into the integrated web server .Thanks to the designed flash memory, data can not be lost, which means a device can be easily tested at the office and then sent to the construction site__.
Even in the event of power failure or other supply disruptions there is no danger to the data.
After configuration no additional PC is required **. The installation is self-explanatory and can be carried out on-site by untrained personnel.
Direct Voice-speach-output with MESSI NG 3G
Transmission of fault messages as a voice message to several participants
MESSI NG 3G can send stored-voice-messages to specific recipients depending on the defined input and signal status. To do this, the specified phone-numbers are called according to the phone-number-plan and then the digitized voice-message is transmitted.
Depending on whether the message has been acknowledged or not, the next participant in the numbering-plan will be informed.
Let yourself for example, giving water-levels over the phone, MESSI NG 3G will do this for you.
MESSI NG 3G can send stored-voice-messages to specific recipients depending on the defined input and signal status. To do this, the specified phone-numbers are called according to the phone-number-plan and then the digitized voice-message is transmitted.
Depending on whether the message has been acknowledged or not, the next participant in the numbering-plan will be informed.
Let yourself for example, giving water-levels over the phone, MESSI NG 3G will do this for you.
Direct Fax
By direct dialling up the fax machine a message is carried out to a fax-receiver. If a connection comes off the message will be transmitted.
Remote Maintenance via keyboard and voice
The MESSI remote-station will be called directly by integrated mobile-phone. If a connection comes off, digital In- and Outputs for teleswitching will be transmitted. Each device
can both transmit state of things and accordingly receive switch signals.
Remote switching with MESSI to MESSI
The MESSI will be called by conventional Telephone or by mobile-phone. With a direct voice message and DTMF-tone dialling the corresponding output will be set-up. If a switching
operation has come off a speech output will confirm it.
Message via SMS (SMSC)
A SMS to a mobile phone is basically send by SMSC. Within the GSM-network it takes place via on-net SMSC. Thereby it’s unimportant in which mobile network the receiver is.
The message is activated by:
- digital contacts (relays, motion detector...)
- serial interface (PLC, PC, Microcontroller ...) bitserial (PLC)
The detection system transmits the SMS to the mobile network operator. The mobile network operator provides the SMS to the mobile phone. Optionally the detection system dials the mobile phone to „wake up“ the receiver or to initiate the confirmation handling.
The message is activated by:
- digital contacts (relays, motion detector...)
- serial interface (PLC, PC, Microcontroller ...) bitserial (PLC)
The detection system transmits the SMS to the mobile network operator. The mobile network operator provides the SMS to the mobile phone. Optionally the detection system dials the mobile phone to „wake up“ the receiver or to initiate the confirmation handling.
Data logging
Cyclic data logging or data logging on occasion is realisable. The log data will be transmitted e.g. once a day via e-mail.
Special data logger functions can be implemented on request and are not part of the basis functions.
Special data logger functions can be implemented on request and are not part of the basis functions.
To switch a MESSI-output via SMS
Switching an output via SMS is an integrated function of the MESSI. Herewith the switching operation will be secure and comprehensible from afar.
Supply voltage: | 24V DC +/- 20% |
Power consumption: | 3 watt |
Display: | integrated Display or Web-Browser |
Handling/Configuration: | 3 buttons |
Interfaces: |
to the PLC:
digital in-/outputsanalogue in-/outputs
to the PD/PC:
Ethernet
|
Integrated modem: |
GSM/GPRS/EDGE: 900/1800 MHz UMTS/HSPA: 900/2100 MHz GPRS/EDGE/UMTS |
Operating temperature: | -20 - +60°C |
Case: | plastic case for DIN-rail mounting |
Dimensions: | 110 x 60 x 107 mm |
Scope of delivery: |
MESSI Attention: GSM-antenna not included in scope of delivery |
All prices plus costs of delivery, shipping insurance and VAT.
successor:
15359
MESSI NG Obsolete
Successor: MESSI NG 3G-version (Art.No: 153593G)
GSM-quad band-modem with 4 digital in, 2 digital out and 2 analogue in
MESSI NG Obsolete
Successor: MESSI NG 3G-version (Art.No: 153593G)
GSM-quad band-modem with 4 digital in, 2 digital out and 2 analogue in
0,00 €
plus VAT. and shipping
plus VAT. and shipping
accessories:
59,00 €
plus VAT. and shipping
plus VAT. and shipping
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
29,00 €
plus VAT. and shipping
plus VAT. and shipping
40,00 €
plus VAT. and shipping
plus VAT. and shipping
4,00 €
plus VAT. and shipping
plus VAT. and shipping
15359-DKAB
Debug-cable for MESSI NG
For connection to the serial COM port of a PC Length: 3m
Debug-cable for MESSI NG
For connection to the serial COM port of a PC Length: 3m
74,00 €
plus VAT. and shipping
plus VAT. and shipping
11300
24V charge controller with battery pack
24V charge controller with battery pack for uninterruptible power supply and emergency power supply.
24V charge controller with battery pack
24V charge controller with battery pack for uninterruptible power supply and emergency power supply.
397,00 €
plus VAT. and shipping
plus VAT. and shipping
All prices plus costs of delivery, shipping insurance and VAT.
Error messaging
MESSI NG 2G
Long distance report- and information systems in 2G-net
Long distance report- and information systems in 2G-net
EtherSens Basic
PLC fault message dispatch +++ PLC data logging/saving +++ implement control tasks +++ Universal solution per task +++ Web page parameterization +++ EtherSens Basic
PLC fault message dispatch +++ PLC data logging/saving +++ implement control tasks +++ Universal solution per task +++ Web page parameterization +++ EtherSens Basic
All prices plus costs of delivery, shipping insurance and VAT.
29,00 €
plus VAT. and shipping
plus VAT. and shipping
40,00 €
plus VAT. and shipping
plus VAT. and shipping
4,00 €
plus VAT. and shipping
plus VAT. and shipping