Data-backup S5-PLC on SD-card + dig.IO
![](images/Homepage-Bilder/ethersens-control.png)
![](images/Homepage-Bilder/ethersens-control.png)
![](images/katalog/DB-S5-FTP.png)
![](images/katalog/DB-S5-FTP-IO.png)
![](images/katalog/DB-S5-SD.png)
![](images/katalog/DB-S5-SD-IO.png)
![](images/katalog/DB-S5-USB.png)
![](images/katalog/DB-S5-USB-IO.png)
![](images/katalog/DB-PN-FTP.png)
![](images/katalog/DB-PN-FTP-IO.png)
![](images/katalog/DB-PN-SD.png)
![](images/katalog/DB-PN-SD-IO.png)
![](images/katalog/DB-PN-USB.png)
![](images/katalog/DB-PN-USB-IO.png)
![](images/katalog/DB-S7-MPI-FTP.png)
![](images/katalog/DB-S7-MPI-FTP-IO.png)
![](images/katalog/DB-S7-MPI-SD.png)
![](images/katalog/DB-S7-MPI-SD-IO.png)
![](images/katalog/DB-S7-MPI-USB.png)
![](images/katalog/DB-S7-MPI-USB-IO.png)
![](images/katalog/ets-doku.png)
![](images/katalog/ets-steuerung.png)
S5 PLC data Hardware-independent secure/restore directly to/from a SD-CARD use PLC & additional IO trigger!
Supply voltage: 24V DC
12 x digital IN or OUT 24VDC 400mA
free config with software
4 x analog IN 0-5V
opt. with ext.Shunt 0/4-20mA
opt. with ext. restistance 0-10/24/50V
4 x analog OUT 0/4-20mA (24V)
Only LAN-interface
Product Overview:
SPS data backup without installation of additional software on each SD-CARD every FTP server.Machine data is simply and reliably deducted from Siemens S5 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.
Highlights:
- If required can be triggered via the IO level directly without PLC changes backup / restore!
- Triggering also out of the S5 control , thus no time lag and delays due to external circuits or regulator.
- No change at your Simatic S5 controller.
- Even with occupied S5-PG interface thanks to PG-MUX-II no obstacle!
more...
ARTNR: 9200-AD-24V-OW
EtherSens Control 24V Analog-/Digital-IO V1.0 o. LAN
EAN number: | 4260363247283 | |
HS-code: | 85423190 | |
Weight: | 0.2 kg |
Product Overview:
SPS data backup without installation of additional software on each SD-CARD every FTP server.Machine data is simply and reliably deducted from Siemens S5 PLC controllers and stored on any FTP server.
No matter if daily data backup , storage processes, machine change or after every production cycle .
Writes all production relevant data to your server for archiving and further processing.
Thanks to the integrated reverse play function , saved data can be transferred back to the PLC machine at any time. Ideal also in test trials and control conversions.
Highlights:
- If required can be triggered via the IO level directly without PLC changes backup / restore!
- Triggering also out of the S5 control , thus no time lag and delays due to external circuits or regulator.
- No change at your Simatic S5 controller.
- Even with occupied S5-PG interface thanks to PG-MUX-II no obstacle!
- Data can also be processed directly from the device by external controllers such as S7-1200 / S7-1500 or with CPs.
- Bidirectional Backup & Playback!
! DOUBLE FUNCTIONS for PLC experts!
- S5 PROGRAMMING & EXTERNAL ACCESS:
- programming and visualization possible, parallel to your Siemens S5!
- You can use the, in the product included, S5-LAN and all the functionality of the module!
- Direct access from all S7-TCP-IP devices down to the I/O level of the S5 machine!
ALARM_MESSAGE DISPATCH INTEGRATED
- Freely selectable fault annunciator integrated, not only in case of faulty recording, no, a directly operation monitor for your production plant .
- Resets any error messages send by mail to any number of recipients.
- As a result, no plant supervisor escapes a malfunction!
- Avoid high costs caused by machine downtime!
- All functions of the EtherSens Control 24V Digital-/Relais-IO fully usable!
Application areas:
- Save data on your FTP data base , like production data and all relevant system parameters.- Use a simple SD-CARD or a FTP server as data backup server , no extra software necessary.
- Backups before System conversions / changes !
- Save freely selectable DB contents and restore them!
- Link S5-Siemens PLC to S7-TCP devices and get access to the process data directly.
- Schedule-relevant data, e.g. after finished palletizing IO- andPLC trigger controlled storing.
Configuration:
The configuration takes place directly into the integrated web server .Thanks to the designed flash memory, data can not be lost, which means a device can be easily tested at the office and then sent to the construction site__.
Even in the event of power failure or other supply disruptions there is no danger to the data.
After configuration no additional PC is required . The installation is self-explanatory and can be carried out on-site by untrained personnel.
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S5-FTP.png)
S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on FTP-server
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S5-FTP-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to FTP-server
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S5-SD.png)
S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on SD-card
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S5-SD-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to SD-card
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S5-USB.png)
S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on USB-stick
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S5-USB-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to USB-stick
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-PN-FTP.png)
S7-PLC triggered DB-backup/-restore without additional PC via PN-port on FTP-server
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-PN-FTP-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via PN-port to FTP-server
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-PN-SD.png)
S7-PLC triggered DB-backup/-restore without additional PC via PN-port on SD card
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-PN-SD-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via PN-port to SD-card
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-PN-USB.png)
S7-PLC triggered DB-backup/-restore without additional PC via PN-port to USB-stick
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-PN-USB-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via PN-port to USB-stick
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S7-MPI-FTP.png)
S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on FTP-server
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S7-MPI-FTP-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to FTP-server
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S7-MPI-SD.png)
S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on SD-card
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S7-MPI-SD-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to SD-card
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S7-MPI-USB.png)
S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on USB-stick
![Produkbild](images/showimage.php?size=227.5&path=../images/katalog/DB-S7-MPI-USB-IO.png)
Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to USB-stick
![Produkbild](images/showimage.php?prozent=65&path=../images/katalog/ets-doku.png)
By connecting a line-recorder to the EtherSens-device anyone without network-knowledge can visually capture and further process the log.
![Produkbild](images/showimage.php?prozent=65&path=../images/katalog/ets-steuerung.png)
Apply small control tasks of your systems with EtherSens-Control-devices. Determine switching points where the device is running to respond. Depending on the parameterization, an email or SMS notification (depending on the device-configuration) or the device automatically controls via the optional IO-modules (analog / digital / relay).
Supply voltage: | 24V DC +/- 20% |
Power consumption: | 9 watt (without possibly switched outputs) |
Display: |
WEB-Browser 1 status LED bicolor |
Handling/Configuration: | WEB-Browser |
Interfaces: |
12 x digital-IO switchable as - Input (24VDC max. 8k2 (PullUp external) / min. 1.6mA ) or - Output (24VDC 400mA) 4 x Analogue Input V1.0 (0-5V) - opt. with ext.Shunt 0/4-20mA - opt. with ext. restistance 0-10/24/50V 4 x analogue Output 0/4-20mA (source-power 24V) Slot for microSD 10/100BaseTX RJ45-ethernet-plug Button for factory settings |
Overvoltage category: | CAT IV |
Insulation value network <=> mains voltage: |
1,5 KV |
Operating temperature: | 0 - 55°C |
Case: | ABS-plastic case V0 |
Dimensions: | 100 x 112 x 45 mm |
Scope of delivery: | EtherSens Control |
accessories:
plus VAT. and shipping
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1
![](images/Homepage-Bilder/Patchkabel_Cat5_Cat5plus.png)
plus VAT. and shipping
Option Safe S7-PLC-data-transmission
Function extension for recognition of save data-transmission by toggle bit or counters in the S7-PLC. In case of a failure, a default configuration is mapped to the outputs.
plus VAT. and shipping
plus VAT. and shipping
extensions:
Extension Analog-IO V1.0
Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension with ext. galv. separated I2C 5V
Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V Power consumption: 2W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension LTE-modem
LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet Power consumption: 6,5W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension Energy-IO
Extension-board for EtherSens-devices Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh For Rogwski-coils up to 0,5V
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
U-I-box for EtherSens
max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m
![](images/Homepage-Bilder/U-I-Box.png)
plus VAT. and shipping
Sun-light-sensor for EtherSens
max. 220k Lux (switchable ranges) 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
![](images/Homepage-Bilder/SonnenSensor.png)
plus VAT. and shipping
Gyro-Sensor 312 for EtherSens
Measuring range: ±1.5g / ±3g / ±6g / ±12g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
![](images/Homepage-Bilder/GyroSensor.png)
plus VAT. and shipping
Gyro-Sensor 313 for EtherSens
Measuring range: ±0.5g / ±1g / ±2g / ±4g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
![](images/Homepage-Bilder/GyroSensor.png)
plus VAT. and shipping
Temp./humidity/air-pressure for EtherSens
Measuring range: Temperature: -40 ...+85°C Humidity: 0...100% relative Feuchte Pressure: 300...1100 hPa 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
![](images/Homepage-Bilder/9220-T-LF-D.png)
plus VAT. and shipping
Segment-display for EtherSens
4 Digit 14 segment-display WHITE 0,56" high in wall-mounting case 5V DC supply (from I2C-interfaceport) I2C-connection
![](images/Homepage-Bilder/Segmentanzeige.png)
plus VAT. and shipping
Extension with ext. galv. separated I2C 3.3V
Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V Power consumption: 2W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension RS485-IO
Extensionboard for EtherSens-devices V1.0 for RS485 Power consumption: 2W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension TTY-IO
Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) Power consumption: 2W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension Digital-IO
Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software Power consumption: 4W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension 24V Relay-IO
Extension-board for EtherSens-devices Supply voltage: 24V DC 4 x relay-OUT 230VAC/16A Power consumption: 4W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension 230V Relay-IO
Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A Power consumption: 2,5W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Power-supply-rack-unit 230V
Input voltage: 100 - 240VAC 50-60Hz Output voltage: 24V DC Power: 4W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension Analog-IO V1.1
Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension RS422-IO
Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) Power consumption: 2W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension RS232-IO
Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) Power consumption: 2W
![](images/Homepage-Bilder/ETS-Erweiterung.png)
plus VAT. and shipping
Extension USB-port
USB-port for EtherSens-devices (data storage) Extension for: - DB-backup/restoure-function - CSV-recording Maximum current: 200mA for 5V DC
![](images/Homepage-Bilder/ets-usb.png)
plus VAT. and shipping
EtherSens Control 24V Analog-/Digital-IO V1.0 o. LAN
Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Only LAN-interface
![](images/Homepage-Bilder/ethersens-control.png)
plus VAT. and shipping
EtherSens Control 24V Analog-IO V1.0
Supply voltage: 24V DC 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-A.png)
plus VAT. and shipping
EtherSens Control 24V Analog-IO V1.1
Supply voltage: 24V DC 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-A.png)
plus VAT. and shipping
EtherSens Control 24V 2x Analog-IO V1.0
Supply voltage: 24V DC 8 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 8 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-AA.png)
plus VAT. and shipping
EtherSens Control 24V 2x Analog-IO V1.1
Supply voltage: 24V DC 8 x Analogue Input (switchable between U, I, differential) 8 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-AA.png)
plus VAT. and shipping
EtherSens Control 24V Analog-/Digital-IO V1.0
Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control.png)
plus VAT. and shipping
EtherSens Control 24V Analog-/Digital-IO V1.1
Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control.png)
plus VAT. and shipping
EtherSens Control 24V Analog-/Relay-IO
Supply voltage: 24V DC 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-AR.png)
plus VAT. and shipping
EtherSens Control 24V Analog-/Relay-IO V1.1
Supply voltage: 24V DC 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-AR.png)
plus VAT. and shipping
EtherSens Control 24V Digital-IO
Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-D.png)
plus VAT. and shipping
EtherSens Control 24V 2x Digital-IO
Supply voltage: 24V DC 24 x digital IN or OUT 24VDC 400mA free config with software LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-DD.png)
plus VAT. and shipping
EtherSens Control 24V Digital-/Relay-IO
Supply voltage: 24V DC 12 x digital IN or OUT 24VDC 400mA free config with software 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-DR.png)
plus VAT. and shipping
EtherSens Control 230V Relay-IO
Supply voltage: 230V AC 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-R.png)
plus VAT. and shipping
EtherSens Control 24V Relay-IO
Supply voltage: 24V DC 4 x Relay-OUT 230VAC/16A LAN and WIFI-interface integrated function to the same time
![](images/Homepage-Bilder/ethersens-control-R.png)
plus VAT. and shipping