S7-LAN connector for Siemens S7 PLC controller
Network-connection for the S7-200/300/400-PLC +++ S7-adapter PPI/MPI/PROFIBUS +++ Of developer and manufacturer +++ Smallest Ethernet-gateway S7 +++ Network for each S7-PLC +++ Fast commissioning +++ Replacement for CP343-1/443-1
single license
Novelty:Variant with integrated access-protection LAN <=> bus-side as well as output of diagnostic-buffer in web-site
Networking of SIMATIC S7-PLCs (S7-200/300/400) without Ethernet-CP/CP-communicationprocessor standard-TCP/IP without changes to the hardware-configuration or PLC-program.
Compact and robust Ethernet-converter (MPI / PROFIBUS / PPI - Ethernet).
Similar to "IBH Link S7++" (IBH-Link-S7-PP, 20266), "NETLink PRO Compact", "ACCON-NetLink-PRO compact" or "NL 50-MPI".
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET function.
By plugging the module onto the PPI, MPI or Profibus, this connection becomes an Ethernet port for the Industrial IoT with significant cost savings.
Thanks to the integrated multiplexer, this connection becomes a port for all supported protocols. Simultaneous and parallel communications such as WinCC, PUT/GET from S7 PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step7, TIA Portal or PG2000.
Advantages:
more...
variants:
ARTNR: 9851-STARTER
Starter package PG-2000 STEP5-STL w. PG-USB 3m
421,00 € plus VAT. and shipping
ARTNR: 9851-STARTER
Starter package PG-2000 STEP5-STL w. PG-USB 3m
EAN number: | 4260363243957 | |
HS-code: | 85234990 |
Zeller Presscontrol Systems und Automatisierungstechnik e.K.
Wiesensteig
www.zeller-presscontrol.com
Novelty:
Variant with integrated access-protection LAN <=> bus-side as well as output of diagnostic-buffer in web-site
Networking of SIMATIC S7-PLCs (S7-200/300/400) without Ethernet-CP/CP-communicationprocessor standard-TCP/IP without changes to the hardware-configuration or PLC-program.
Compact and robust Ethernet-converter (MPI / PROFIBUS / PPI - Ethernet).
Similar to "IBH Link S7++" (IBH-Link-S7-PP, 20266), "NETLink PRO Compact", "ACCON-NetLink-PRO compact" or "NL 50-MPI".
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET function.
By plugging the module onto the PPI, MPI or Profibus, this connection becomes an Ethernet port for the Industrial IoT with significant cost savings.
Thanks to the integrated multiplexer, this connection becomes a port for all supported protocols. Simultaneous and parallel communications such as WinCC, PUT/GET from S7 PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step7, TIA Portal or PG2000.
Advantages:
Connectivity:
Features:
TIC-(Totally Integrated Communication)-driver for Step7/TIA-Portal for Win XP/VISTA/7/8/10/11 32/64 Bit:
TIC firmware / configuration-tool / Step7-/TIA-driver
bus protocols/bus profile, incl. baudrate and HSA are recognized independently and automatically and configured.
HMI-devices, for e.g. actual panel-series, as well as any other S7-Ethernet device, direct connect per S7-TCP-IP.
With TIC-driver (configurations-tool and driver) from download-area without changes on the project of Siemens TIA, Simatic Step7 Manager and WinCC-projects communication.
Another advantage is the easy handling of the S7-LAN. The convenient configuration is carried out directly in STEP7 or the PG/PC-interface-dialog. The detection of whether the S7-LAN is connected to a 10 MBit or 100 MBit network takes place automatically. Power is supplied directly from the MPI / DP interface. The connection to passive participants or VIPA-PLC is possible via the integrated 24V-plug.
The S7-LAN is connected to the bus-socket of the PLC and via the hub or directly to the PC. Then install the TIC-driver on the PC. Assign the IP-address with the TIC-configuration-program and go ONLINE. The installation process is completed so quickly.
With the TIC-driver, there is no need for any additional installation outside of the Siemens world. The configuration takes place directly in the PG-PC interface settings and is therefore optimally integrated. Any network device that speaks S7-TCP/IP RFC1006, such as HMI-devices or PGs, can access the module directly.
In the S7-project itself, the adapter can be integrated using a placeholder entry. This is not a must, operation without project change is possible immediately. The S7-communication runs directly via S7-TCP/IP and expands each MPI-/PROFIBUS with a network gateway. It doesn't matter which control types (S7-200 / S7-300 / S7-400) are connected to the fieldbus of the PLC network.
Licensing process:
Free download of the complete range of functions
with 10 minutes duration and first network is
editable:
/9352-LANCON_s7-lan.html/9851-STARTER_starterpakete.html/
Order by email to verkauf@process-informatik.de
You will receive a license-file to copy it into the
installation folder, so that the program is licensed.
Variant with integrated access-protection LAN <=> bus-side as well as output of diagnostic-buffer in web-site
Networking of SIMATIC S7-PLCs (S7-200/300/400) without Ethernet-CP/CP-communicationprocessor standard-TCP/IP without changes to the hardware-configuration or PLC-program.
Compact and robust Ethernet-converter (MPI / PROFIBUS / PPI - Ethernet).
Similar to "IBH Link S7++" (IBH-Link-S7-PP, 20266), "NETLink PRO Compact", "ACCON-NetLink-PRO compact" or "NL 50-MPI".
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET function.
By plugging the module onto the PPI, MPI or Profibus, this connection becomes an Ethernet port for the Industrial IoT with significant cost savings.
Thanks to the integrated multiplexer, this connection becomes a port for all supported protocols. Simultaneous and parallel communications such as WinCC, PUT/GET from S7 PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step7, TIA Portal or PG2000.
Advantages:
- Simple and fast networking
- Multiplexer for all protocols
- Integration as S7 controller with CP 343-1
- Access to S7 data via S7-TCP/IP with PUT/GET
- Module search without "annoying" network-card-selection
- Free virtual-com-port for non-Step7-applications
- Qualified support
- Comprehensive documentation
- No SimaticNet required for operation/configuration
- STEP7 64-bit support
- Integration into the TIA-Portal
- Supports DHCP
Connectivity:
- S7-LAN module directly connected to the PC/device with a patch cable
- S7-LAN module directly connected to the PC/device with a crosslink cable
- S7-LAN connected to the PC/device via a switch or hub
Features:
- every SIMATIC-S7 (S7-200/300/400) into Network
- SIMATIC S7-protocols (S7Comm and ISO-on-TCP (RFC 1006))
- Ethernet-RJ45 socket with 10/100 MBit/s with autonegotiation
- Commissioning is very simple: plug it into the PPI, MPI-bus or PROFIBUS of the SIMATIC S7 controller and start working
- Integrated multiplexer (visualization, programming, remote maintenance and simultaneous use of all protocols without special configuration), also via standard router
- Parallel use of the channels (simultaneously 8 x channels for programming, visualization and remote maintenance can be used directly/routed)
- Supported controllers (S7-200, S7-300, S7-400, FM modules, Sinamix, Sinumerik, MicroMaster and other drives/converters (such as SEW-EURODRIVE converters)
- Supported data areas (inputs, outputs, markers, data blocks, timers and counters)
- Supported scenarios (programming adapter for S7 programming packages, access to the S7 data via S7-TCP/IP with PUT/GET and routing of SIMATIC S7 controllers as well as time server for time and also bus diagnostics)
- Supported platforms (S7-TCPIP RFC1006 communication platform-independent, communication driver/configuration tool TIC for Windows XP, Win7/8/10/11)
- Replacement for CP343-1/443-1 or IE/PB-Link, connected directly to MPI or Profibus (inexpensive)
- with Profibus for S7-300 faster than CP343-1
- PG/PC-adapter for Simatic-Manager Step7 and TIA-portal
- fastest installation into Network (less than 3 minutes)
- automatic detection of baudrate
- automatic usement of cyclic bus-parameter-protocols
- no bus-knowledge required / automatic-protocol and baud-rate detection
- download TIC-driver for STEP-7/TIA-Portal
- Programming and visualization at the same time (8 S7-connections (direct / routed) at the same time)
- compatible to S7-TCP/IP RFC1006, WinCC (flex), OPC UA with Universal communication Industry 4.0, the IP-S7LINK SDK as well as all common OPC-servers
- no HW-Config change necessary
- no change of PLC-software necessary
- including Classic OPC-DA-Server-lite (max. 100 variables)
- with PG-diagnostic-port (occupied slot with 9pin PG-port free again)
- DPV1-master of class 2 and supports all functions that a PG supports:
- Diagnosis, configuration and programming of controllers (via software such as Simatic-Manager, TIA-Portal)
- Diagnosis and configuration of DP-slaves (via software such as Starter)
- active module, no influencing other bus users in the system
- active PUT/GET (in module integrated) replaces expensive CP´s for PLC-couplings
- Supply from S7-PLC or 24V DC external
- CE/EMC compliant design
- Scope of delivery (TIC driver, module itself and quick start guide)
- Search for modules across all Network-cards (no Network-card-selection as with other providers)
- Variable status in web interface
- RFC1006 connection status
- PLC-time via PG-protocol
- TCPIP-device writes/reads DB in S7-PLC
- Bus-diagnostics (output of error-counters, spikes)
- RFC1006 for S7-200 (1. Generation)
- virtual COM-port-driver for other serial S7-applications
- Standard HMI-applications can read/write data via RFC1006 and the module
Applications:
- Operational data collection, SCADA of non-networkable controllers
- KTP-panel to S7-PLC with MPI-/Profibus-interface
- PUT/GET from S7-1500/1200/300/400 (PN-CPU or with ethernet-CP) with specified and unspecified connection
- VPN(Virtual Private Network)-remote-maintenance, maintenance of the PLC via the Internet
- cyclic time reading from NTP-server and setting in the connected PLC
- coupling with DB-transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or also S5-Gateway
- any TCP-device writes/reads DBs in the S7-300/400 controller
- monitor variables in the WebServer without a Step7 programming-package
- analysis option of the connected bus-system with spikes- and errors-counter
- Parameterization of field devices and drives (DPV1)
- With IP-S7-Link-DLL high-level languages-access
- PLC-PLC-communication (regardless of subnet boundaries, prolongation MPI/DP-bus over network)
TIC-(Totally Integrated Communication)-driver for Step7/TIA-Portal for Win XP/VISTA/7/8/10/11 32/64 Bit:
TIC firmware / configuration-tool / Step7-/TIA-driver
Product overview:
S7-LAN is a reliable and handy S7-network-adapter for PPI-,MPI- and PROFIBUS. Designed for 24/7-operation. The compact design in the PROFIBUS-connector-case and the power supply directly from the MPI/DP-port of the CPU allow to be connected a PLC to the network in less than 3 minutes.bus protocols/bus profile, incl. baudrate and HSA are recognized independently and automatically and configured.
HMI-devices, for e.g. actual panel-series, as well as any other S7-Ethernet device, direct connect per S7-TCP-IP.
With TIC-driver (configurations-tool and driver) from download-area without changes on the project of Siemens TIA, Simatic Step7 Manager and WinCC-projects communication.
Another advantage is the easy handling of the S7-LAN. The convenient configuration is carried out directly in STEP7 or the PG/PC-interface-dialog. The detection of whether the S7-LAN is connected to a 10 MBit or 100 MBit network takes place automatically. Power is supplied directly from the MPI / DP interface. The connection to passive participants or VIPA-PLC is possible via the integrated 24V-plug.
The S7-LAN is connected to the bus-socket of the PLC and via the hub or directly to the PC. Then install the TIC-driver on the PC. Assign the IP-address with the TIC-configuration-program and go ONLINE. The installation process is completed so quickly.
Configuration:
S7-LAN is designed for quick commissioning. After the module has been plugged into the bus or externally supplied with 24V DC, only an IP address is assigned via the TIC-driver or directly via the Web-interface . The controllers can then be accessed from the network.With the TIC-driver, there is no need for any additional installation outside of the Siemens world. The configuration takes place directly in the PG-PC interface settings and is therefore optimally integrated. Any network device that speaks S7-TCP/IP RFC1006, such as HMI-devices or PGs, can access the module directly.
In the S7-project itself, the adapter can be integrated using a placeholder entry. This is not a must, operation without project change is possible immediately. The S7-communication runs directly via S7-TCP/IP and expands each MPI-/PROFIBUS with a network gateway. It doesn't matter which control types (S7-200 / S7-300 / S7-400) are connected to the fieldbus of the PLC network.
Licensing process:
Free download of the complete range of functions
with 10 minutes duration and first network is
editable:
/9352-LANCON_s7-lan.html/9851-STARTER_starterpakete.html/
Order by email to verkauf@process-informatik.de
You will receive a license-file to copy it into the
installation folder, so that the program is licensed.
Programming/controlling of S5/S7[FREEWARE without support]-PLC’s
Program change on your systems and no original programming-package?
With PG-2000, a universal programming system for S5 and S7 controllers [S7 FREEWARE without support], you can make changes to the controllers yourself.
Connect the PC with the appropriate interface-product via the COM-, USB- or LAN-port.
One surface for S5- and S7-programming [S7 FREEWARE without support] so you don't have to get used to it. Windows as the operating-system, work
with every current version of Windows. Where the original programming packages no longer works, work with PG-2000 ONLINE.
Remote maintenance of a S7-PLC[FREEWARE without support]
You have to solve a problem in the PLC-program, but the installation is not placed nearby? No problem, start your PG-2000-software with "option teleservice", activate your modem and after selection
intra PG-2000-software access to the PLC is possible as if being on-site.
Data logging of your PLC
You shortly need a logging of your PLC’s operating states respectively are on the way of figuring out a problem and have no datalogger? No problem, connect the PC, start the PG-2000-software
with "option datalogger", define relevant variables, appoint timestamp and then the recording starts running immediately. The data will be stored on the fixed disc according to the configuration.
Backup of formulas without knowledge of PLC
You consistently have to back up formulas which are stored in data blocks or back up production protocols, but the employee in charge has no knowledge of PLC-programming respectively handling
PC-programs? No problem, install the PG-2000-software with "option DB-backup" on your PC and connect it with the PLC. The employee only has to click on a symbol on the desktop of the PC and the
data blocks of the parameterised PLC will be stored on the fixed disc. Afterwards the program closes itself and the mentioned employee didn’t had to accomplish an intervention on the program.
Project/history-administration of PLC-programming
Who doesn’t know this? When accessing the PLC you find out that parts of the program flow has been changed and none of the colleagues/employees are responsible for it? Therefore install the
"option controller" for the PG-2000-software, and every activity of the employees working with the program will be recorded. So you can identify the one employee very quickly and changes are ex
post comprehensible, too.
All prices plus costs of delivery, shipping insurance and VAT.
Extensions:
212,00 €
plus VAT. and shipping
plus VAT. and shipping
737,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
9851-CTR-2
PG-2000 option Controller subsequent license
comfortable Projekt / History - administration
PG-2000 option Controller subsequent license
comfortable Projekt / History - administration
71,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
71,00 €
plus VAT. and shipping
plus VAT. and shipping
635,00 €
plus VAT. and shipping
plus VAT. and shipping
635,00 €
plus VAT. and shipping
plus VAT. and shipping
71,00 €
plus VAT. and shipping
plus VAT. and shipping
9858-2
PG-2000 option H1 subsequent license
programming over Network-adapter supported OS: only Win XP
PG-2000 option H1 subsequent license
programming over Network-adapter supported OS: only Win XP
105,00 €
plus VAT. and shipping
plus VAT. and shipping
302,00 €
plus VAT. and shipping
plus VAT. and shipping
71,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
71,00 €
plus VAT. and shipping
plus VAT. and shipping
635,00 €
plus VAT. and shipping
plus VAT. and shipping
635,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
71,00 €
plus VAT. and shipping
plus VAT. and shipping
635,00 €
plus VAT. and shipping
plus VAT. and shipping
103,00 €
plus VAT. and shipping
plus VAT. and shipping
635,00 €
plus VAT. and shipping
plus VAT. and shipping
All prices plus costs of delivery, shipping insurance and VAT.
421,00 €
plus VAT. and shipping
plus VAT. and shipping
450,00 €
plus VAT. and shipping
plus VAT. and shipping
728,00 €
plus VAT. and shipping
plus VAT. and shipping
792,00 €
plus VAT. and shipping
plus VAT. and shipping
821,00 €
plus VAT. and shipping
plus VAT. and shipping
1099,00 €
plus VAT. and shipping
plus VAT. and shipping
Programming-software PG-2000 Step5 & Step7
Complete package
STEP5/7 for Windows-PCs +++ Original S5D-/S7P-file-format +++ STL/LAD/CSF in one package +++ Step5 also for Win7/8/10/11 +++ Easy system for windows +++ Complete package
STEP5/7 for Windows-PCs +++ Original S5D-/S7P-file-format +++ STL/LAD/CSF in one package +++ Step5 also for Win7/8/10/11 +++ Easy system for windows +++ Complete package
Basic packages AWL
STEP5/7 for Windows-PCs +++ Original S5D-/S7P-file-format +++ Expandable with FUP/CSF
STEP5/7 for Windows-PCs +++ Original S5D-/S7P-file-format +++ Expandable with FUP/CSF
STEP 7 (Freeware)
Free Step7 for Windows-PCs +++ Original S7P-file-format +++ Freeware without supporting
Free Step7 for Windows-PCs +++ Original S7P-file-format +++ Freeware without supporting
All prices plus costs of delivery, shipping insurance and VAT.
304,00 €
plus VAT. and shipping
plus VAT. and shipping
145,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
212,00 €
plus VAT. and shipping
plus VAT. and shipping
Automatic-mode
Main downloads
- S5-LAN-Manager inclusive firmware-files windows (any)
- S5-PATCH windows (any) V1.24
- PLCVCOM 32-/64-bit windows (any) V2.83
- PG-2000 windows (any) V6.02
- Hardware-Configurator windows (any) V1.31
- PG-2000 training windows (any)
- USB-driver (only WinXP)
- USB-driver windows (any) without XP V1.11
- PLCVCom 32bit only Win98SE, Me, NT and 2000 V2.71
Versionstory
- Release-docu 3964R-LAN-firmware
- Release-docu ASCII-LAN-firmware
- Release-docu Multi-VCom
- Release-docu PG-2000
- Release-docu PLCVCom
- Release-docu S5-H1-PG-LAN-firmware
- Release-docu S5-LAN++-firmware
- Release-docu S5-LAN-Manager
- Release-docu S5-LAN-PATH-firmware
- Release-docu S5-Patch
- Release-docu S5-PG-LAN-firmware
- Release-docu S5-VCom
- Release-docu USB-driver