MPI/PPI

Programming adapter S7

	MPI/PPI	MPI - II	MPI - USB	MPI - LAN	S7 - USB	S7 - LAN	S7 - BRIDGE	S7 - GATE	S7 - LAN++
PPI-Bus
PPI 9.6 KBit/s - 19.2 KBit/s	x	x	x	x	x	x	x	x	x
Multimaster 9.6 KBit/s - 187.5 KBit/s		x	x	x	x	x	x	x	x
MPI-Bus
19.2 KBit/s	x	x	x	x	x	x	x	x	x
187.5 KBit/s	x	x	x	x	x	x	x	x	x
1.5 MBit/s		x	x	x	x	x	x	x	x
Profibus
9.6 KBit/s		x	x	x	x	x	x	x	x
19.2 KBit/s	x	x	x	x	x	x	x	x	x
45.45 KBit/s		x	x	x	x	x	x	x	x
93.75 KBit/s		x	x	x	x	x	x	x	x
187.5 KBit/s	x	x	x	x	x	x	x	x	x
500 KBit/s		x	x	x	x	x	x	x	x
1.5 MBit/s		x	x	x	x	x	x	x	x
3.0 MBit/s		x	x	x	x	x	x	x	x
6.0 MBit/s		x	x	x	x	x	x	x	x
12.0 MBit/s		x	x	x	x	x	x	x	x
Profibus-profile
DP	x(12)	x	x	x	x	x	x	x	x
standard	x(12)	x	x	x	x	x	x	x	x
universal(DP/FMS)		x	x	x	x	x	x	x	x
RS 232
9.6 KBit/s	x(19)	x(19)
19.2 KBit/s	x	x
38.4 KBit/s	x	x
57.6 KBit/s	x(9)	x(9)
115.2 KBit/s	x(9)	x(9)
USB
USB 1.1 (6)		x(1)	x		x(2)
LAN
10/100BaseTx				x(7)		x	x	x	x
WIFI
2.4 GHz							x
TeleService operation
with S7-300/400	x(14)(18)	x(14)(18)
baud rates at TS-operation directly at the PC
9.6 KBit/s	x	x
19.2 KBit/s	x	x
38.4 KBit/s	x(8)	x(8)
57.6 KBit/s	x(8)	x(8)
baud rates at TS-operation directly with a modem
9.6 KBit/s	x	x
19.2 KBit/s	x	x
38.4 KBit/s	x	x
57.6 KBit/s	x	x
115.2 KBit/s	x	x
HMI
9.6 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
19.2 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
38.4 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
57.6 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
115.2 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
update
firmware-update	x(10)	x(10)	x(15)	x(15)	x(15)	x(15)	x(15)	x(15)	x(15)
input/online help
keypad		x	x	x		x(21)	x(21)	x(21)	x(21)
display	x	x	x	x		x(21)	x(21)	x(21)	x(21)
PD connections (maximum)
PLCVCOM		1	1	1	1	1	1	1	1
RFC1006				8		8	32	32	32
AG connections (maximum)
passive subscriber	1	15	15	15	15	15	15	15	15
active subscriber	126	126	126	126	126	126	126	126	126
more functions
integrated PLC-firewall							x	x	x
display diagnostic-buffer in the webbrowser							x	x	x
webserver for configuration				x		x	x	x	x
Remote access over existing VPN-channel				x		x	x	x	x
Access via existing WLAN-channel				x		x	x	x	x
status/control variable				x		x	x	x	x
S7 on S7/S5 DB exchange				x		x	x	x	x
S5 on MPI DB exchange		only as S5toMPI
S7 on MPI (Send/Fetch)				x		x	x	x	x
Profinet Gateway				x		x	x	x	x
Time in PLC from NTP-server				x		x	x	x	x
galvanic separation
to the bus (screen connected through)	1KV	1KV	1KV	1,5KV	1KV	1,5KV	1,5KV	1,5KV	1,5KV
mounting
wall monuting (with opt. wall mounting-set)	x	x	x	x
upgrading with
CheapConn+cable	x	x	x	x
supports
WIN 98	x	x(3)		x		x	x	x	x
WIN 98 SE	x	x	x	x	x	x	x	x	x
WIN ME	x	x	x	x	x	x	x	x	x
WIN NT	x	x(5)	x(5)	x	x(5)
WIN 2000	x	x	x	x	x	x	x	x	x
WIN XP Home (4)	x	x	x	x	x	x	x	x	x
WIN XP Professional	x	x	x	x	x	x	x	x	x
Vista(32bit)	x	x	x	x	x	x	x	x	x
Win7(32bit)	x	x	x	x	x	x	x	x	x
Win7(64bit)	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win8/8.1	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win10	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win11	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
(1) just with USB-cable plug <-> plug, type A <-> A, item number: 9352.1 (2) just with USB-cable plug <-> plug, type A <-> mini B, item number: 9352.3 (3) only serial communication (4) Siemens Step7 V5.2 and higher dont run with this operationing system (5) USB-communication is only possible with the special driver for Win NT (6) USB 2.0 is backward compatible to 1.1 (7) Cable is designed for direct connection to PC network card socket. It can also be a hub / switch with uplink port or operated at a hub / switch with automatic detection of assignement and adaptation (8) only in combination with the MPI-Speed-driver („continously-active“) (9) Siemens Step7 supports these baud rates only with the MPI-Speed-Utility (10) Update directly with PC or via Tele-Network if the cable is connected to a device of the Tele-Network-family (Tele-Link, Tele-Book or Tele-Professional) (11) only in the mode: MultiMaster-Mode (12) up to a maximum baud rate of 187.5 KBit/s (13) In this transmission, the baud rate is irrelevant, because it communicates via a virtual COM-port. (14) with the use of the TS-adapter / item number: 9350.TS (15) Update directly with PC and TIC-driver (18) Operation requires Step 7 with additional software Tele-Service (TS) from Siemens (19) only at PPI-communication possible (20) Only with TIC-driver (21) with integrated webserver possible (22) No support of Siemens Step7-software possible (23) Only with USB and with TIC-driver

• Automatic protocol- and baud rate detection (depends on the used product from 9K6 to 187K5)
• Connects only to the bus when it is requested by PG
• Firmwareupdate via internet for free
• PPI - adapter for S7 - 200
• MPI/Profibus - adapter for S7 - 300 + 400
• CE/EMC compliant construction
• All intelligent MPI-interface-products including a free OPC-server license "OPC-Manager lite" [limited to 100 items]
• All products, including the examples and demo-version of communication driver as download on the product-site

• Integrated display for output of diagnostic informations
• Applicable as TS/HMI adapter
• Double-sided connected cable

The MPI/PPI-cable Art.No. 9350 connects the programming-device or the PC via the serial interface (COM-connection) with the MPI-interface of an S7-300/400 or with the PPI-interface of an S7-200. The cable automatically detects when plugging in the PLC which PLC-type is connected. The baud-rate (9600 - 115200 bps) of the PC is also detected automatically. The scope of delivery includes the MPI-Speed-driver for the Step7-software from Siemens. This allows the baud-rate on the PC-side to be set to 115.2 KBaud. Otherwise use the standard Siemens baud-rate (maximum 38400). The power-supply gets the MPI/PPI-cable from the PLC and thus requires no external supply. All voltages are galvanically isolated from each other (24V input to the bus and to the internal electronics).
To bridge long distances to a PLC, the optional MPI-NETZ-adapter can be used to feed the 24V.

Other supported applications:

• HMI (Human Machine Interface)
• TS (Tele Service)

HMI:
The HMI-variant enables the connection of a control-panel (which does not have an internal MPI-interface, but the HMI-protocol and an RS232-interface) to an S7-300/400. The cable is plugged in between the control-panel and the PLC. The HMI-protocol must be part of the control-panel.
TS:
The TS-variant enables the connection of a modem so that a connection to an S7-300/400 can be established on the PC with the aid of a second modem. The cable is plugged in between the modem and the PLC. In the TS-variant, the PC/MPI-adapter is compatible with the Siemens TS-adapter.

Connecting the adapter
The cable is plugged with the short side into the MPI- or PPI-interface of the PLC. The MPI/PPI-cable is supplied from the PLC and requires no external supply. The cable always needs a PLC because it needs its 24V (or optionally the MPI-NETZ-adapter). The longer cable side is plugged into the PG or into the PC at its COM-port. As soon as the adapter is energized, it will display its software version and begin the functional test of its internal components. It then checks whether the cable is connected to a controller with MPI or PPI bus and adapts to the respective transmission variant. The display window of the MPI/PPI-cable contains all relevant data. In the case of an MPI-connection, the cable automatically finds out and sets the baud-rate parameters for the programming device (PC) during a PG access.

Supply voltage:	24V DC +/- 20%
Power consumption:	2 watt
Display:	double lined LCD-display
Handling/Configuration:	Kabelmanager-Software
Interfaces:	to the PLC: PPI/MPI-bus interface: 9,6 KBd - 187,5 KBd to the PD/PC: RS232: 9,6 KBd - 115,2 KBd
Galvanic separation:	1000V PPI/MPI-bus to the PC
Operating temperature:	0 - 55°C
Case:	ABS-plastic case
Dimensions:	146 x 41 x 29 mm
Scope of delivery:	MPI/PPI-cable

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

RS232

MPI-II
Universal S7interface-cable +++ RS232/USB to PPI/MPI/PROFIBUS +++ For HMI-USB applications +++ Bus-status on display

S5toMPI
Connects the S5-PLC with a S7-PLC

All prices plus costs of delivery, shipping insurance and VAT.