Data-backup S5-PLC on USB-Stick

Product Overview:

SPS data backup without installation of additional software on each USB-STICK, SD-CARD and every FTP server.
Machine data is simply and reliably deducted from Siemens S5 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.

Highlights:

• Thanks to the USB stick as a storage medium, you can back up machine data in the shortest possible time and transport it to other machines as required.
• When delivering the same machine again, customers can bring their data directly for acceptance, no PLC knowledge required! Insert the USB stick and trigger via IO PLC trigger!

• Triggering directly out of the S5 control , thus no time lag and delays due to external circuits or regulator.
• No change at your Simatic S5 controller.
• Even with occupied S5-PG interface thanks to PG-MUX-II no obstacle!
• Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
• Bidirectional Backup & Playback!

! DOUBLE FUNCTIONS for PLC experts!

• S5 PROGRAMMING & EXTERNAL ACCESS:

• programming and visualization possible, parallel to your Siemens S5!

• You can use the, in the product included, S5-LAN and all the functionality of the module!

• Direct access from all S7-TCP-IP devices down to the I/O level of the S5 machine!

ALARM_MESSAGE DISPATCH INTEGRATED

• Freely selectable fault annunciator integrated, not only in case of faulty recording, no, a directly operation monitor for your production plant .

• Resets any error messages send by mail to any number of recipients.

• As a result, no plant supervisor escapes a malfunction!

• Avoid high costs caused by machine downtime!

• All functions of the EtherSens-Basic fully usable!

Application areas:

- Save data on your FTP data base , like production data and all relevant system parameters.
- Use a simple USB-STICK, SD-CARD or a FTP server as data backup server , no extra software necessary.
- Backups before System conversions / changes !
- Save freely selectable DB contents and restore them!
- Link S5-Siemens PLC to S7-TCP devices and get access to the process data directly.
- Schedule-relevant data, e.g. after finished palletizing PLC trigger controlled storing.

Configuration:

The configuration takes place directly into the integrated web server .
Thanks to the designed flash memory, data can not be lost, which means a device can be easily tested at the office and then sent to the construction site__.
Even in the event of power failure or other supply disruptions there is no danger to the data.
After configuration no additional PC is required . The installation is self-explanatory and can be carried out on-site by untrained personnel.

Supply voltage:	24V DC +/- 20%
Power consumption:	3 watt
Display:	WEB-Browser 1 status LED bicolor
Handling/Configuration:	WEB-Browser
Interfaces:	Slot for microSD Slot for USB-stick Antenna-connector SMA(f) (2.4 GHz IEEE 802.11b/g) 10/100BaseTX RJ45-ethernet-plug Button for factory settings
Overvoltage category:	CAT IV
Insulation value network <=> mains voltage:	1,5 KV
Operating temperature:	0 - 55°C
Case:	ABS-plastic case V0
Dimensions:	100 x 112 x 45 mm
Scope of delivery:	EtherSens Basic with USB-port S5-LAN++ WIFI-stub-antenna

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.