TINA - mobile intelligent network-analyser

ALF-Devices

	ALF	ALF-UA	ALF-UA-TISCH
Assembly / housing	Tabletop unit	DIN-rail assembly	Tabletop unit
Search for access. nodes Simatic-Manager/TIA	---	Yes	Yes
Support WPS registration	Yes	---	---
Easy configuration	---	Yes	Yes
Restart mandatory between config changes	Yes	No, just switch	No, just switch
Language of the web interface	only GB	D / GB switchable	D / GB switchable
Access-Point/Client at the same time	---	Yes	Yes
WAN-port can be used in AP-bridge-mode	---	Yes	Yes
WAN-port can be used in client-bridge-mode	---	Yes	Yes
USB port for future expansion	---	Yes	Yes
Passive POE (12V)	Yes	---	---

ALF-Devices

	ALF	ALF-UA	ALF-UA-TISCH
Assembly / housing	Tabletop unit	DIN-rail assembly	Tabletop unit
Search for access. nodes Simatic-Manager/TIA	---	Yes	Yes
Support WPS registration	Yes	---	---
Easy configuration	---	Yes	Yes
Restart mandatory between config changes	Yes	No, just switch	No, just switch
Language of the web interface	only GB	D / GB switchable	D / GB switchable
Access-Point/Client at the same time	---	Yes	Yes
WAN-port can be used in AP-bridge-mode	---	Yes	Yes
WAN-port can be used in client-bridge-mode	---	Yes	Yes
USB port for future expansion	---	Yes	Yes
Passive POE (12V)	Yes	---	---

Operating-modes of the ALF-device and their function:

Operating-mode	ALF	ALF-UA
AP-Router	Build a WiFi-network LAN-port and WiFi are in the same subnet ⇒ all together communicating devices must be in the same subnet The WAN-port must be another subnet, it will be routed here	Build a WiFi-network LAN-port and WiFi are in the same subnet ⇒ all together communicating devices must be in the same subnet The WAN-port must be another subnet, it will be routed here
AP-Bridge	Build a WiFi-network LAN-port and WiFi are in the same subnet ⇒ all together communicating devices must be in the same subnet The WAN-port is without function	Build a WiFi-network LAN-port, WAN-port and WiFi are in the same subnet ⇒ all together communicating devices must be in the same subnet
Client-Router	Connects to existing WiFi-network LAN-port and WiFi must be in the same SubNet ⇒ all together communicating devices must be in the same subnet The WAN-port must be another subnet, it will be routed here	Connects to existing WiFi-network LAN-port and WiFi must be in the same SubNet ⇒ all together communicating devices must be in the same subnet The WAN-port must be another subnet, it will be routed here
Client-Bridge	Connects to existing WiFi-network LAN-port and WiFi must be in the same SubNet ⇒ all together communicating devices must be in the same subnet The WAN-port is without function	Connects to existing WiFi-network LAN-port, WAN-port and WiFi must be in the same SubNet ⇒ all together communicating devices must be in the same subnet

S7

	MPI/PPI	MPI - II	MPI - USB	MPI - LAN	S7 - USB	S7 - LAN	S7 - BRIDGE	S7 - GATE	S7 - LAN++
PPI-Bus
PPI 9.6 KBit/s - 19.2 KBit/s	x	x	x	x	x	x	x	x	x
Multimaster 9.6 KBit/s - 187.5 KBit/s		x	x	x	x	x	x	x	x
MPI-Bus
19.2 KBit/s	x	x	x	x	x	x	x	x	x
187.5 KBit/s	x	x	x	x	x	x	x	x	x
1.5 MBit/s		x	x	x	x	x	x	x	x
Profibus
9.6 KBit/s		x	x	x	x	x	x	x	x
19.2 KBit/s	x	x	x	x	x	x	x	x	x
45.45 KBit/s		x	x	x	x	x	x	x	x
93.75 KBit/s		x	x	x	x	x	x	x	x
187.5 KBit/s	x	x	x	x	x	x	x	x	x
500 KBit/s		x	x	x	x	x	x	x	x
1.5 MBit/s		x	x	x	x	x	x	x	x
3.0 MBit/s		x	x	x	x	x	x	x	x
6.0 MBit/s		x	x	x	x	x	x	x	x
12.0 MBit/s		x	x	x	x	x	x	x	x
Profibus-profile
DP	x(12)	x	x	x	x	x	x	x	x
standard	x(12)	x	x	x	x	x	x	x	x
universal(DP/FMS)		x	x	x	x	x	x	x	x
RS 232
9.6 KBit/s	x(19)	x(19)
19.2 KBit/s	x	x
38.4 KBit/s	x	x
57.6 KBit/s	x(9)	x(9)
115.2 KBit/s	x(9)	x(9)
USB
USB 1.1 (6)		x(1)	x		x(2)
LAN
10/100BaseTx				x(7)		x	x	x	x
WIFI
2.4 GHz							x
TeleService operation
with S7-300/400	x(14)(18)	x(14)(18)
baud rates at TS-operation directly at the PC
9.6 KBit/s	x	x
19.2 KBit/s	x	x
38.4 KBit/s	x(8)	x(8)
57.6 KBit/s	x(8)	x(8)
baud rates at TS-operation directly with a modem
9.6 KBit/s	x	x
19.2 KBit/s	x	x
38.4 KBit/s	x	x
57.6 KBit/s	x	x
115.2 KBit/s	x	x
HMI
9.6 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
19.2 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
38.4 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
57.6 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
115.2 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
update
firmware-update	x(10)	x(10)	x(15)	x(15)	x(15)	x(15)	x(15)	x(15)	x(15)
input/online help
keypad		x	x	x		x(21)	x(21)	x(21)	x(21)
display	x	x	x	x		x(21)	x(21)	x(21)	x(21)
PD connections (maximum)
PLCVCOM		1	1	1	1	1	1	1	1
RFC1006				8		8	32	32	32
AG connections (maximum)
passive subscriber	1	15	15	15	15	15	15	15	15
active subscriber	126	126	126	126	126	126	126	126	126
more functions
integrated PLC-firewall							x	x	x
display diagnostic-buffer in the webbrowser							x	x	x
webserver for configuration				x		x	x	x	x
Remote access over existing VPN-channel				x		x	x	x	x
Access via existing WLAN-channel				x		x	x	x	x
status/control variable				x		x	x	x	x
S7 on S7/S5 DB exchange				x		x	x	x	x
S5 on MPI DB exchange		only as S5toMPI
S7 on MPI (Send/Fetch)				x		x	x	x	x
Profinet Gateway				x		x	x	x	x
Time in PLC from NTP-server				x		x	x	x	x
galvanic separation
to the bus (screen connected through)	1KV	1KV	1KV	1,5KV	1KV	1,5KV	1,5KV	1,5KV	1,5KV
mounting
wall monuting (with opt. wall mounting-set)	x	x	x	x
upgrading with
CheapConn+cable	x	x	x	x
supports
WIN 98	x	x(3)		x		x	x	x	x
WIN 98 SE	x	x	x	x	x	x	x	x	x
WIN ME	x	x	x	x	x	x	x	x	x
WIN NT	x	x(5)	x(5)	x	x(5)
WIN 2000	x	x	x	x	x	x	x	x	x
WIN XP Home (4)	x	x	x	x	x	x	x	x	x
WIN XP Professional	x	x	x	x	x	x	x	x	x
Vista(32bit)	x	x	x	x	x	x	x	x	x
Win7(32bit)	x	x	x	x	x	x	x	x	x
Win7(64bit)	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win8/8.1	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win10	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win11	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
(1) just with USB-cable plug <-> plug, type A <-> A, item number: 9352.1 (2) just with USB-cable plug <-> plug, type A <-> mini B, item number: 9352.3 (3) only serial communication (4) Siemens Step7 V5.2 and higher dont run with this operationing system (5) USB-communication is only possible with the special driver for Win NT (6) USB 2.0 is backward compatible to 1.1 (7) Cable is designed for direct connection to PC network card socket. It can also be a hub / switch with uplink port or operated at a hub / switch with automatic detection of assignement and adaptation (8) only in combination with the MPI-Speed-driver („continously-active“) (9) Siemens Step7 supports these baud rates only with the MPI-Speed-Utility (10) Update directly with PC or via Tele-Network if the cable is connected to a device of the Tele-Network-family (Tele-Link, Tele-Book or Tele-Professional) (11) only in the mode: MultiMaster-Mode (12) up to a maximum baud rate of 187.5 KBit/s (13) In this transmission, the baud rate is irrelevant, because it communicates via a virtual COM-port. (14) with the use of the TS-adapter / item number: 9350.TS (15) Update directly with PC and TIC-driver (18) Operation requires Step 7 with additional software Tele-Service (TS) from Siemens (19) only at PPI-communication possible (20) Only with TIC-driver (21) with integrated webserver possible (22) No support of Siemens Step7-software possible (23) Only with USB and with TIC-driver

S5

	PG-UNI / PG-UNI-II	S5-LAN++	S5-BRIDGE	PG-USB	PG-COM	PG-ISO-SET
device type
S5-90U	x	+ext. 24V	+ext. 24V	x	x	x
S5-95U	x	+ext. 24V	+ext. 24V	x	x	x
S5-100U	x	+ext. 24V(3)	+ext. 24V	x	x	x
S5-115U	at 944 + 9359-8	at 944 + 9359-8 + ext. 24V (4)	x	x	x	x
S5-135U	at 928B + 9359-8	at 928B + 9359-8 +ext. 24V (6)	x	x	x	x
S5-155U	x	x	x	x	x	x
S5-AG110S	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG130W/B	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG150A/K/S/U	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
CP-143	x			x		x
CP-521	+CP521 adapter					+CP521 adapter(1)
CP-523	+CP523 adapter					+CP523 adapter(1)
CP-525	+9359-5			+9359-5-USB		+9359-5(1)
CP-526	x			x		x
CP-527	x			x		x
CP-528	x			x		x
CP-544	x (7)			x (7)		x (7)
CP-5430	x			x		x
CP-5431	x
IP-246	x			x		x
IP-247	x			x		x
IP-252	x			x		x
IP-266	+9359-4			x		+9359-4(1)
WF-470	+9359-4 + 9359-5-WF470			+9359-5-WF470-USB		+9359-5-WF470 + 9359-4(1)
SIN-805	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-820	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-840	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-850	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-880	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
Connection on PC	RS232-port	Ethernet RJ45	Ethernet RJ45 / WLAN/WIFI	USB-port type A	RS232-port	RS232-port
max. prolongation:	300m (UNI-extension)	300m (S5-LAN-extension) +ext. 24V	100m (PG-USB-extension)		300m (UNI-extension)
(1) ISO adapter can not be used because the required supply voltage on the PG interface of the module is not present. (2) At the CPU 6ES5 102-8MA02 Release 3 is a PG-ISO-Adapter or Netz-Adapter additional required. (3) With S5-LAN++ from HW V2.3 [2010] the "Netz-Adapter" is no more needed, this version has included current-sources. (4) With S5-LAN++ from HW V2.3 [2010] no accessories are needed, this version has included current-sources. (5) With S5-LAN++ from HW V2.3 [2010] the Sinum-Adapter 9359-6-USB is needed. (6) Only for CPU928B with PG-ISO-Adapter and ext. 24V DC, unless there is an S5-LAN++ from HW V2.3 [2010] used. (7) CP544 has bolts at the programming-interface. The products do not fit 100% on this interface. (8) With S5-BRIDGE the Sinum-Adapter 9359-6-USB is needed.

Remote maintenance

	TELE LINK NETWORK
	TELE-PROF-II	TELE-PROF	TELE-BOOK	MPI-Modem	TELEService	S5-LAN	S7-LAN	TeleRouter
secured modem-protocol	✓	✓	✓
additional software needed				Siemens TS -Software	Siemens TS -Software	VPN-Client	VPN-Client
Providing WinTELEPROF-software	✓	✓	✓
modem	analogue/ISDN	analogue	opt. via PCMCIA	analogue/GSM	analogue/ISDN/GSM	internet-connection	internet-connection	internet-connection
modem for world wide use	✓	✓	✓	✓	✓
interfaces
MPI/Profibus	9600-12MBd			9600-12MBd	9600-12MBd		9600-12MBd
RS232	2x	2x	2x	1x	1x
TTY	2x	2x	2x			1x
PCMCIA	2x (optionally)	1x	1x
Ethernet	10/100BaseTx					1x	1x	5x
USB	2x				1x
LCD-display	✓	✓	✓	✓	instead 10 LEDs	instead status-LED	instead webserver	instead webserver
supported PLC-protocols *
S7	✓	✓	✓	✓	✓		✓
S5	✓	✓ (optional)	✓ (optional)			✓
Pilz PSS	✓	✓ (optional)	✓ (optional)
Allen-Bradley	✓	✓ (optional)	✓ (optional)
AEG		✓ (optional)	✓ (optional)
Bosch		✓ (optional)	✓ (optional)
Telemecanique		✓ (optional)	✓ (optional)
GE-Fanuc		✓ (optional)	✓ (optional)
Klöckner-Moeller		✓ (optional)	✓ (optional)
Mitsubishi		✓ (optional)	✓ (optional)
SMS-sending/Pager(S5/S7)	✓	✓	✓		✓ (no pager)			only for analogue / ISDN
HMI-messaging module(S5/S7)	✓							✓
SMS-receive with GSM					✓
DTMF with analogue					✓
e-mail-dispatch	✓				✓			✓
FAX-dispatch(S5/S7)	✓	✓ (optional)	✓ (optional)					only for analogue / ISDN
PLC-data coupling(S5/S7)	✓	✓ (optional)	✓ (optional)			✓	✓
ASCII-transfer from S5/S7	✓	✓ (optional)	✓ (optional)			only with ASCII-LAN
internet-coupling	✓
Usage as dial-up-router	✓							✓
power supply	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC
dimensions w x h x d (in mm)	High: 67 x 280 x 170 FLAT: 300 x 175 x 70	300 x 175 x 66	235 x 162 x 37	90 x 162 x 54	40 x 125 x 115	42 x 15 x 65	65 x 43 x 17	154 x 92 x 28
* other PLC types on request

Features:

• Non-reactive recording of Ethernet communication

• Secure and passive decoupling of telegrams

• Monitors all OSI layers starting from layer 2 and packets of all sizes and types and VLAN traffic

• For 10 or 100Mbit/s

• To monitoring-PC with WIFI 2,4 GHz

• Complete operation (display and parameterization) via web server via WLAN.
• No extra recording devices and no cumbersome analysis software must be installed.
• Perfect for mobile devices.

• Immediate e-mail alerting for surveillance violations.
• Thanks to immediate alerting, with freely adjustable violations, not network error will be missed again.
• By using the timestamp exact identifying the point of the network error in the analysis will be no problem any more .

• Display of subscriber connections (which subscriber accesses which subscriber).
• M2M connections are now transparent! TINA shows exactly who communicates with whom at the IP level . Missing or incorrect network connections can be determined directly.
• Inconsistencies in accessing certain subnets ? We will show each connection directly with source and destination address incl. all data.

• Simple Exchange of IP addresses in order to be able to communicate with the device in another subnet (eg S7-LAN).
• For IP address conflicts TINA can intervene directly and change the "wrong" IP address directly.
• Regardless of whether devices are hanging in direct access or are removed, thanks to network protocol transmission , values ??for the corresponding device can be changed directly in the TINA web server.

• Read and write Wireshark files
• For later post-processing or for sharing with others, the recording format is 100% Wireshark compatible . This allows a later evaluation on each PC, detached from the recording hardware.
• Wireshark records can also be imported into the TINA interface for comparison or verification.

• Network tools like Ping, Traceroute, ... integrated
• Full function of all popular "fast" analysis functions as you know from the PC.

Product Overview:
TINA is a handy device for analyzing network problems and network conflicts .
The device is plugged directly into the network cable without any further switches or peripherals.
With user rights and password protection, access via both LAN and WLAN is possible and well secured.
No PC with installed software is required for operation, the complete configuration and recording process takes place in the integrated web server.
Surveillance violations are reported directly by e-mail, special rules therefore can be specifically assigned.

Thanks to TINA, it´s now possible to find network problems and analyze network errors in a few minutes coupled with immediately bug fixing.
The network analysis includes functions such as IP conflicts, SUB-NET errors, runtime errors, missing subscribers due to subscriber failure and much more.



Application areas:

• Exposure of burglary and unauthorized access to your company network.
• Help with commissioning, third-party machines can be analyzed and adjusted.
• Analysis of VoIP protocols and audio voice output in case of problems with your telephone system
• Detecting Address Conflicts
• Find and analyze network problems and fix them directly.
• Check LAN connections for your failure risk ( Re-transmission ...)
• Search, scan and exchange IP addresses and record their communication.
• monitoring of complete network segments.

Configuration:
A configuration interface created for common systems eliminates the need for a long time in the system.
Most settings in the network area are quick and easy to set even for inexperienced users.




Thanks to free creatable rules and monitoring modes no unauthorized access and no unauthorized device escapes the attention.
The entire control and release monitoring must also be set directly in the web server like the rest of the configuration.



Recording and analysis directly in the web server, also for mobile devices:
Network analyzes and recordings can be started and operated directly in the web server.



Network packets are recorded and displayed in detail and divided into categories.



All settings are optimized for fast and easy operation.
Control surfaces extra large and simple, so the network analysis can also be performed with smartphones .

Supply voltage:	24V DC +/- 20%
Power consumption:	1,2 watt
Display:	status-LEDs
Handling/Configuration:	with integrated webserver
Interfaces:	to antenna: RP-SMA-female connector (reverse polarity) with 5 dBi (Power out: 20 dB) to the PLC: 10/100BaseTX RJ45-ethernetplug to the PD/PC: WLAN connection (802.11 b/g/n)
Security	WEP 64/128bit WPA (TKIP with IEEE 802.1x) WPA2 (AES with IEEE 802.1x) WPA Mixed
Operating temperature:	0 - 55°C
Case:	plastic clamping-case
Dimensions:	114 x 100 x 22.3 mm
Scope of delivery:	ALF-UA WIFI-stub-antenna

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

Internet-coupling/communication

CONNECT devices
Remotesupport without configuration / Machine access without IT

S7-LAN
smallest simatic S7 ethernet gateway with PD-socket, multifunctional, 1 adapter for all PPI, MPI and Profibus applications
with ext. 24V-connector
easy remote maintenance over internet

S5-LAN++
Network-connection for the S5-PLC +++ Network to PG-interface +++ Of developer and manufacturer +++ Remotemaintenance via Internet +++ S5 (CP-343-1 compatible)

TeleRouter
The simple and quick router solution for automation

ALF-Devices

ALF-UA table version
Industrial WLAN-Router +++ High-speed datarate 150 Mbit/s +++ Integrated firewall +++ Din-rail-mounting +++ Make your own WIFI

ALF
Industrial WLAN-Router
High-speed datarate up to 150Mbit/s
Integrated firewall

All prices plus costs of delivery, shipping insurance and VAT.