Data-backup S7-PLC PN-port on SD-card

Product Overview:

SPS data backup without installation of additional software on each SD-CARD and every FTP server.
Machine data is simply and reliably deducted from Siemens S7 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.

Highlights:

• Triggering directly out of the S7 controler , thus no time lag and delays due to external circuits or regulator.
• No change at your Simatic S7 controller.
• Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
• Bidirectional Backup & Playback!

! DOUBLE FUNCTIONS for PLC experts!

• ALARM_MESSAGE DISPATCH INTEGRATED

• Freely selectable fault annunciator integrated, not only in case of faulty recording, no, a directly operation monitor for your production plant .

• Resets any error messages send by mail to any number of recipients.

• As a result, no plant supervisor escapes a malfunction!

• Avoid high costs caused by machine downtime!

• All functions of the EtherSens-Basic fully usable!

Application areas:

- Save data on your SD-Card or FTP data base, like production data and all relevant system parameters.
- Use a simple SD-Card or a FTP server as data backup server , no extra software necessary.
- Backups before System conversions / changes !
- Save freely selectable DB contents and restore them!
- Link S7-Siemens PLC to any TCP/IP devices and get access to the process data directly.
- Schedule-relevant data, e.g. after finished palletizing PLC trigger controlled storing.

Configuration:

The configuration takes place directly into the integrated web server .
Thanks to the designed flash memory, data can not be lost, which means a device can be easily tested at the office and then sent to the construction site__.
Even in the event of power failure or other supply disruptions there is no danger to the data.
After configuration no additional PC is required **. The installation is self-explanatory and can be carried out on-site by untrained personnel.

Supply voltage:	24V DC +/- 20%
Power consumption:	4 watt
Interfaces:	4 x Analogue Input V1.1 (switchable between U, I, differential)  - Free configurable voltage-inputs with full 15-bit resolution:    0-50V, 0-40V, 0-20V, 0-10V, 0-5V, 0-4V, 0-2V,    0-1V, 0-0,5V, 0-0,25V  - Free configurable differential voltage-inputs with full 15-bit    resolution AI1 <-> AI2 and AI3 <-> AI4:    +/-50V, +/-40V, +/-10V, +/-5V, +/-4V, +/-2V, +/-1V, +/-0,5V, +/-0,25V  - Free configurable current-inputs with full 15-bit resolution:    0-20mA, 4-20mA  - sample-rate of AD-converter can be selected:   - fast = fast conversion / short precision   - balanced = middle conversion / middle precision   - exact = slow conversion / high precision  - Measuring ranges after changing are calibrated to:   - offset for 0V / 0mA   - slope of voltage / current     (ideal for end of measuring-range / full-scale)  - Relative values can be configured to the original voltage- /    current-values. For e.g.:   On the voltage-input 10V were measured 5V,   relative minimum = 0 kg, relative maximum = 100 kg,   so the displayed-value is 50 kg   Is minimum and maximum configured as 0 the measured   voltage- / current-value will be displayed. 4 x analogue Output 0/4-20mA (source-power 24V)
Handling/Configuration:	WEB-Browser
Operating temperature:	0 - 55°C
Case:	PlugIn-board
Dimensions:	74,9 x 86 x 20 mm
Scope of delivery:	PlugIn-board Installation into the EtherSens-device

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.