Data-backup S7-PLC PN-port on SD-card
S7 PLC data Hardware-independent safe/restore directly to/from the SD-Card, universally with PLC-Trigger!
Extension-board for EtherSens-devices
4 x analog IN 0-5V
opt. with ext.Shunt 0/4-20mA
opt. with ext. restistance 0-10/24/50V
4 x analog OUT 0/4-20mA (24V)
Power consumption: 4W
Product Overview:
SPS data backup without installation of additional software on each SD-CARD and every FTP server.Machine data is simply and reliably deducted from Siemens S7 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.
Highlights:
- Triggering directly out of the S7 controler , thus no time lag and delays due to external circuits or regulator.
- No change at your Simatic S7 controller.
- Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
- Bidirectional Backup & Playback!
more...
128,00 € plus VAT. and shipping
ARTNR: 9230-AIO
Extension Analog-IO V1.0
EAN number: | 4260363246521 | |
HS-code: | 85423190 |
Product Overview:
SPS data backup without installation of additional software on each SD-CARD and every FTP server.Machine data is simply and reliably deducted from Siemens S7 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.
Highlights:
- Triggering directly out of the S7 controler , thus no time lag and delays due to external circuits or regulator.
- No change at your Simatic S7 controller.
- Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
- Bidirectional Backup & Playback!
! DOUBLE FUNCTIONS for PLC experts!
- ALARM_MESSAGE DISPATCH INTEGRATED
- Freely selectable fault annunciator integrated, not only in case of faulty recording, no, a directly operation monitor for your production plant .
- Resets any error messages send by mail to any number of recipients.
- As a result, no plant supervisor escapes a malfunction!
- Avoid high costs caused by machine downtime!
- All functions of the EtherSens-Basic fully usable!
Application areas:
- Save data on your SD-Card or FTP data base, like production data and all relevant system parameters.- Use a simple SD-Card or a FTP server as data backup server , no extra software necessary.
- Backups before System conversions / changes !
- Save freely selectable DB contents and restore them!
- Link S7-Siemens PLC to any TCP/IP devices and get access to the process data directly.
- Schedule-relevant data, e.g. after finished palletizing PLC trigger controlled storing.
Configuration:
The configuration takes place directly into the integrated web server .Thanks to the designed flash memory, data can not be lost, which means a device can be easily tested at the office and then sent to the construction site__.
Even in the event of power failure or other supply disruptions there is no danger to the data.
After configuration no additional PC is required **. The installation is self-explanatory and can be carried out on-site by untrained personnel.
Supply voltage: | 24V DC +/- 20% |
Power consumption: | 4 watt |
Interfaces: |
4 x Analogue Input V1.0 (0-5V) - opt. with ext.Shunt 0/4-20mA - opt. with ext. restistance 0-10/24/50V 4 x analogue Output 0/4-20mA (source-power 24V) |
Handling/Configuration: | WEB-Browser |
Operating temperature: | 0 - 55°C |
Case: | PlugIn-board |
Dimensions: | 74,9 x 86 x 20 mm |
Scope of delivery: |
PlugIn-board Installation into the EtherSens-device |
All prices plus costs of delivery, shipping insurance and VAT.
All prices plus costs of delivery, shipping insurance and VAT.
All prices plus costs of delivery, shipping insurance and VAT.
9203
EtherSens Energy for Rogowski-coils
Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh Parallel LAN and WIFI-interface For Rogwski-coils up to 0,5V
EtherSens Energy for Rogowski-coils
Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh Parallel LAN and WIFI-interface For Rogwski-coils up to 0,5V
731,00 €
plus VAT. and shipping
plus VAT. and shipping
9220-21
Rogowski-coil 5000A, 35mm
Cable hole: 35mm Cable length: 1,5m Shutter: click cap Easy and fast installation with no interruptible power-lines
Rogowski-coil 5000A, 35mm
Cable hole: 35mm Cable length: 1,5m Shutter: click cap Easy and fast installation with no interruptible power-lines
106,00 €
plus VAT. and shipping
plus VAT. and shipping
9202
EtherSens Energy for folding-cores
Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh Parallel LAN and WIFI-interface For folding-cores with 1A secundary-current
EtherSens Energy for folding-cores
Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh Parallel LAN and WIFI-interface For folding-cores with 1A secundary-current
731,00 €
plus VAT. and shipping
plus VAT. and shipping
9220-11
Folding-core current-sensor 60/1A
Cable hole: 17x17mm Opening / closing with a handle Output Terminals Output overvoltage protection
Folding-core current-sensor 60/1A
Cable hole: 17x17mm Opening / closing with a handle Output Terminals Output overvoltage protection
50,00 €
plus VAT. and shipping
plus VAT. and shipping
9201
EtherSens Basic
Operating as a client or access-point Configuration via web-server Supply: 24V DC
EtherSens Basic
Operating as a client or access-point Configuration via web-server Supply: 24V DC
264,00 €
plus VAT. and shipping
plus VAT. and shipping