S7-LAN connector for Siemens S7 PLC controller

Remote maintenance

	TELE LINK NETWORK
	TELE-PROF-II	TELE-PROF	TELE-BOOK	MPI-Modem	TELEService	S5-LAN	S7-LAN	TeleRouter
secured modem-protocol	✓	✓	✓
additional software needed				Siemens TS -Software	Siemens TS -Software	VPN-Client	VPN-Client
Providing WinTELEPROF-software	✓	✓	✓
modem	analogue/ISDN	analogue	opt. via PCMCIA	analogue/GSM	analogue/ISDN/GSM	internet-connection	internet-connection	internet-connection
modem for world wide use	✓	✓	✓	✓	✓
interfaces
MPI/Profibus	9600-12MBd			9600-12MBd	9600-12MBd		9600-12MBd
RS232	2x	2x	2x	1x	1x
TTY	2x	2x	2x			1x
PCMCIA	2x (optionally)	1x	1x
Ethernet	10/100BaseTx					1x	1x	5x
USB	2x				1x
LCD-display	✓	✓	✓	✓	instead 10 LEDs	instead status-LED	instead webserver	instead webserver
supported PLC-protocols *
S7	✓	✓	✓	✓	✓		✓
S5	✓	✓ (optional)	✓ (optional)			✓
Pilz PSS	✓	✓ (optional)	✓ (optional)
Allen-Bradley	✓	✓ (optional)	✓ (optional)
AEG		✓ (optional)	✓ (optional)
Bosch		✓ (optional)	✓ (optional)
Telemecanique		✓ (optional)	✓ (optional)
GE-Fanuc		✓ (optional)	✓ (optional)
Klöckner-Moeller		✓ (optional)	✓ (optional)
Mitsubishi		✓ (optional)	✓ (optional)
SMS-sending/Pager(S5/S7)	✓	✓	✓		✓ (no pager)			only for analogue / ISDN
HMI-messaging module(S5/S7)	✓							✓
SMS-receive with GSM					✓
DTMF with analogue					✓
e-mail-dispatch	✓				✓			✓
FAX-dispatch(S5/S7)	✓	✓ (optional)	✓ (optional)					only for analogue / ISDN
PLC-data coupling(S5/S7)	✓	✓ (optional)	✓ (optional)			✓	✓
ASCII-transfer from S5/S7	✓	✓ (optional)	✓ (optional)			only with ASCII-LAN
internet-coupling	✓
Usage as dial-up-router	✓							✓
power supply	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC
dimensions w x h x d (in mm)	High: 67 x 280 x 170 FLAT: 300 x 175 x 70	300 x 175 x 66	235 x 162 x 37	90 x 162 x 54	40 x 125 x 115	42 x 15 x 65	65 x 43 x 17	154 x 92 x 28
* other PLC types on request

Novelty:
Variant with integrated access-protection LAN <=> bus-side as well as output of diagnostic-buffer in web-site

Networking of SIMATIC S7-PLCs (S7-200/300/400) without Ethernet-CP/CP-communicationprocessor standard-TCP/IP without changes to the hardware-configuration or PLC-program.
Compact and robust Ethernet-converter (MPI / PROFIBUS / PPI - Ethernet).
Similar to "IBH Link S7++" (IBH-Link-S7-PP, 20266), "NETLink PRO Compact", "ACCON-NetLink-PRO compact" or "NL 50-MPI".
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET function.
By plugging the module onto the PPI, MPI or Profibus, this connection becomes an Ethernet port for the Industrial IoT with significant cost savings.
Thanks to the integrated multiplexer, this connection becomes a port for all supported protocols. Simultaneous and parallel communications such as WinCC, PUT/GET from S7 PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step7, TIA Portal or PG2000.

Advantages:

Simple and fast networking
Multiplexer for all protocols
Integration as S7 controller with CP 343-1
Access to S7 data via S7-TCP/IP with PUT/GET
Module search without "annoying" network-card-selection
Free virtual-com-port for non-Step7-applications
Qualified support
Comprehensive documentation
No SimaticNet required for operation/configuration
STEP7 64-bit support
Integration into the TIA-Portal
Supports DHCP

Connectivity:

S7-LAN module directly connected to the PC/device with a patch cable
S7-LAN module directly connected to the PC/device with a crosslink cable
S7-LAN connected to the PC/device via a switch or hub

Features:

every SIMATIC-S7 (S7-200/300/400) into Network
SIMATIC S7-protocols (S7Comm and ISO-on-TCP (RFC 1006))
Ethernet-RJ45 socket with 10/100 MBit/s with autonegotiation
Commissioning is very simple: plug it into the PPI, MPI-bus or PROFIBUS of the SIMATIC S7 controller and start working
Integrated multiplexer (visualization, programming, remote maintenance and simultaneous use of all protocols without special configuration), also via standard router
Parallel use of the channels (simultaneously 8 x channels for programming, visualization and remote maintenance can be used directly/routed)
Supported controllers (S7-200, S7-300, S7-400, FM modules, Sinamix, Sinumerik, MicroMaster and other drives/converters (such as SEW-EURODRIVE converters)
Supported data areas (inputs, outputs, markers, data blocks, timers and counters)
Supported scenarios (programming adapter for S7 programming packages, access to the S7 data via S7-TCP/IP with PUT/GET and routing of SIMATIC S7 controllers as well as time server for time and also bus diagnostics)
Supported platforms (S7-TCPIP RFC1006 communication platform-independent, communication driver/configuration tool TIC for Windows XP, Win7/8/10/11)
Replacement for CP343-1/443-1 or IE/PB-Link, connected directly to MPI or Profibus (inexpensive)
with Profibus for S7-300 faster than CP343-1
PG/PC-adapter for Simatic-Manager Step7 and TIA-portal
fastest installation into Network (less than 3 minutes)
automatic detection of baudrate
automatic usement of cyclic bus-parameter-protocols
no bus-knowledge required / automatic-protocol and baud-rate detection
download TIC-driver for STEP-7/TIA-Portal
Programming and visualization at the same time (8 S7-connections (direct / routed) at the same time)
compatible to S7-TCP/IP RFC1006, WinCC (flex), OPC UA with Universal communication Industry 4.0, the IP-S7LINK SDK as well as all common OPC-servers
no HW-Config change necessary
no change of PLC-software necessary
including Classic OPC-DA-Server-lite (max. 100 variables)
with PG-diagnostic-port (occupied slot with 9pin PG-port free again)
DPV1-master of class 2 and supports all functions that a PG supports:

Diagnosis, configuration and programming of controllers (via software such as Simatic-Manager, TIA-Portal)

Diagnosis and configuration of DP-slaves (via software such as Starter)

active module, no influencing other bus users in the system
active PUT/GET (in module integrated) replaces expensive CP´s for PLC-couplings
Supply from S7-PLC or 24V DC external
CE/EMC compliant design
Scope of delivery (TIC driver, module itself and quick start guide)
Search for modules across all Network-cards (no Network-card-selection as with other providers)
Variable status in web interface
RFC1006 connection status
PLC-time via PG-protocol
TCPIP-device writes/reads DB in S7-PLC
Bus-diagnostics (output of error-counters, spikes)
RFC1006 for S7-200 (1. Generation)
virtual COM-port-driver for other serial S7-applications
Standard HMI-applications can read/write data via RFC1006 and the module

Applications:

Operational data collection, SCADA of non-networkable controllers
KTP-panel to S7-PLC with MPI-/Profibus-interface
PUT/GET from S7-1500/1200/300/400 (PN-CPU or with ethernet-CP) with specified and unspecified connection
VPN(Virtual Private Network)-remote-maintenance, maintenance of the PLC via the Internet
cyclic time reading from NTP-server and setting in the connected PLC
coupling with DB-transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or also S5-Gateway
any TCP-device writes/reads DBs in the S7-300/400 controller
monitor variables in the WebServer without a Step7 programming-package
analysis option of the connected bus-system with spikes- and errors-counter
Parameterization of field devices and drives (DPV1)
With IP-S7-Link-DLL high-level languages-access
PLC-PLC-communication (regardless of subnet boundaries, prolongation MPI/DP-bus over network)

TIC-(Totally Integrated Communication)-driver for Step7/TIA-Portal for Win XP/VISTA/7/8/10/11 32/64 Bit:
TIC firmware / configuration-tool / Step7-/TIA-driver

Product overview:

S7-LAN is a reliable and handy S7-network-adapter for PPI-,MPI- and PROFIBUS. Designed for 24/7-operation. The compact design in the PROFIBUS-connector-case and the power supply directly from the MPI/DP-port of the CPU allow to be connected a PLC to the network in less than 3 minutes.
bus protocols/bus profile, incl. baudrate and HSA are recognized independently and automatically and configured.
HMI-devices, for e.g. actual panel-series, as well as any other S7-Ethernet device, direct connect per S7-TCP-IP.
With TIC-driver (configurations-tool and driver) from download-area without changes on the project of Siemens TIA, Simatic Step7 Manager and WinCC-projects communication.
Another advantage is the easy handling of the S7-LAN. The convenient configuration is carried out directly in STEP7 or the PG/PC-interface-dialog. The detection of whether the S7-LAN is connected to a 10 MBit or 100 MBit network takes place automatically. Power is supplied directly from the MPI / DP interface. The connection to passive participants or VIPA-PLC is possible via the integrated 24V-plug.
The S7-LAN is connected to the bus-socket of the PLC and via the hub or directly to the PC. Then install the TIC-driver on the PC. Assign the IP-address with the TIC-configuration-program and go ONLINE. The installation process is completed so quickly.

Configuration:

S7-LAN is designed for quick commissioning. After the module has been plugged into the bus or externally supplied with 24V DC, only an IP address is assigned via the TIC-driver or directly via the Web-interface . The controllers can then be accessed from the network.
With the TIC-driver, there is no need for any additional installation outside of the Siemens world. The configuration takes place directly in the PG-PC interface settings and is therefore optimally integrated. Any network device that speaks S7-TCP/IP RFC1006, such as HMI-devices or PGs, can access the module directly.
In the S7-project itself, the adapter can be integrated using a placeholder entry. This is not a must, operation without project change is possible immediately. The S7-communication runs directly via S7-TCP/IP and expands each MPI-/PROFIBUS with a network gateway. It doesn't matter which control types (S7-200 / S7-300 / S7-400) are connected to the fieldbus of the PLC network.


Supply voltage:	9354-CONNECT: 24V DC +/- 20% USB (from PC/power-pack) 9354-CONNECT-LTE: 24V DC +/- 20% 9352-LANCON: 24V DC +/- 20% 9359-LAN: 24V DC +/- 20%
Power consumption:	9354-CONNECT: 2 Watt 9354-CONNECT-LTE: 12 Watt 9352-LANCON: 2 Watt 9359-LAN: 2 Watt
Display:	WEB-Browser (for 9354-CONNECT, 9354-CONNECT-LTE, 9352-LANCON) status LEDs
Handling/Configuration:	9354-CONNECT + 9354-CONNECT-LTE: WEB-Browser 9352-LANCON: WEB-Browser TIC-software 9359-LAN: Reset-switch (factory setting) S5-LAN-manager
Interfaces:	9354-CONNECT: 2 x 10/100BaseTX RJ45-ethernet-plug Antenna-connector RP-SMA(f) (2.4 GHz IEEE 802.11b/g) 9354-CONNECT-LTE: 2 x 10/100BaseTX RJ45-ethernet-plug Antenna-connector RP-SMA(f) (2.4 GHz IEEE 802.11b/g) Antenna-connector RP-SMA(f) (FDD LTE:B1/B3/B8 - TDD LTE:B38/B39/B40/B41 - TDSCDMA:B34/B39 - UMTS:B1/B8 - GSM:900/1800MHz) 9352-LANCON: to the PLC: PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd to the PD/PC: PD/diagnosis jack 10/100BaseTX RJ45-ethernet jack 9359-LAN: to the PLC: TTY/20mA current loop (S5-LAN activ, S5-PLC passive) to the PD/PC: 10/100BaseTX RJ45-ethernet jack
Operating temperature:	0 - 55°C
Case:	9354-CONNECT + 9354-CONNECT-LTE: ABS-plastic table-case 9352-LANCON: ABS-plastic case 9359-LAN: ABS-plastic case
Dimensions:	9354-CONNECT + 9354-CONNECT-LTE: 115 x 95 x 30 mm 9352-LANCON: 63 x 43 x 17 mm 9359-LAN: 42 x 65 x 15 mm

Scope of delivery:	1x 9354-CONNECT 1x 9354-CONNECT-LTE 1x 9352-LANCON 1x 9359-LAN 2x WIFI-stub-antenna 1x Antenne 4G, Tilt joint, black 4x small power plug 2x LAN-cable 3m 2x plug-in power-supply 24V DC 625mA 1x Transporting suitcase for FACTORY 1x SIM-card for LTE-internet-connection (only for monthly rent)

All prices plus costs of delivery, shipping insurance and VAT.

alternatives:

9354-CONNECT
CONNECT-Remote-Access
With ACBT through firewall +++ No PC on site required +++ Without IT-knowledge to Internet +++ Independent of OS +++ Remotemaintenance wo. portals +++ Remote-control made easy

by e-mail

369,00 €
plus VAT. and shipping

9354-CONNECT-HS
CONNECT-Remote-Access DIN-Rail-mounting
With ACBT through firewall +++ No on-site PC necessary +++ Internet without IT-knowledge