Data-backup S7-PLC PN-port on SD-card

Product Overview:

SPS data backup without installation of additional software on each SD-CARD and every FTP server.
Machine data is simply and reliably deducted from Siemens S7 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.

Highlights:

• Triggering directly out of the S7 controler , thus no time lag and delays due to external circuits or regulator.
• No change at your Simatic S7 controller.
• Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
• Bidirectional Backup & Playback!

! DOUBLE FUNCTIONS for PLC experts!

• ALARM_MESSAGE DISPATCH INTEGRATED

• Freely selectable fault annunciator integrated, not only in case of faulty recording, no, a directly operation monitor for your production plant .

• Resets any error messages send by mail to any number of recipients.

• As a result, no plant supervisor escapes a malfunction!

• Avoid high costs caused by machine downtime!

• All functions of the EtherSens-Basic fully usable!

Application areas:

- Save data on your SD-Card or FTP data base, like production data and all relevant system parameters.
- Use a simple SD-Card or a FTP server as data backup server , no extra software necessary.
- Backups before System conversions / changes !
- Save freely selectable DB contents and restore them!
- Link S7-Siemens PLC to any TCP/IP devices and get access to the process data directly.
- Schedule-relevant data, e.g. after finished palletizing PLC trigger controlled storing.

Configuration:

The configuration takes place directly into the integrated web server .
Thanks to the designed flash memory, data can not be lost, which means a device can be easily tested at the office and then sent to the construction site__.
Even in the event of power failure or other supply disruptions there is no danger to the data.
After configuration no additional PC is required **. The installation is self-explanatory and can be carried out on-site by untrained personnel.

Supply voltage:	100 - 240V AC, 50 - 60 Hz 24V DC +/- 20% USB (from PC/power-pack)
Power consumption:	6 watt
Measurement:	Supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards Compatible with 3-phase, 3- or 4-wire (delta or wye), and other 3-phase services Supplies total (fundamental and harmonic) active, reactive and apparent energy, and fundamental active/reactive energy on each phase and on the overall system Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C Supports current transformer and di/dt current sensors Dedicated ADC channel for neutral current input Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C Supplies sampled waveform data on all three phases and on neutral current
Display:	WEB-Browser 1 status LED bicolor
Handling/Configuration:	WEB-Browser
Interfaces:	4 x voltage-input (L1, L2, L3, N) 4 x sensor-input (B+W-terminal ever phase + N) Slot for microSD Antenna-connector SMA(f) (2.4 GHz IEEE 802.11b/g) 10/100BaseTX RJ45-ethernet-plug Button for factory settings
Overvoltage category:	CAT IV
Insulation value network <=> mains voltage:	1,5 KV
Operating temperature:	0 - 55°C
Case:	ABS-plastic case V0
Dimensions:	115 x 95 x 30 mm
Scope of delivery:	MONI WIFI-stub-antenna

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

EtherSens

EtherSens Energy
Collect energy data +++ Log energy data +++ PLC fault message dispatch +++ PLC data logging/saving +++ Implement control tasks +++ Configuration via webinterface

EtherSens Control
Capture Dig/Analog-IO +++ Log Dig/Analog-IO +++ PLC fault message-dispatch +++ PLC-data logging/saving +++ implement control-tasks +++ Datalogger with web-server +++ Digital/analogue onboard-IO

EtherSens Basic
PLC fault message dispatch +++ PLC data logging/saving +++ implement control tasks +++ Universal solution per task +++ Web page parameterization +++ EtherSens Basic

EtherSens Oxygen
Capture of gas-values +++ Monitor of gas-values +++ PLC-fault messaging +++ PLC-data logging/saving +++ Convert control tasks

All prices plus costs of delivery, shipping insurance and VAT.