Cookies helfen uns bei der Bereitstellung unserer Dienste. Durch die Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies setzen.
Cookies help us in providing our services. By using our services, you agree that we set cookies.
OK
S5-LAN++ RS232-version - Process Informatik Entwicklungsgesellschaft mbH

S5-LAN++ RS232-version


Industrial Ethernet - TCP/IP for all SIMATIC-S5 via the programming-interface

Industrial Ethernet <=> S5 PD-interface
(RS232), inclusive adapter cable
(15pin female <=> 9pin male)

The upgrade for every SIMATIC S5-PLC without changes to the hardware- and software-configuration to S7-300 with CP343-1.
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET-function.
By plugging the module onto the PG-interface of an S5-PLC, this connection becomes a universally usable connection, a "multi-connection". Multiple and parallel communications at the same time, such as WinCC, PUT/GET from S7-PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step5 or PG2000.

Advantages:
  • Simple and fast networking
  • Multiplexer for all protocols
  • Integration as S7-300 (CP 343-1)

more...
variants:

509,- € plus VAT. and shipping

ARTNR: 9359-LAN-RS
S5-LAN++ RS232-version
EAN number: 4260363243599
HS-code: 85444290


The upgrade for every SIMATIC S5-PLC without changes to the hardware- and software-configuration to S7-300 with CP343-1.
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET-function.
By plugging the module onto the PG-interface of an S5-PLC, this connection becomes a universally usable connection, a "multi-connection". Multiple and parallel communications at the same time, such as WinCC, PUT/GET from S7-PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step5 or PG2000.

Advantages:
  • Simple and fast networking
  • Multiplexer for all protocols
  • Integration as S7-300 (CP 343-1)
  • Access to S5-data via S7-TCP/IP with PUT/GET
  • Qualified support
  • Comprehensive documentation
Anschlussmöglichkeiten:
  • S5-LAN++ direkt auf PG-Schnittstelle der S5
  • S5-LAN++ über Multiplexer PG-MUX-II auf PG-Schnittstelle der S5
  • S5-LAN++-Derivat für 3964R über Adapterkabel an CP524/525
  • an PC direkt verbunden mit Patch-Kabel
  • an PC direkt verbunden mit Cross-Kabel
  • an PC über Hub/Switch
Features:
  • fastest installation to the network of every SIMATIC - S5
  • no complicated installation, simply plug on 15pin PD-interface and communicate
  • no change in the software in the PLC
  • SIMATIC S5 protocols
    AS511, RK 512, SINEC-H1 and ISO-on-TCP (RFC 1006)
  • supported Controls
    S5-90U, S5-95U, S5-100U, S5-115U, S5-135U, S5-150U (via intermediate adapter), S5-155U, Sinumerik 810/880 (via intermediate adapter) and COMCON 110 from Berthel
  • supported data areas
    inputs, outputs, flags (also S5 s-flag), datea blocks (also S5 dx-block), timer and counter
  • easiest configuration with Windows tool (S5 LAN manager)
  • at the same time two PG-, four OP/Visualization- and two RFC1006-channel (ISO on TCP)
  • speak to S5 as a S7
  • integrated multiplexer, parallel use of all protocols
    Programming and visualizing simultaneously without any special configuration
  • external 24V supply optional, otherwise automatically directly from S5-PG socket (from S5-115U)
  • supported platforms
    S7-TCPIP RFC1006-communication platform independent, otherwise configuration tools/virtual com port for Windows (any) 32/64bit
  • Timely communication with the S5-PLC through integrated firmware
  • PUT/GET via S7-TCP/IP-access to S5-data (I/O/M/DB/DX/Z/T/S-flags)
  • S7-S5-coupling with PUT/GET S7-300/400/1200/1500
  • Coupling with WinCC, OPC-server and S7-TCP/IP-software-driver such as IP-S7-LINK (S7 compatible)
  • S5 TCP/IP Layer 4
  • Access from applications/devices via FETCH/WRITE-protocol to the connected S5-PLC
  • S5-LAN-Link (open protocol)
  • Compatible with S5-VIPA-TCP/IP
  • RFC-1006 connection => pure ISOonTCP (handling blocks scope of delivery)
  • RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported
  • with WinCC Flexible / TIA (e.g. MP377, TP177B) via S7-TCP/IP to the Simatic S5 (CP-343-1 compatible)
  • data exchange between S5 - S5 and S5 - S7 via TCP/IP
  • ideal for process visualization
  • programming with STEP 5 via Ethernet
  • DHCP / Auto-IP supported
  • variants: 3964R-LAN, ASCII-LAN, PG-LAN, as RS232-version and for the MUX757
  • driver-DLL for Windows available, EXCEL and WORD can read/write S5-data
  • including a free Classic OPC-DA-server license "OPC-Manager lite" [limited to 100 items]
  • examples and demo-version of communication driver as download available

Applications:

  • Connection to SCADA / data-acquisition systems
  • Data exchange with S7-PLC (300/400/1200/1500)
  • S7-panel as replacement for defective, no more deliverable S5-panel
  • remote programming (also via the Internet))
  • control central all controls in the plant

Supported S5 protocols / connection-paths:

  • AS511 via virtual COM-port PLCVCom
  • S7-TCP/IP with PUT/GET-function
  • ISO-on-TCP (RFC 1006)
  • TCP/IP with H1/ISO-on-TCP
  • TCP/IP with RK 512 (3964 and 3864R)

Addressing of the S5-data via S7-TCP-protocol:
The implementation of the data in S5 is largely identical to the S7 and works completely autonomously. F/I/O/T/C are addressed read/write identically. Even a necessary conversion of the data-types such as S5-float (in KG-format) to S7-float (according to IEEE-754) takes place automatically in both directions. The address must be converted for DB/DX and S-flags.
For the data blocks, this is usually a factor of 2. You can find examples for DL and DR in the data word in the table:

Simatic S5Simatic S7Format
FB11FB11BYTE
FW20FW20WORD
DB10 DW 9DB10.DBW18WORD
DB10 DW60DB10.DBW120WORD
DB10 DL3DB10.DBB6BYTE
DB10 DR3DB10.DBB7WORD
DB10 DD 25DB10.DBD50DWORD
DB10 DD 35DB10.DBD70Real

Addressing S5 DX-Blocks with S7-TCP/IP
DX Block nrmapped to S7-DB nr
DX 1DB 257
DX 2DB 258
DX 100DB 356

Addressiing S5 S-Flag over S7 TCP/IP
Since the S7 does not recognize the S-flags, the S-flags are mapped as data block DB 1000. That means reading and writing on DB 1000 means reading and writing the S-flags
The following applies in the table: x = S-flag number, y = bit number
S-Flagmapped to S7-DB nr
S x.yDB1000.DBX x.y
SY xDB1000.DBB x
SW xDB1000.DBW x
SD xDB1000.DBD x

S5 goes INDUSTRIE 4.0 (only in german) (Mouse click for enlargement)



Visualisation via 3964R-interface without using the protocol itself
Produkbild
Your visualisation-software does not support a 3964R-protocol, but you have to apply this package? No problem, connect the 3964R-LAN to your CP and activate the RFC1006-emulation in the module. Now your software gets the data from the module via RFC1006, which in turn communicates with the assembly via 3964R.
Extension of a 3964R-line via LAN
Produkbild
There is a control with CP524 in your outstation and the communication partner of the CP has moved locally. Connecting path is a LAN-network. So each of both participants gets a 3964R-LAN and after input of the partner’s IP-address a coupling via LAN will be configured.
PLC coupling (data exchange between PLC’s)
Produkbild
Your pumping stations report the water levels of the central control via telephone network. The central office itself can of course transmit commands/messages to the substations as well. Therefore no dedicated line is required, it’s sufficient when the stations connect via network (DSL-router).

Produkbild

With the S5-H1-PG-LAN you would be able to use the H1-path-selection over the S5-LAN++ and communicate with all PLCs in the H1-bus. You don´t have to connect serial to the CP, you can do this easy over your network.

Remote maintenance of your S5-PLC via LAN / Internet
Produkbild
You have access to a on-site network and your PLC has no LAN-connection? No problem, plug the S5-LAN on the PLC and you will have immediate access to the PLC from afar.
Programming of S5-PLC’s via LAN
Produkbild
You would like to respond to your S5-PLC via LAN, but not integrate an Ethernet-CP? No problem, plug the S5-LAN++ on the PD-interface and access via LAN.
Communication with Win98 – XP/Vista/7/8/10/11 via network to S5-PLC
Produkbild
You still have a PC with Win98 and a MS-DOS-based Step5-package and would like to go Online on your S5-PLC via LAN? No problem, the provided virtual Com-Port PLCVCom emulates a COM-port on your PC with which you go Online. Even your MS-DOS-based Step5-software on this WIN98-PC can use this virtual Com-Port. With a patchtool for the Siemens Step5-software, which is provided as well, nothing else stands in your way to communicate via LAN.
Watching of S5- PLC’s with panel for S7-PLC
Produkbild
Your panel only has a LAN-socket as PLC-interface and supports only S7-RFC1006, no problem. Connect this socket with the S5-LAN++ and plug it directly on the PD-interface of the PLC. The S5-LAN++ performs adverse your panel as a S7-PLC although you receive the data from the S5-PLC. Then access to the variables and data of the S5-PLC is already available.
Watching of S5-PLC’s via LAN without Ethernet-CP
Produkbild
Your panel only has a LAN-socket as PLC-interface, no problem. Connect this socket with the S5-LAN++ and plug it directly on the PD-interface of the PLC. Then access to the variables and data of the PLC is already available.
Supply voltage: 24V DC +/- 20%
Power consumption: 2 watt
Display: status-LED
Handling/Configuration: reset-switch-key (factory setting)
S5-LAN Manager
Interfaces:
to the PLC:
RS232 TxD, RxD and GND
to the PD/PC:
10/100BaseTX RJ45-ethernet jack
Operating temperature: 0 - 55°C
Case: ABS-plastic case
Dimensions: 42 x 15 x 65 mm
Scope of delivery:
S5-LAN++-module
Power connector 2pins small
All prices plus costs of delivery, shipping insurance and VAT.

accessories:

9359-LAN-UGR
Device upgrade S5-LAN to S5-LAN++

Hardware-update and firmware-upgrade from S5-LAN to S5-LAN++ Including checking the module
Quickbestellung INFOMAIL
by e-mail
99,- €
plus VAT. and shipping

9352-24
Power connector 2pins small

cable coupling by screw-connector (small)
Quickbestellung INFOMAIL
by e-mail
4,- €
plus VAT. and shipping

All prices plus costs of delivery, shipping insurance and VAT.

Variationen:

9359-LAN
S5-LAN++

Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
Quickbestellung INFOMAIL
by e-mail
414,- €
plus VAT. and shipping

9359-PG-LAN
S5-PG-LAN

RS232-complement to S5-LAN++ (TTY/RS232)
Quickbestellung INFOMAIL
by e-mail
847,- €
plus VAT. and shipping

9359-RK-RS
S5-3964R-LAN RS232-version

Communication with 3964/9364R-client with S7-TCPIP inclusive adapter cable (15pin female <=> 9pin male)
Quickbestellung INFOMAIL
by e-mail
890,- €
plus VAT. and shipping

9359-RK
S5-3964R-LAN

Communication with 3964/9364R-client with S7-TCPIP Cable-adapter optional
Quickbestellung INFOMAIL
by e-mail
794,- €
plus VAT. and shipping

9359-ASCII
S5-ASCII-LAN

sends ASCII-data via Industrial Ethernet
Quickbestellung INFOMAIL
by e-mail
520,- €
plus VAT. and shipping

9359-H1-PG-LAN
S5-H1-PG-LAN

Supports Step5 SoftNet-communication direct to S5-PLCs
Quickbestellung INFOMAIL
by e-mail
635,- €
plus VAT. and shipping

9359-LAN-PATH
S5-LAN with path-selection promotion

Promotes the path-selection of the Step5-software
Quickbestellung INFOMAIL
by e-mail
2004,- €
plus VAT. and shipping

All prices plus costs of delivery, shipping insurance and VAT.

9359-RK-RS
S5-3964R-LAN RS232-version

Communication with 3964/9364R-client with S7-TCPIP inclusive adapter cable (15pin female <=> 9pin male)
Quickbestellung INFOMAIL
by e-mail
890,- €
plus VAT. and shipping

9359-LAN
S5-LAN++

Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
Quickbestellung INFOMAIL
by e-mail
414,- €
plus VAT. and shipping

0,- €
plus VAT. and shipping

9391-UH
Mounting of universal DIN-rail-holder

of the relevant product, inclusive holder
Quickbestellung INFOMAIL
by e-mail
63,- €
plus VAT. and shipping

9352-ALF-ANT
Magnetic base antenna for indoor use

for ALF, ALF-UA- S5-/S7-BRIDGE cable length: 1,5m
Quickbestellung INFOMAIL
by e-mail
83,- €
plus VAT. and shipping

9352-S7-USB
S7-USB connector for Siemens S7 Controller

universal USB-module on PPI/MPI/Profibus 9,6 KBit/s up to 12MBit/s
Quickbestellung INFOMAIL
by e-mail
317,- €
plus VAT. and shipping