TINA - mobile intelligent network-analyser
Simple Network-troubleshooting +++ Webserver operation/control +++ Networkanalysis 10/100 MBit without effort +++ To PC with 2,4 GHz +++ Detection network violations +++ Resolve IP-address conflicts +++ PROFINET monitori
OEM - Version (all accessories optional)
without PCMCIA-Slot for UMTS-/LAN-card
- Non-reactive recording of Ethernet communication
- Secure and passive decoupling of telegrams
- Monitors all OSI layers starting from layer 2 and packets of all sizes and types and VLAN traffic
more...
variants:
ARTNR: 9372-OEM
TELE-PROFessional II worldwide use
1260,00 € plus VAT. and shipping
ARTNR: 9372-OEM
TELE-PROFessional II worldwide use
EAN number: | 4260363240062 | |
HS-code: | 85389099 | |
Weight: | 2.05 kg |
Remote maintenance
TELE LINK NETWORK
|
||||||||
secured modem-protocol |
✓
|
✓
|
✓
|
|||||
additional software needed |
Siemens TS -Software
|
Siemens TS -Software
|
VPN-Client
|
VPN-Client
|
||||
Providing WinTELEPROF-software |
✓
|
✓
|
✓
|
|||||
modem |
analogue/ISDN
|
analogue
|
opt. via PCMCIA
|
analogue/GSM
|
analogue/ISDN/GSM
|
internet-connection
|
internet-connection
|
internet-connection
|
modem for world wide use |
✓
|
✓
|
✓
|
✓
|
✓
|
|||
interfaces | ||||||||
MPI/Profibus |
9600-12MBd
|
9600-12MBd
|
9600-12MBd
|
9600-12MBd
|
||||
RS232 |
2x
|
2x
|
2x
|
1x
|
1x
|
|||
TTY |
2x
|
2x
|
2x
|
1x
|
||||
PCMCIA |
2x (optionally)
|
1x
|
1x
|
|||||
Ethernet |
10/100BaseTx
|
1x
|
1x
|
5x
|
||||
USB |
2x
|
1x
|
||||||
LCD-display |
✓
|
✓
|
✓
|
✓
|
instead 10 LEDs
|
instead status-LED
|
instead webserver
|
instead webserver
|
supported PLC-protocols * | ||||||||
S7 |
✓
|
✓
|
✓
|
✓
|
✓
|
✓
|
||
S5 |
✓
|
✓ (optional)
|
✓ (optional)
|
✓
|
||||
Pilz PSS |
✓
|
✓ (optional)
|
✓ (optional)
|
|||||
Allen-Bradley |
✓
|
✓ (optional)
|
✓ (optional)
|
|||||
AEG |
✓ (optional)
|
✓ (optional)
|
||||||
Bosch |
✓ (optional)
|
✓ (optional)
|
||||||
Telemecanique |
✓ (optional)
|
✓ (optional)
|
||||||
GE-Fanuc |
✓ (optional)
|
✓ (optional)
|
||||||
Klöckner-Moeller |
✓ (optional)
|
✓ (optional)
|
||||||
Mitsubishi |
✓ (optional)
|
✓ (optional)
|
||||||
SMS-sending/Pager(S5/S7) |
✓
|
✓
|
✓
|
✓ (no pager)
|
only for analogue / ISDN
|
|||
HMI-messaging module(S5/S7) |
✓
|
✓
|
||||||
SMS-receive with GSM |
✓
|
|||||||
DTMF with analogue |
✓
|
|||||||
e-mail-dispatch |
✓
|
✓
|
✓
|
|||||
FAX-dispatch(S5/S7) |
✓
|
✓ (optional)
|
✓ (optional)
|
only for analogue / ISDN
|
||||
PLC-data coupling(S5/S7) |
✓
|
✓ (optional)
|
✓ (optional)
|
✓
|
✓
|
|||
ASCII-transfer from S5/S7 |
✓
|
✓ (optional)
|
✓ (optional)
|
only with ASCII-LAN
|
||||
internet-coupling |
✓
|
|||||||
Usage as dial-up-router |
✓
|
✓
|
||||||
power supply |
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
dimensions w x h x d (in mm) |
High: 67 x 280 x 170
FLAT: 300 x 175 x 70 |
300 x 175 x 66
|
235 x 162 x 37
|
90 x 162 x 54
|
40 x 125 x 115
|
42 x 15 x 65
|
65 x 43 x 17
|
154 x 92 x 28
|
* other PLC types on request |
Features:
Product Overview:
TINA is a handy device for analyzing network problems and network conflicts .
The device is plugged directly into the network cable without any further switches or peripherals.
With user rights and password protection, access via both LAN and WLAN is possible and well secured.
No PC with installed software is required for operation, the complete configuration and recording process takes place in the integrated web server.
Surveillance violations are reported directly by e-mail, special rules therefore can be specifically assigned.
Thanks to TINA, it´s now possible to find network problems and analyze network errors in a few minutes coupled with immediately bug fixing.
The network analysis includes functions such as IP conflicts, SUB-NET errors, runtime errors, missing subscribers due to subscriber failure and much more.
Application areas:
Configuration:
A configuration interface created for common systems eliminates the need for a long time in the system.
Most settings in the network area are quick and easy to set even for inexperienced users.
Thanks to free creatable rules and monitoring modes no unauthorized access and no unauthorized device escapes the attention.
The entire control and release monitoring must also be set directly in the web server like the rest of the configuration.
Recording and analysis directly in the web server, also for mobile devices:
Network analyzes and recordings can be started and operated directly in the web server.
Network packets are recorded and displayed in detail and divided into categories.
All settings are optimized for fast and easy operation.
Control surfaces extra large and simple, so the network analysis can also be performed with smartphones .
- Non-reactive recording of Ethernet communication
- Secure and passive decoupling of telegrams
- Monitors all OSI layers starting from layer 2 and packets of all sizes and types and VLAN traffic
- For 10 or 100Mbit/s
- To monitoring-PC with WIFI 2,4 GHz
- Complete operation (display and parameterization) via web server via WLAN.
- No extra recording devices and no cumbersome analysis software must be installed.
- Perfect for mobile devices.
- Immediate e-mail alerting for surveillance violations.
- Thanks to immediate alerting, with freely adjustable violations, not network error will be missed again.
- By using the timestamp exact identifying the point of the network error in the analysis will be no problem any more .
- Display of subscriber connections (which subscriber accesses which subscriber).
- M2M connections are now transparent! TINA shows exactly who communicates with whom at the IP level . Missing or incorrect network connections can be determined directly.
- Inconsistencies in accessing certain subnets ? We will show each connection directly with source and destination address incl. all data.
- Simple Exchange of IP addresses in order to be able to communicate with the device in another subnet (eg S7-LAN).
- For IP address conflicts TINA can intervene directly and change the "wrong" IP address directly.
- Regardless of whether devices are hanging in direct access or are removed, thanks to network protocol transmission , values ??for the corresponding device can be changed directly in the TINA web server.
- Read and write Wireshark files
- For later post-processing or for sharing with others, the recording format is 100% Wireshark compatible . This allows a later evaluation on each PC, detached from the recording hardware.
- Wireshark records can also be imported into the TINA interface for comparison or verification.
- Network tools like Ping, Traceroute, ... integrated
- Full function of all popular "fast" analysis functions as you know from the PC.
Product Overview:
TINA is a handy device for analyzing network problems and network conflicts .
The device is plugged directly into the network cable without any further switches or peripherals.
With user rights and password protection, access via both LAN and WLAN is possible and well secured.
No PC with installed software is required for operation, the complete configuration and recording process takes place in the integrated web server.
Surveillance violations are reported directly by e-mail, special rules therefore can be specifically assigned.
Thanks to TINA, it´s now possible to find network problems and analyze network errors in a few minutes coupled with immediately bug fixing.
The network analysis includes functions such as IP conflicts, SUB-NET errors, runtime errors, missing subscribers due to subscriber failure and much more.
Application areas:
- Exposure of burglary and unauthorized access to your company network.
- Help with commissioning, third-party machines can be analyzed and adjusted.
- Analysis of VoIP protocols and audio voice output in case of problems with your telephone system
- Detecting Address Conflicts
- Find and analyze network problems and fix them directly.
- Check LAN connections for your failure risk ( Re-transmission ...)
- Search, scan and exchange IP addresses and record their communication.
- monitoring of complete network segments.
Configuration:
A configuration interface created for common systems eliminates the need for a long time in the system.
Most settings in the network area are quick and easy to set even for inexperienced users.
Thanks to free creatable rules and monitoring modes no unauthorized access and no unauthorized device escapes the attention.
The entire control and release monitoring must also be set directly in the web server like the rest of the configuration.
Recording and analysis directly in the web server, also for mobile devices:
Network analyzes and recordings can be started and operated directly in the web server.
Network packets are recorded and displayed in detail and divided into categories.
All settings are optimized for fast and easy operation.
Control surfaces extra large and simple, so the network analysis can also be performed with smartphones .
Remote maintenance / telecontrol of PLC
Access to the connected PLC takes place by coupling via Analogue-, ISDN-, mixed Analogue-ISDN-, GSM-, UMTS-line and also via Internet with and without VPN-security.
Analogue and ISDN - how do they come together?
You have on the plant side only ISDN for telephone, but in your office there is only an analogue system? No problem, you have to install on the clients side the TP-II and activate there the analogue-emulation in the device. No, the modem signals will be send digitalized over ISDN and you can connect to it. So, you will be able to communicate though the telephone systems are different and your client isn´t forced to install an analogue connection.
Router - Mode (access to the network without router)
The Tele-Prof-II can also be used as a router for access from a PC via dial-up connection, so that a communication with the behind covered network results. Furthermore a network connection can be
made with the TP-II <=> TP-II-line, but in doing so the IP-address-root must differ.
User dependant network access
You have PLC/LAN-participants different supplier in your network and everybody should have access to this network? No problem, you give every supplier a VPN-username and passwort, define in the
destination device a user-dependent network-access and after positiv login he only can communicate to the released ip-addresses.
Separate your machine-net from the office-net
You need a separation between the machine-net and the office-net? No problem, plug a PCMCIA-LAN-card in your Tele-Prof-II-device (only for version -H) and the separation is OK. You have access to
both nets via remote maintenance.
S7-CP-alternate (without LAN-CP to the PLC)
Do you have a PLC without CP343-1 or CP443-1 and a TP-II as remote maintenance device? Then activate the CP-mode of the TP-II and your visualisation goes directly ONLINE via the LAN of the TP-II.
PLC coupling (data exchange between PLCs)
Your pumping stations report the water levels of the central control via telephone network. The central office itself can of course transmit commands/messages to the substations as well. Thereto no
dedicated line is required, a “normal” telephone connection is sufficient because the devices cut the line after occured message.
Failure report transmission without any change in the PLC programm
Your outstation reports the current value cyclically, or in case of malfunction the status via FAX, as SMS to your mobile phone, to your pager or also via e-mail. And this without an intervention
of the PLC-program. Here the variables and actions are stored and processed in the TP-II.
Failure report transmission released by the PLC
Your outstation reports the current value cyclically, or in case of malfunction the status via FAX, as SMS to your mobile phone, to your pager or also via e-mail.
Remote maintenance of centralized PLC-devices
You have many PLC and you want to programm them central on one place? No problem, you have to connect them all to the KOR/MUX-Tele-Switch, connect it with the TP-II and after telephone connect you
will be able with the PD-bus-selection of your Step5-software to go ONLINE. Of course the MOR/MUX-Tele-Switch is cascadable, so you can connect up to 30 PLCs to the devices.
Sending ASCII-data to a PC
Your car park or control sends the configuration / capacity utilisation to a PC with a modem, so that the data can be used for further processing.
Direct-mode "extended serial interface"
There is an unsupported control or data logger or converter integrated in your installation which protocol is not supported? No problem, the signs that the PC in the office sends will be
transferred via telephone line by the Direct-mode, and on-site reproduced by the TP-II. The way back is identical. So in that case there’s also a communication to the electronic devices
available.
Data logger with FTP-interface
You need a data logger which tape-records the specified data of the PLC and you can collect the data via FTP on demand. No problem, TP-II with the option Datalogger is the solution for you.
Supply voltage: | 24V DC +/- 20% |
Power consumption: | 15 watt |
Display: |
expressive LCD display 5 status LEDs |
Handling/Configuration: |
integrated keypad WEB-Browser |
Interfaces: |
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBdTTY/20mA current loop (AG-TELE aktiv, PLC passiv) RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
10/100BaseTX RJ45-ethernet jackTTY/20mA current loop (100 % mechanically and electr. compatible) RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
2xUSB, 2xPCMCIA (only for version -H) |
Integrated modem: |
33K6 HIGH-SPEED, V.42/BIS MNP5 analogue modem ISDN (Euro ISDN + 1TR6) |
Operating temperature: | 0 - 55°C |
Case: | powder coated metal case with mounting flange and DIN-rail mounting |
Dimensions: |
Flat 300 x 175 x 70 mm Hoch 67 x 280 x 170 mm |
Scope of delivery: |
Tele-Prof-II Power connector 3pins big |
All prices plus costs of delivery, shipping insurance and VAT.
accessories:
11,00 €
plus VAT. and shipping
plus VAT. and shipping
28,00 €
plus VAT. and shipping
plus VAT. and shipping
9361-3
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
9361-3.05M
S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.06M
S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.10M
S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
11,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
11,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
244,00 €
plus VAT. and shipping
plus VAT. and shipping
22,00 €
plus VAT. and shipping
plus VAT. and shipping
63,00 €
plus VAT. and shipping
plus VAT. and shipping
172,00 €
plus VAT. and shipping
plus VAT. and shipping
4,00 €
plus VAT. and shipping
plus VAT. and shipping
105,00 €
plus VAT. and shipping
plus VAT. and shipping
199,00 €
plus VAT. and shipping
plus VAT. and shipping
11,00 €
plus VAT. and shipping
plus VAT. and shipping
27,00 €
plus VAT. and shipping
plus VAT. and shipping
59,00 €
plus VAT. and shipping
plus VAT. and shipping
9636-CROSS
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
Cross-cable 3m Cat5+, shielded
RJ45 plug <=> RJ45 plug, twisted pinning
9636-TCPIP
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
Patch-cable 3m, Cat5+, shielded
RJ45 plug <=> RJ45 plug, 1:1
All prices plus costs of delivery, shipping insurance and VAT.
9372-OEM
TELE-PROFessional II worldwide use
OEM - Version (all accessories optional) without PCMCIA-Slot for UMTS-/LAN-card
TELE-PROFessional II worldwide use
OEM - Version (all accessories optional) without PCMCIA-Slot for UMTS-/LAN-card
1260,00 €
plus VAT. and shipping
plus VAT. and shipping
9372-FLAT
TELE-PROFessional II worldwide use
flat version / OEM - Version (all accessories optional) without PCMCIA-slot for UMTS-/LAN-card
TELE-PROFessional II worldwide use
flat version / OEM - Version (all accessories optional) without PCMCIA-slot for UMTS-/LAN-card
1260,00 €
plus VAT. and shipping
plus VAT. and shipping
9372-FLAT-H
TELE-PROFessional II worldwide use
flat version / OEM - Version (all accessories optional) with PCMCIA-slot for UMTS-/LAN-Card
TELE-PROFessional II worldwide use
flat version / OEM - Version (all accessories optional) with PCMCIA-slot for UMTS-/LAN-Card
1313,00 €
plus VAT. and shipping
plus VAT. and shipping
Analogue-telefone
TELE-PROFessional (TP)
Facilities management world wide – remote maintenance and diagnosis via telephone
Facilities management world wide – remote maintenance and diagnosis via telephone
TELE-BOOK (TB)
PLC-remote maintenance also available from the car, with 12V power supply
PLC-remote maintenance also available from the car, with 12V power supply
TeleRouter
The simple and quick router solution for automation
The simple and quick router solution for automation
Analogue-telefone
TELE-PROFessional (TP)
Facilities management world wide – remote maintenance and diagnosis via telephone
Facilities management world wide – remote maintenance and diagnosis via telephone
TELE-BOOK (TB)
PLC-remote maintenance also available from the car, with 12V power supply
PLC-remote maintenance also available from the car, with 12V power supply
MPI / PPI - Profibusmodem
Programming of S7-PLC’s via telephone from afar
Programming of S7-PLC’s via telephone from afar
TeleRouter
The simple and quick router solution for automation
The simple and quick router solution for automation
ISDN
TeleRouter
The simple and quick router solution for automation
The simple and quick router solution for automation
ISDN
TeleRouter
The simple and quick router solution for automation
The simple and quick router solution for automation
TELEService analogue
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
TELEService isdn
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
All prices plus costs of delivery, shipping insurance and VAT.
11,00 €
plus VAT. and shipping
plus VAT. and shipping
9352-LANCON
S7-LAN connector for Siemens S7 PLC controller
Network-connection for the S7-200/300/400-PLC +++ S7-adapter PPI/MPI/PROFIBUS +++ Of developer and manufacturer +++ Smallest Ethernet-gateway S7 +++ Network for each S7-PLC +++ Fast commissioning +++ Replacement for CP343-1/443-1
S7-LAN connector for Siemens S7 PLC controller
Network-connection for the S7-200/300/400-PLC +++ S7-adapter PPI/MPI/PROFIBUS +++ Of developer and manufacturer +++ Smallest Ethernet-gateway S7 +++ Network for each S7-PLC +++ Fast commissioning +++ Replacement for CP343-1/443-1
423,00 €
plus VAT. and shipping
plus VAT. and shipping
9359-LAN
S5-LAN++
Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
S5-LAN++
Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
452,00 €
plus VAT. and shipping
plus VAT. and shipping
11,00 €
plus VAT. and shipping
plus VAT. and shipping
174,00 €
plus VAT. and shipping
plus VAT. and shipping
145,00 €
plus VAT. and shipping
plus VAT. and shipping