S7-GATE connector with integrated firewall for Siemens S7-PLCs - Process Informatik Entwicklungsgesellschaft mbH

S7-GATE connector with integrated firewall for Siemens S7-PLCs

Smallest S7-PLC-Firewall +++ Controls access to the PPI/MPI/PROFIBUS +++ Of developer and manufacturer

Supply voltage: 24V DC
4 x Relay-OUT 230VAC/16A

LAN and WIFI-interface integrated
function to the same time

Features:

S7-PLC-Firewall in the form of a bus plug
Monitors/regulates Network-accesses on the connected PPI-, MPI- Profibus
Display of PLC diagnostic buffer in the WebServer
Built-in PG diagnostic socket
Parameterization via integrated WebServer
Standard functions like S7-LAN connector

The PLC-firewall monitors:

more...

variants:

381,00 € plus VAT. and shipping

ARTNR: 9200-R-24V
EtherSens Control 24V Relay-IO

EAN number:		4260363244398
HS-code:		85423190
Weight:		0.2 kg

Features:

S7-PLC-Firewall in the form of a bus plug
Monitors/regulates Network-accesses on the connected PPI-, MPI- Profibus
Display of PLC diagnostic buffer in the WebServer
Built-in PG diagnostic socket
Parameterization via integrated WebServer
Standard functions like S7-LAN connector

The PLC-firewall monitors:

IP-addresses, i.e. it determines which IP-address is allowed to access the connected bus and which is not

Write/read access to variables/data areas of the individual bus-participants

PG functions allowed/prohibited depending on the IP-address

Data backup S5-PLC on FTP-Server
Produkbild

S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on FTP-server

Data backup S5-PLC on FTP-server via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to FTP-server

Data backup S5-PLC on SD-card
Produkbild

S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on SD-card

Data backup S5-PLC on SD-card via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to SD-card

Data backup S5-PLC on USB-stick
Produkbild

S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on USB-stick

Data backup S5-PLC on USB-stick via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to USB-stick

Data backup S7-PLC PN-port on FTP-server
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via PN-port on FTP-server

Data backup S7-PLC PN-port on FTP-server via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PN-port to FTP-server

Data backup S7-PLC PN-port on SD-card
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via PN-port on SD card

Data backup S7-PLC PN-port on SD-card via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PN-port to SD-card

Data backup S7-PLC PN-port on USB-stick
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via PN-port to USB-stick

DB-Backup/Restore S7-PLC PN-port on USB-stick via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via PN-port to USB-stick

Data backup S7-PLC over MPI/Profibus on FTP-server
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on FTP-server

Data backup S7-PLC over MPI/Profibus on FTP-server via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to FTP-server

Data backup S7-PLC over MPI/Profibus on SD-card
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on SD-card

Data backup S7-PLC over MPI/Profibus on SD-card via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to SD-card

Data backup S7-PLC over MPI/Profibus on USB-stick
Produkbild

S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on USB-stick

Data backup S7-PLC over MPI/Profibus on USB-stick via dig. IO
Produkbild

Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to USB-stick

Data acquisition/logging
Produkbild

By connecting a line-recorder to the EtherSens-device anyone without network-knowledge can visually capture and further process the log.

Capture data and control independently
Produkbild

Apply small control tasks of your systems with EtherSens-Control-devices. Determine switching points where the device is running to respond. Depending on the parameterization, an email or SMS notification (depending on the device-configuration) or the device automatically controls via the optional IO-modules (analog / digital / relay).


Supply voltage:	24V DC +/- 20%
Power consumption:	6 watt
Display:	WEB-Browser 1 status LED bicolor
Handling/Configuration:	WEB-Browser
Interfaces:	4 x Relais-Output 230VAC/16A Slot for microSD Antenna-connector SMA(f) (2.4 GHz IEEE 802.11b/g) 10/100BaseTX RJ45-ethernet-plug Button for factory settings
Overvoltage category:	CAT IV
Insulation value network <=> mains voltage:	1,5 KV
Operating temperature:	0 - 55°C
Case:	ABS-plastic case V0
Dimensions:	100 x 112 x 45 mm

Scope of delivery:	EtherSens Control WIFI-stub-antenna

All prices plus costs of delivery, shipping insurance and VAT.

accessories:

9391.1
24V DC power-supply unit 625mA
Primary 110V - 240 VAC Euro+USA-plug

by e-mail

59,00 €
plus VAT. and shipping

9230-SD-32
Micro-SD-card 32GB
for EtherSens-devices SDHC class 10

by e-mail

27,00 €
plus VAT. and shipping

9230-ANT-WAND
Stationary Wifi-antenna for wall fastening
for EtherSens-devices, cable length: 5m for indoor and outdoor use incl. bracket

by e-mail

84,00 €
plus VAT. and shipping

9240-SDÜ
Option Safe S7-PLC-data-transmission
Function extension for recognition of save data-transmission by toggle bit or counters in the S7-PLC. In case of a failure, a default configuration is mapped to the outputs.

by e-mail

99,00 €
plus VAT. and shipping

9636-TCPIP.1M
Patch-cable 1m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1

by e-mail

15,00 €
plus VAT. and shipping

9352-WLAN-ANT
Magnetic base antenna
for S7-WLAN-Bridge, WLAN-Klemme, EtherSens cable length: 3m

by e-mail

83,00 €
plus VAT. and shipping

9636-TCPIP.02M
Patch-cable 0.25m, Cat5e, shielded
RJ45 plug <=> RJ45 plug, 1:1

9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning

9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1

9230-LTE-ANTW
Stationary LTE-antenna for fixed mounting
for EtherSens-devices LTE-modem cable length: 2m

by e-mail

163,00 €
plus VAT. and shipping

extensions:

9230-AIO
Extension Analog-IO V1.0
Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W

by e-mail

128,00 €
plus VAT. and shipping

9230-EI2C-5V
Extension with ext. galv. separated I2C 5V
Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V Power consumption: 2W

by e-mail

117,00 €
plus VAT. and shipping

9230-LTE
Extension LTE-modem
LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet Power consumption: 6,5W

by e-mail

264,00 €
plus VAT. and shipping

9230-ENERGY
Extension Energy-IO
Extension-board for EtherSens-devices Energy-analysis (EN 50470-1 EN 50470-3) L1, L2, L3, N realtime analysis Up to 8000 measurements / second Hz / cos phi / power-factor Energy consumption kWh For Rogwski-coils up to 0,5V

by e-mail

352,00 €
plus VAT. and shipping

9220-U-I-BOX
U-I-box for EtherSens
max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m

by e-mail

158,00 €
plus VAT. and shipping

9220-SONNE
Sun-light-sensor for EtherSens
max. 220k Lux (switchable ranges) 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-GYRO-SENS-312
Gyro-Sensor 312 for EtherSens
Measuring range: ±1.5g / ±3g / ±6g / ±12g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-GYRO-SENS-313
Gyro-Sensor 313 for EtherSens
Measuring range: ±0.5g / ±1g / ±2g / ±4g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-T-LF-D
Temp./humidity/air-pressure for EtherSens
Measuring range: Temperature: -40 ...+85°C Humidity: 0...100% relative Feuchte Pressure: 300...1100 hPa 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m

by e-mail

105,00 €
plus VAT. and shipping

9220-SEG-ANZEIGE
Segment-display for EtherSens
4 Digit 14 segment-display WHITE 0,56" high in wall-mounting case 5V DC supply (from I2C-interfaceport) I2C-connection

by e-mail

158,00 €
plus VAT. and shipping

9230-EI2C-3.3V
Extension with ext. galv. separated I2C 3.3V
Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V Power consumption: 2W

by e-mail

117,00 €
plus VAT. and shipping

9230-MIO-485
Extension RS485-IO
Extensionboard for EtherSens-devices V1.0 for RS485 Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-MIO-TTY
Extension TTY-IO
Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-DIO
Extension Digital-IO
Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software Power consumption: 4W

by e-mail

191,00 €
plus VAT. and shipping

9230-GG
Bigger Case
Width 90mm instead of 45mm

by e-mail

106,00 €
plus VAT. and shipping

9230-RIO-24V
Extension 24V Relay-IO
Extension-board for EtherSens-devices Supply voltage: 24V DC 4 x relay-OUT 230VAC/16A Power consumption: 4W

by e-mail

170,00 €
plus VAT. and shipping

9230-RIO-230V
Extension 230V Relay-IO
Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A Power consumption: 2,5W

by e-mail

227,00 €
plus VAT. and shipping

9230-NT-230V
Power-supply-rack-unit 230V
Input voltage: 100 - 240VAC 50-60Hz Output voltage: 24V DC Power: 4W

by e-mail

68,00 €
plus VAT. and shipping

9230-AIO-V1.1
Extension Analog-IO V1.1
Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W

by e-mail

149,00 €
plus VAT. and shipping

9230-MIO-422
Extension RS422-IO
Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-MIO-232
Extension RS232-IO
Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) Power consumption: 2W

by e-mail

158,00 €
plus VAT. and shipping

9230-USB
Extension USB-port
USB-port for EtherSens-devices (data storage) Extension for: - DB-backup/restoure-function - CSV-recording Maximum current: 200mA for 5V DC

S7-GATE connector with integrated firewall for Siemens S7-PLCs

Smallest S7-PLC-Firewall +++ Controls access to the PPI/MPI/PROFIBUS +++ Of developer and manufacturer

accessories:

extensions:

Differences

Automatic-mode

Main downloads

Versionstory

Other downloads

Documentation

Extension

Support-videos

Support

Newsletter

About us