Cookies helfen uns bei der Bereitstellung unserer Dienste. Durch die Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies setzen.
Cookies help us in providing our services. By using our services, you agree that we set cookies.
OK
TINA - mobile intelligent network-analyser - Process Informatik Entwicklungsgesellschaft mbH

TINA - mobile intelligent network-analyser Download


Simple Network-troubleshooting +++ Webserver operation/control +++ Networkanalysis 10/100 MBit without effort +++ To PC with 2,4 GHz +++ Detection network violations +++ Resolve IP-address conflicts +++ PROFINET monitori

Energy-analysis (EN 50470-1 EN 50470-3)
L1, L2, L3, N realtime analysis
Up to 8000 measurements / second
Hz / cos phi / power-factor
Energy consumption kWh
Only LAN-interface
For folding-cores with 1A secundary-current

Features:
  • Non-reactive recording of Ethernet communication

  • Secure and passive decoupling of telegrams

  • Monitors all OSI layers starting from layer 2 and packets of all sizes and types and VLAN traffic


    more...
    678,00 € plus VAT. and shipping
    ARTNR: 9202-OW
    EtherSens Energy for folding-cores only with LAN
    EAN number: 4260363247269
    HS-code: 85423190
    Weight: 0.3 kg


    Features:
    • Non-reactive recording of Ethernet communication

    • Secure and passive decoupling of telegrams

    • Monitors all OSI layers starting from layer 2 and packets of all sizes and types and VLAN traffic

    • For 10 or 100Mbit/s

    • To monitoring-PC with WIFI 2,4 GHz

    • Complete operation (display and parameterization) via web server via WLAN.
      • No extra recording devices and no cumbersome analysis software must be installed.
      • Perfect for mobile devices.

    • Immediate e-mail alerting for surveillance violations.
      • Thanks to immediate alerting, with freely adjustable violations, not network error will be missed again.
      • By using the timestamp exact identifying the point of the network error in the analysis will be no problem any more .

    • Display of subscriber connections (which subscriber accesses which subscriber).
      • M2M connections are now transparent! TINA shows exactly who communicates with whom at the IP level . Missing or incorrect network connections can be determined directly.
      • Inconsistencies in accessing certain subnets ? We will show each connection directly with source and destination address incl. all data.

    • Simple Exchange of IP addresses in order to be able to communicate with the device in another subnet (eg S7-LAN).
      • For IP address conflicts TINA can intervene directly and change the "wrong" IP address directly.
      • Regardless of whether devices are hanging in direct access or are removed, thanks to network protocol transmission , values ??for the corresponding device can be changed directly in the TINA web server.

    • Read and write Wireshark files
      • For later post-processing or for sharing with others, the recording format is 100% Wireshark compatible . This allows a later evaluation on each PC, detached from the recording hardware.
      • Wireshark records can also be imported into the TINA interface for comparison or verification.

    • Network tools like Ping, Traceroute, ... integrated
      • Full function of all popular "fast" analysis functions as you know from the PC.

    Product Overview:
    TINA is a handy device for analyzing network problems and network conflicts .
    The device is plugged directly into the network cable without any further switches or peripherals.
    With user rights and password protection, access via both LAN and WLAN is possible and well secured.
    No PC with installed software is required for operation, the complete configuration and recording process takes place in the integrated web server.
    Surveillance violations are reported directly by e-mail, special rules therefore can be specifically assigned.

    Thanks to TINA, it´s now possible to find network problems and analyze network errors in a few minutes coupled with immediately bug fixing.
    The network analysis includes functions such as IP conflicts, SUB-NET errors, runtime errors, missing subscribers due to subscriber failure and much more.



    Application areas:
    • Exposure of burglary and unauthorized access to your company network.
    • Help with commissioning, third-party machines can be analyzed and adjusted.
    • Analysis of VoIP protocols and audio voice output in case of problems with your telephone system
    • Detecting Address Conflicts
    • Find and analyze network problems and fix them directly.
    • Check LAN connections for your failure risk ( Re-transmission ...)
    • Search, scan and exchange IP addresses and record their communication.
    • monitoring of complete network segments.


    Configuration:
    A configuration interface created for common systems eliminates the need for a long time in the system.
    Most settings in the network area are quick and easy to set even for inexperienced users.




    Thanks to free creatable rules and monitoring modes no unauthorized access and no unauthorized device escapes the attention.
    The entire control and release monitoring must also be set directly in the web server like the rest of the configuration.



    Recording and analysis directly in the web server, also for mobile devices:
    Network analyzes and recordings can be started and operated directly in the web server.



    Network packets are recorded and displayed in detail and divided into categories.



    All settings are optimized for fast and easy operation.
    Control surfaces extra large and simple, so the network analysis can also be performed with smartphones .
    Data backup S5-PLC on FTP-Server
    Produkbild

    S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on FTP-server

    Data backup S5-PLC on FTP-server via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to FTP-server

    Data backup S5-PLC on SD-card
    Produkbild

    S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on SD-card

    Data backup S5-PLC on SD-card via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to SD-card

    Data backup S5-PLC on USB-stick
    Produkbild

    S5-PLC triggered DB-backup/-restore without additional PC via PG-socket and Ethernet on USB-stick

    Data backup S5-PLC on USB-stick via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via PG-socket and Ethernet to USB-stick

    Data backup S7-PLC PN-port on FTP-server
    Produkbild

    S7-PLC triggered DB-backup/-restore without additional PC via PN-port on FTP-server

    Data backup S7-PLC PN-port on FTP-server via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via PN-port to FTP-server

    Data backup S7-PLC PN-port on SD-card
    Produkbild

    S7-PLC triggered DB-backup/-restore without additional PC via PN-port on SD card

    Data backup S7-PLC PN-port on SD-card via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via PN-port to SD-card

    Data backup S7-PLC PN-port on USB-stick
    Produkbild

    S7-PLC triggered DB-backup/-restore without additional PC via PN-port to USB-stick

    DB-Backup/Restore S7-PLC PN-port on USB-stick via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via PN-port to USB-stick

    Data backup S7-PLC over MPI/Profibus on FTP-server
    Produkbild

    S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on FTP-server

    Data backup S7-PLC over MPI/Profibus on FTP-server via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to FTP-server

    Data backup S7-PLC over MPI/Profibus on SD-card
    Produkbild

    S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on SD-card

    Data backup S7-PLC over MPI/Profibus on SD-card via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to SD-card

    Data backup S7-PLC over MPI/Profibus on USB-stick
    Produkbild

    S7-PLC triggered DB-backup/-restore without additional PC via MPI/Profibus on USB-stick

    Data backup S7-PLC over MPI/Profibus on USB-stick via dig. IO
    Produkbild

    Via digital input triggered DB-backup/-restore without additional PC via MPI/Profibus to USB-stick

    Supply voltage: 100 - 240V AC, 50 - 60 Hz
    Power consumption: 5 watt
    Measurement:
    • Supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards
    • Compatible with 3-phase, 3- or 4-wire (delta or wye), and other 3-phase services
    • Supplies total (fundamental and harmonic) active, reactive and apparent energy, and fundamental active/reactive energy on each phase and on the overall system
    • Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C
    • Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C
    • Supports current transformer and di/dt current sensors
    • Dedicated ADC channel for neutral current input
    • Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C
    • Supplies sampled waveform data on all three phases and on neutral current
    Display: WEB-Browser
    1 status LED bicolor
    Handling/Configuration: WEB-Browser
    Interfaces: 4 x voltage-input (L1, L2, L3, N)
    4 x distributor-terminal
    4 x sensor-input folding-core secondary max. 1A (L+K- / B+W-terminal ever phase + N)
    Slot for microSD
    10/100BaseTX RJ45-ethernet-plug
    Button for factory settings
    Overvoltage category: CAT IV
    Insulation value
    network <=> mains voltage:     		1,5 KV
    Operating temperature: 0 - 55°C
    Case: ABS-plastic case V0
    Dimensions: 100 x 112 x 45 mm
     
    Scope of delivery: EtherSens Energy
    All prices plus costs of delivery, shipping insurance and VAT.

    sensors:

    9220-10
    Folding-core current-sensor 100/1A
    Cable hole: 17x17mm Opening / closing with a handle Output Terminals Output overvoltage protection
    Quickbestellung INFOMAIL
    by e-mail
    50,00 €
    plus VAT. and shipping


    9220-11
    Folding-core current-sensor 60/1A
    Cable hole: 17x17mm Opening / closing with a handle Output Terminals Output overvoltage protection
    Quickbestellung INFOMAIL
    by e-mail
    50,00 €
    plus VAT. and shipping


    extensions:

    9230-AIO
    Extension Analog-IO V1.0
    Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W
    Quickbestellung INFOMAIL
    by e-mail
    128,00 €
    plus VAT. and shipping


    9220-SEG-ANZEIGE
    Segment-display for EtherSens
    4 Digit 14 segment-display WHITE 0,56" high in wall-mounting case 5V DC supply (from I2C-interfaceport) I2C-connection
    Quickbestellung INFOMAIL
    by e-mail
    158,00 €
    plus VAT. and shipping


    9220-GYRO-SENS-313
    Gyro-Sensor 313 for EtherSens
    Measuring range: ±0.5g / ±1g / ±2g / ±4g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
    Quickbestellung INFOMAIL
    by e-mail
    105,00 €
    plus VAT. and shipping


    9220-GYRO-SENS-312
    Gyro-Sensor 312 for EtherSens
    Measuring range: ±1.5g / ±3g / ±6g / ±12g 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
    Quickbestellung INFOMAIL
    by e-mail
    105,00 €
    plus VAT. and shipping


    9220-T-LF-D
    Temp./humidity/air-pressure for EtherSens
    Measuring range: Temperature: -40 ...+85°C Humidity: 0...100% relative Feuchte Pressure: 300...1100 hPa 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
    Quickbestellung INFOMAIL
    by e-mail
    105,00 €
    plus VAT. and shipping


    9220-SONNE
    Sun-light-sensor for EtherSens
    max. 220k Lux (switchable ranges) 3.3V DC supply (from I2C-interfaceport) I2C-connection 1m
    Quickbestellung INFOMAIL
    by e-mail
    105,00 €
    plus VAT. and shipping


    9220-U-I-BOX
    U-I-box for EtherSens
    max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m
    Quickbestellung INFOMAIL
    by e-mail
    158,00 €
    plus VAT. and shipping


    9230-LTE
    Extension LTE-modem
    LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet Power consumption: 6,5W
    Quickbestellung INFOMAIL
    by e-mail
    264,00 €
    plus VAT. and shipping


    9230-EI2C-5V
    Extension with ext. galv. separated I2C 5V
    Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V Power consumption: 2W
    Quickbestellung INFOMAIL
    by e-mail
    117,00 €
    plus VAT. and shipping


    9230-EI2C-3.3V
    Extension with ext. galv. separated I2C 3.3V
    Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V Power consumption: 2W
    Quickbestellung INFOMAIL
    by e-mail
    117,00 €
    plus VAT. and shipping


    9230-MIO-485
    Extension RS485-IO
    Extensionboard for EtherSens-devices V1.0 for RS485 Power consumption: 2W
    Quickbestellung INFOMAIL
    by e-mail
    158,00 €
    plus VAT. and shipping


    9230-MIO-TTY
    Extension TTY-IO
    Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) Power consumption: 2W
    Quickbestellung INFOMAIL
    by e-mail
    158,00 €
    plus VAT. and shipping


    9230-MIO-232
    Extension RS232-IO
    Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) Power consumption: 2W
    Quickbestellung INFOMAIL
    by e-mail
    158,00 €
    plus VAT. and shipping


    9230-MIO-422
    Extension RS422-IO
    Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) Power consumption: 2W
    Quickbestellung INFOMAIL
    by e-mail
    158,00 €
    plus VAT. and shipping


    9230-AIO-V1.1
    Extension Analog-IO V1.1
    Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) Power consumption: 4W
    Quickbestellung INFOMAIL
    by e-mail
    149,00 €
    plus VAT. and shipping


    9230-RIO-230V
    Extension 230V Relay-IO
    Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A Power consumption: 2,5W
    Quickbestellung INFOMAIL
    by e-mail
    227,00 €
    plus VAT. and shipping


    9230-GG
    Bigger Case
    Width 90mm instead of 45mm
    Quickbestellung INFOMAIL
    by e-mail
    106,00 €
    plus VAT. and shipping


    9230-DIO
    Extension Digital-IO
    Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software Power consumption: 4W
    Quickbestellung INFOMAIL
    by e-mail
    191,00 €
    plus VAT. and shipping


    9230-USB
    Extension USB-port
    USB-port for EtherSens-devices (data storage) Extension for: - DB-backup/restoure-function - CSV-recording Maximum current: 200mA for 5V DC
    Quickbestellung INFOMAIL
    by e-mail
    105,00 €
    plus VAT. and shipping


    accessories:

    9636-TCPIP
    Patch-cable 3m, Cat5+, shielded
    RJ45 plug <=> RJ45 plug, 1:1
    9636-CROSS
    Cross-cable 3m Cat5+, shielded
    RJ45 plug <=> RJ45 plug, twisted pinning
    9636-TCPIP.1M
    Patch-cable 1m, Cat5e, shielded
    RJ45 plug <=> RJ45 plug, 1:1
    Quickbestellung INFOMAIL
    by e-mail
    15,00 €
    plus VAT. and shipping


    9240-SDÜ
    Option Safe S7-PLC-data-transmission
    Function extension for recognition of save data-transmission by toggle bit or counters in the S7-PLC. In case of a failure, a default configuration is mapped to the outputs.
    Quickbestellung INFOMAIL
    by e-mail
    99,00 €
    plus VAT. and shipping


    9230-SD-32
    Micro-SD-card 32GB
    for EtherSens-devices SDHC class 10
    Quickbestellung INFOMAIL
    by e-mail
    27,00 €
    plus VAT. and shipping


    9230-LTE-ANTW
    Stationary LTE-antenna for fixed mounting
    for EtherSens-devices LTE-modem cable length: 2m
    Quickbestellung INFOMAIL
    by e-mail
    163,00 €
    plus VAT. and shipping


    All prices plus costs of delivery, shipping insurance and VAT.
    All prices plus costs of delivery, shipping insurance and VAT.

    Automatic-mode

    Other downloads

    Extension

    Support-videos