S7-LAN connector for Siemens S7 PLC controller

S5

	PG-UNI / PG-UNI-II	S5-LAN++	S5-BRIDGE	PG-USB	PG-COM	PG-ISO-SET
device type
S5-90U	x	+ext. 24V	+ext. 24V	x	x	x
S5-95U	x	+ext. 24V	+ext. 24V	x	x	x
S5-100U	x	+ext. 24V(3)	+ext. 24V	x	x	x
S5-115U	at 944 + 9359-8	at 944 + 9359-8 + ext. 24V (4)	x	x	x	x
S5-135U	at 928B + 9359-8	at 928B + 9359-8 +ext. 24V (6)	x	x	x	x
S5-155U	x	x	x	x	x	x
S5-AG110S	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG130W/B	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG150A/K/S/U	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
CP-143	x			x		x
CP-521	+CP521 adapter					+CP521 adapter(1)
CP-523	+CP523 adapter					+CP523 adapter(1)
CP-525	+9359-5			+9359-5-USB		+9359-5(1)
CP-526	x			x		x
CP-527	x			x		x
CP-528	x			x		x
CP-544	x (7)			x (7)		x (7)
CP-5430	x			x		x
CP-5431	x
IP-246	x			x		x
IP-247	x			x		x
IP-252	x			x		x
IP-266	+9359-4			x		+9359-4(1)
WF-470	+9359-4 + 9359-5-WF470			+9359-5-WF470-USB		+9359-5-WF470 + 9359-4(1)
SIN-805	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-820	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-840	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-850	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-880	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
Connection on PC	RS232-port	Ethernet RJ45	Ethernet RJ45 / WLAN/WIFI	USB-port type A	RS232-port	RS232-port
max. prolongation:	300m (UNI-extension)	300m (S5-LAN-extension) +ext. 24V	100m (PG-USB-extension)		300m (UNI-extension)
(1) ISO adapter can not be used because the required supply voltage on the PG interface of the module is not present. (2) At the CPU 6ES5 102-8MA02 Release 3 is a PG-ISO-Adapter or Netz-Adapter additional required. (3) With S5-LAN++ from HW V2.3 [2010] the "Netz-Adapter" is no more needed, this version has included current-sources. (4) With S5-LAN++ from HW V2.3 [2010] no accessories are needed, this version has included current-sources. (5) With S5-LAN++ from HW V2.3 [2010] the Sinum-Adapter 9359-6-USB is needed. (6) Only for CPU928B with PG-ISO-Adapter and ext. 24V DC, unless there is an S5-LAN++ from HW V2.3 [2010] used. (7) CP544 has bolts at the programming-interface. The products do not fit 100% on this interface. (8) With S5-BRIDGE the Sinum-Adapter 9359-6-USB is needed.

Novelty:
Variant with integrated access-protection LAN <=> bus-side as well as output of diagnostic-buffer in web-site

Networking of SIMATIC S7-PLCs (S7-200/300/400) without Ethernet-CP/CP-communicationprocessor standard-TCP/IP without changes to the hardware-configuration or PLC-program.
Compact and robust Ethernet-converter (MPI / PROFIBUS / PPI - Ethernet).
Similar to "IBH Link S7++" (IBH-Link-S7-PP, 20266), "NETLink PRO Compact", "ACCON-NetLink-PRO compact" or "NL 50-MPI".
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET function.
By plugging the module onto the PPI, MPI or Profibus, this connection becomes an Ethernet port for the Industrial IoT with significant cost savings.
Thanks to the integrated multiplexer, this connection becomes a port for all supported protocols. Simultaneous and parallel communications such as WinCC, PUT/GET from S7 PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step7, TIA Portal or PG2000.

Advantages:

• Simple and fast networking
• Multiplexer for all protocols
• Integration as S7 controller with CP 343-1
• Access to S7 data via S7-TCP/IP with PUT/GET
• Module search without "annoying" network-card-selection
• Free virtual-com-port for non-Step7-applications
• Qualified support
• Comprehensive documentation
• No SimaticNet required for operation/configuration
• STEP7 64-bit support
• Integration into the TIA-Portal
• Supports DHCP

Connectivity:

• S7-LAN module directly connected to the PC/device with a patch cable
• S7-LAN module directly connected to the PC/device with a crosslink cable
• S7-LAN connected to the PC/device via a switch or hub

Features:

• every SIMATIC-S7 (S7-200/300/400) into Network
• SIMATIC S7-protocols (S7Comm and ISO-on-TCP (RFC 1006))
• Ethernet-RJ45 socket with 10/100 MBit/s with autonegotiation
• Commissioning is very simple: plug it into the PPI, MPI-bus or PROFIBUS of the SIMATIC S7 controller and start working
• Integrated multiplexer (visualization, programming, remote maintenance and simultaneous use of all protocols without special configuration), also via standard router
• Parallel use of the channels (simultaneously 8 x channels for programming, visualization and remote maintenance can be used directly/routed)
• Supported controllers (S7-200, S7-300, S7-400, FM modules, Sinamix, Sinumerik, MicroMaster and other drives/converters (such as SEW-EURODRIVE converters)
• Supported data areas (inputs, outputs, markers, data blocks, timers and counters)
• Supported scenarios (programming adapter for S7 programming packages, access to the S7 data via S7-TCP/IP with PUT/GET and routing of SIMATIC S7 controllers as well as time server for time and also bus diagnostics)
• Supported platforms (S7-TCPIP RFC1006 communication platform-independent, communication driver/configuration tool TIC for Windows XP, Win7/8/10/11)
• Replacement for CP343-1/443-1 or IE/PB-Link, connected directly to MPI or Profibus (inexpensive)
• with Profibus for S7-300 faster than CP343-1
• PG/PC-adapter for Simatic-Manager Step7 and TIA-portal
• fastest installation into Network (less than 3 minutes)
• automatic detection of baudrate
• automatic usement of cyclic bus-parameter-protocols
• no bus-knowledge required / automatic-protocol and baud-rate detection
• download TIC-driver for STEP-7/TIA-Portal
• Programming and visualization at the same time (8 S7-connections (direct / routed) at the same time)
• compatible to S7-TCP/IP RFC1006, WinCC (flex), OPC UA with Universal communication Industry 4.0, the IP-S7LINK SDK as well as all common OPC-servers
• no HW-Config change necessary
• no change of PLC-software necessary
• including Classic OPC-DA-Server-lite (max. 100 variables)
• with PG-diagnostic-port (occupied slot with 9pin PG-port free again)
• DPV1-master of class 2 and supports all functions that a PG supports:
• Diagnosis, configuration and programming of controllers (via software such as Simatic-Manager, TIA-Portal)
• Diagnosis and configuration of DP-slaves (via software such as Starter)
• active module, no influencing other bus users in the system
• active PUT/GET (in module integrated) replaces expensive CP´s for PLC-couplings
• Supply from S7-PLC or 24V DC external
• CE/EMC compliant design
• Scope of delivery (TIC driver, module itself and quick start guide)
• Search for modules across all Network-cards (no Network-card-selection as with other providers)
• Variable status in web interface
• RFC1006 connection status
• PLC-time via PG-protocol
• TCPIP-device writes/reads DB in S7-PLC
• Bus-diagnostics (output of error-counters, spikes)
• RFC1006 for S7-200 (1. Generation)
• virtual COM-port-driver for other serial S7-applications
• Standard HMI-applications can read/write data via RFC1006 and the module

Applications:

• Operational data collection, SCADA of non-networkable controllers
• KTP-panel to S7-PLC with MPI-/Profibus-interface
• PUT/GET from S7-1500/1200/300/400 (PN-CPU or with ethernet-CP) with specified and unspecified connection
• VPN(Virtual Private Network)-remote-maintenance, maintenance of the PLC via the Internet
• cyclic time reading from NTP-server and setting in the connected PLC
• coupling with DB-transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or also S5-Gateway
• any TCP-device writes/reads DBs in the S7-300/400 controller
• monitor variables in the WebServer without a Step7 programming-package
• analysis option of the connected bus-system with spikes- and errors-counter
• Parameterization of field devices and drives (DPV1)
• With IP-S7-Link-DLL high-level languages-access
• PLC-PLC-communication (regardless of subnet boundaries, prolongation MPI/DP-bus over network)

TIC-(Totally Integrated Communication)-driver for Step7/TIA-Portal for Win XP/VISTA/7/8/10/11 32/64 Bit:
TIC firmware / configuration-tool / Step7-/TIA-driver

Product overview:

S7-LAN is a reliable and handy S7-network-adapter for PPI-,MPI- and PROFIBUS. Designed for 24/7-operation. The compact design in the PROFIBUS-connector-case and the power supply directly from the MPI/DP-port of the CPU allow to be connected a PLC to the network in less than 3 minutes.
bus protocols/bus profile, incl. baudrate and HSA are recognized independently and automatically and configured.
HMI-devices, for e.g. actual panel-series, as well as any other S7-Ethernet device, direct connect per S7-TCP-IP.
With TIC-driver (configurations-tool and driver) from download-area without changes on the project of Siemens TIA, Simatic Step7 Manager and WinCC-projects communication.
Another advantage is the easy handling of the S7-LAN. The convenient configuration is carried out directly in STEP7 or the PG/PC-interface-dialog. The detection of whether the S7-LAN is connected to a 10 MBit or 100 MBit network takes place automatically. Power is supplied directly from the MPI / DP interface. The connection to passive participants or VIPA-PLC is possible via the integrated 24V-plug.
The S7-LAN is connected to the bus-socket of the PLC and via the hub or directly to the PC. Then install the TIC-driver on the PC. Assign the IP-address with the TIC-configuration-program and go ONLINE. The installation process is completed so quickly.

Configuration:

S7-LAN is designed for quick commissioning. After the module has been plugged into the bus or externally supplied with 24V DC, only an IP address is assigned via the TIC-driver or directly via the Web-interface . The controllers can then be accessed from the network.
With the TIC-driver, there is no need for any additional installation outside of the Siemens world. The configuration takes place directly in the PG-PC interface settings and is therefore optimally integrated. Any network device that speaks S7-TCP/IP RFC1006, such as HMI-devices or PGs, can access the module directly.
In the S7-project itself, the adapter can be integrated using a placeholder entry. This is not a must, operation without project change is possible immediately. The S7-communication runs directly via S7-TCP/IP and expands each MPI-/PROFIBUS with a network gateway. It doesn't matter which control types (S7-200 / S7-300 / S7-400) are connected to the fieldbus of the PLC network.

Supply voltage:	24V DC +/- 20%
Power consumption:	3 watt
Display:	status-LED
Handling/Configuration:	reset-switch-key (factory setting) S5-LAN Manager website-configuration
Interfaces:	to the PLC: TTY/20mA current loop (S5-LAN activ, S5-PLC passive) to the PD/PC: 10/100BaseTX RJ45-ethernet jack Antenna-plug RP-SMA(f) (IEEE 802.11 b/g/n)
Operating system:	Configuration and operation via virtual COM-interface: MS-Windows XP/2000/7/8/10/11/Server Operation via TCP/IP server: any operating system with a TCP/IP stack
Operating temperature:	0 - 55°C
Case:	ABS-plastic case
Dimensions:	100 x 58 x 21 mm
Scope of delivery:	S5-BRIDGE-module WIFI-stub antenna Power connector 2pins small

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

S5 over LAN

S5-LAN++
Network-connection for the S5-PLC +++ Network to PG-interface +++ Of developer and manufacturer +++ Remotemaintenance via Internet +++ S5 (CP-343-1 compatible)

S5 over WLAN/WIFI

WLAN/WIFI-SETs
Service-suitcase for couppling to a PLC over LAN/WLAN incl. all accessories

S5-Ethernet-CPs
Over WLAN to ethernet-communications-modules

All prices plus costs of delivery, shipping insurance and VAT.