Extension Analog-IO V1.1 - Process Informatik Entwicklungsgesellschaft mbH

Extension Analog-IO V1.1

Extension-board for EtherSens-devices
4 x Analogue Input (switchable between U, I,
differential)
4 x analog OUT 0/4-20mA (24V)
Power consumption: 4W

Extend your EtherSens-device with analogue input/output:
Depending on the target device, 9230-GG may have to be used additionally!

149,00 € plus VAT. and shipping

ARTNR: 9230-AIO-V1.1
Extension Analog-IO V1.1

EAN number:		4260363246958
HS-code:		85423190

Alternativen

9205
EtherSens Oxygen zirconium-probe
OxygenServiceController 100% - 10E-24%

by e-mail

2808,00 €
plus VAT. and shipping

9206
EtherSens Oxygen Plum-O2-cell
with Plum-O2-cell 100% - 0%

by e-mail

476,00 €
plus VAT. and shipping

9101
Zirconium/platinum-probe with heater

by e-mail

2438,00 €
plus VAT. and shipping

9101.2
OSM sensor
Plum - O2 - Cell

by e-mail

211,00 €
plus VAT. and shipping

9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug

by e-mail

59,00 €
plus VAT. and shipping

9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1

by e-mail

11,00 €
plus VAT. and shipping

9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning

by e-mail

11,00 €
plus VAT. and shipping

9636-TCPIP.02M
Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1

by e-mail

15,00 €
plus VAT. and shipping

9352-WLAN-ANT
Magnetic base antenna
for S7-WLAN-Bridge, WLAN-Klemme, EtherSens cable length: 3m

by e-mail

83,00 €
plus VAT. and shipping

9636-TCPIP.1M
Patch-cable 1m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1

by e-mail

15,00 €
plus VAT. and shipping

9230-SD-32
Micro-SD-card 32GB
for EtherSens-devices SDHC class 10

by e-mail

27,00 €
plus VAT. and shipping

9230-AIO
Extension Analog-IO V1.0
Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W

by e-mail

128,00 €
plus VAT. and shipping

9220-SEG-ANZEIGE
Segment-display for EtherSens
4 Digit 14 segment-display WHITE 0,56" high in wall-mounting case 5V DC supply (from I2C-interfaceport) I2C-connection

by e-mail

158,00 €
plus VAT. and shipping

9220-GYRO-SENS-313
Gyro-Sensor 313 for EtherSens
Measuring range: ±0.5g / ±1g / ±2g / ±4g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-GYRO-SENS-312
Gyro-Sensor 312 for EtherSens
Measuring range: ±1.5g / ±3g / ±6g / ±12g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-T-LF-D
Temp./humidity/air-pressure for EtherSens
Measuring range: Temperature: -40 ...+85°C Humidity: 0...100% relative Feuchte Pressure: 300...1100 hPa 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-SONNE
Sun-light-sensor for EtherSens
max. 220k Lux (switchable ranges) 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-U-I-BOX
U-I-box for EtherSens
max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m

by e-mail

158,00 €
plus VAT. and shipping

9230-LTE
Extension LTE-modem
LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet Power consumption: 6,5W

by e-mail

264,00 €
plus VAT. and shipping

9230-EI2C-5V
Extension with ext. galv. separated I2C 5V
Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V Power consumption: 2W

by e-mail

117,00 €
plus VAT. and shipping

9230-EI2C-3.3V
Extension with ext. galv. separated I2C 3.3V
Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V Power consumption: 2W

by e-mail

117,00 €
plus VAT. and shipping

9230-MIO-485
Extension RS485-IO
Extensionboard for EtherSens-devices V1.0 for RS485 Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-MIO-TTY
Extension TTY-IO
Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-MIO-232
Extension RS232-IO
Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-MIO-422
Extension RS422-IO
Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-AIO-V1.1
Extension Analog-IO V1.1
Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W

by e-mail

149,00 €
plus VAT. and shipping

9230-RIO-230V
Extension 230V Relay-IO
Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A Power consumption: 2,5W

by e-mail

227,00 €
plus VAT. and shipping

9230-RIO-24V
Extension 24V Relay-IO
Extension-board for EtherSens-devices Supply voltage: 24V DC 4 x relay-OUT 230VAC/16A Power consumption: 4W

by e-mail

170,00 €
plus VAT. and shipping

9230-GG
Bigger Case
Width 90mm instead of 45mm

by e-mail

106,00 €
plus VAT. and shipping

9230-DIO
Extension Digital-IO
Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software Power consumption: 4W

by e-mail

191,00 €
plus VAT. and shipping

9230-USB
Extension USB-port
USB-port for EtherSens-devices (data storage) Extension for: - DB-backup/restoure-function - CSV-recording Maximum current: 200mA for 5V DC

by e-mail

105,00 €
plus VAT. and shipping

Extend your EtherSens-device with analogue input/output:
Depending on the target device, 9230-GG may have to be used additionally!


Supply voltage:	24V DC +/- 20%
Power consumption:	4 watt
Interfaces:	4 x Analogue Input V1.1 (switchable between U, I, differential) - Free configurable voltage-inputs with full 15-bit resolution: 0-50V, 0-40V, 0-20V, 0-10V, 0-5V, 0-4V, 0-2V, 0-1V, 0-0,5V, 0-0,25V - Free configurable differential voltage-inputs with full 15-bit resolution AI1 <-> AI2 and AI3 <-> AI4: +/-50V, +/-40V, +/-10V, +/-5V, +/-4V, +/-2V, +/-1V, +/-0,5V, +/-0,25V - Free configurable current-inputs with full 15-bit resolution: 0-20mA, 4-20mA - sample-rate of AD-converter can be selected: - fast = fast conversion / short precision - balanced = middle conversion / middle precision - exact = slow conversion / high precision - Measuring ranges after changing are calibrated to: - offset for 0V / 0mA - slope of voltage / current (ideal for end of measuring-range / full-scale) - Relative values can be configured to the original voltage- / current-values. For e.g.: On the voltage-input 10V were measured 5V, relative minimum = 0 kg, relative maximum = 100 kg, so the displayed-value is 50 kg Is minimum and maximum configured as 0 the measured voltage- / current-value will be displayed. 4 x analogue Output 0/4-20mA (source-power 24V)
Handling/Configuration:	WEB-Browser
Operating temperature:	0 - 55°C
Case:	PlugIn-board
Dimensions:	74,9 x 86 x 20 mm

Scope of delivery:	PlugIn-board Installation into the EtherSens-device

Extension Analog-IO V1.1

Alternativen

Automatic-mode

Main downloads

Versionstory

Other downloads

Documentation

Extension

Support-videos

Support

Newsletter

About us