S5

	PG-UNI / PG-UNI-II	S5-LAN++	S5-BRIDGE	PG-USB	PG-COM	PG-ISO-SET
device type
S5-90U	x	+ext. 24V	+ext. 24V	x	x	x
S5-95U	x	+ext. 24V	+ext. 24V	x	x	x
S5-100U	x	+ext. 24V(3)	+ext. 24V	x	x	x
S5-115U	at 944 + 9359-8	at 944 + 9359-8 + ext. 24V (4)	x	x	x	x
S5-135U	at 928B + 9359-8	at 928B + 9359-8 +ext. 24V (6)	x	x	x	x
S5-155U	x	x	x	x	x	x
S5-AG110S	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG130W/B	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG150A/K/S/U	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
CP-143	x			x		x
CP-521	+CP521 adapter					+CP521 adapter(1)
CP-523	+CP523 adapter					+CP523 adapter(1)
CP-525	+9359-5			+9359-5-USB		+9359-5(1)
CP-526	x			x		x
CP-527	x			x		x
CP-528	x			x		x
CP-544	x (7)			x (7)		x (7)
CP-5430	x			x		x
CP-5431	x
IP-246	x			x		x
IP-247	x			x		x
IP-252	x			x		x
IP-266	+9359-4			x		+9359-4(1)
WF-470	+9359-4 + 9359-5-WF470			+9359-5-WF470-USB		+9359-5-WF470 + 9359-4(1)
SIN-805	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-820	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-840	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-850	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-880	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
Connection on PC	RS232-port	Ethernet RJ45	Ethernet RJ45 / WLAN/WIFI	USB-port type A	RS232-port	RS232-port
max. prolongation:	300m (UNI-extension)	300m (S5-LAN-extension) +ext. 24V	100m (PG-USB-extension)		300m (UNI-extension)
(1) ISO adapter can not be used because the required supply voltage on the PG interface of the module is not present. (2) At the CPU 6ES5 102-8MA02 Release 3 is a PG-ISO-Adapter or Netz-Adapter additional required. (3) With S5-LAN++ from HW V2.3 [2010] the "Netz-Adapter" is no more needed, this version has included current-sources. (4) With S5-LAN++ from HW V2.3 [2010] no accessories are needed, this version has included current-sources. (5) With S5-LAN++ from HW V2.3 [2010] a Sinum-Adapter with special pinning is needed. (6) Only for CPU928B with PG-ISO-Adapter and ext. 24V DC, unless there is an S5-LAN++ from HW V2.3 [2010] used. (7) CP544 has bolts at the programming-interface. The products do not fit 100% on this interface. (8) With S5-BRIDGE a Sinum-Adapter with special pinning is needed.

Remote maintenance

	TELE LINK NETWORK
	TELE-PROF-II	TELE-PROF	TELE-BOOK	MPI-Modem	TELEService	S5-LAN	S7-LAN	TeleRouter
secured modem-protocol	✓	✓	✓
additional software needed				Siemens TS -Software	Siemens TS -Software	VPN-Client	VPN-Client
Providing WinTELEPROF-software	✓	✓	✓
modem	analogue/ISDN	analogue	opt. via PCMCIA	analogue/GSM	analogue/ISDN/GSM	internet-connection	internet-connection	internet-connection
modem for world wide use	✓	✓	✓	✓	✓
interfaces
MPI/Profibus	9600-12MBd			9600-12MBd	9600-12MBd		9600-12MBd
RS232	2x	2x	2x	1x	1x
TTY	2x	2x	2x			1x
PCMCIA	2x (optionally)	1x	1x
Ethernet	10/100BaseTx					1x	1x	5x
USB	2x				1x
LCD-display	✓	✓	✓	✓	instead 10 LEDs	instead status-LED	instead webserver	instead webserver
supported PLC-protocols *
S7	✓	✓	✓	✓	✓		✓
S5	✓	✓ (optional)	✓ (optional)			✓
Pilz PSS	✓	✓ (optional)	✓ (optional)
Allen-Bradley	✓	✓ (optional)	✓ (optional)
AEG		✓ (optional)	✓ (optional)
Bosch		✓ (optional)	✓ (optional)
Telemecanique		✓ (optional)	✓ (optional)
GE-Fanuc		✓ (optional)	✓ (optional)
Klöckner-Moeller		✓ (optional)	✓ (optional)
Mitsubishi		✓ (optional)	✓ (optional)
SMS-sending/Pager(S5/S7)	✓	✓	✓		✓ (no pager)			only for analogue / ISDN
HMI-messaging module(S5/S7)	✓							✓
SMS-receive with GSM					✓
DTMF with analogue					✓
e-mail-dispatch	✓				✓			✓
FAX-dispatch(S5/S7)	✓	✓ (optional)	✓ (optional)					only for analogue / ISDN
PLC-data coupling(S5/S7)	✓	✓ (optional)	✓ (optional)			✓	✓
ASCII-transfer from S5/S7	✓	✓ (optional)	✓ (optional)			only with ASCII-LAN
internet-coupling	✓
Usage as dial-up-router	✓							✓
power supply	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC	24V/DC
dimensions w x h x d (in mm)	High: 67 x 280 x 170 FLAT: 300 x 175 x 70	300 x 175 x 66	235 x 162 x 37	90 x 162 x 54	40 x 125 x 115	42 x 15 x 65	65 x 43 x 17	154 x 92 x 28
* other PLC types on request

The upgrade for every SIMATIC S5-PLC without changes to the hardware- and software-configuration to S7-300 with CP343-1.
Integration of the "old system" into the world of "new and modern systems" using S7-TCPIP with PUT/GET-function.
By plugging the module onto the PG-interface of an S5-PLC, this connection becomes a universally usable connection, a "multi-connection". Multiple and parallel communications at the same time, such as WinCC, PUT/GET from S7-PLC, production-data acquisition, S7-communication-drivers and programming-packages such as Step5 or PG2000.

Advantages:

• Simple and fast networking
• Multiplexer for all protocols
• Integration as S7-300 (CP 343-1)
• Access to S5-data via S7-TCP/IP with PUT/GET
• Qualified support
• Comprehensive documentation

Anschlussmöglichkeiten:

• S5-LAN++ direkt auf PG-Schnittstelle der S5
• S5-LAN++ über Multiplexer PG-MUX-II auf PG-Schnittstelle der S5
• S5-LAN++-Derivat für 3964R über Adapterkabel an CP524/525
• an PC direkt verbunden mit Patch-Kabel
• an PC direkt verbunden mit Cross-Kabel
• an PC über Hub/Switch

Features:

• fastest installation to the network of every SIMATIC - S5
• no complicated installation, simply plug on 15pin PD-interface and communicate
• no change in the software in the PLC
• SIMATIC S5 protocols
  AS511, RK 512, SINEC-H1 and ISO-on-TCP (RFC 1006)
• supported Controls
  S5-90U, S5-95U, S5-100U, S5-115U, S5-135U, S5-150U (via intermediate adapter), S5-155U, Sinumerik 810/880 (via intermediate adapter) and COMCON 110 from Berthel
• supported data areas
  inputs, outputs, flags (also S5 s-flag), datea blocks (also S5 dx-block), timer and counter
• easiest configuration with Windows tool (S5 LAN manager)
• at the same time two PG-, four OP/Visualization- and two RFC1006-channel (ISO on TCP)
• speak to S5 as a S7
• integrated multiplexer, parallel use of all protocols
  Programming and visualizing simultaneously without any special configuration
• external 24V supply optional, otherwise automatically directly from S5-PG socket (from S5-115U)
• supported platforms
  S7-TCPIP RFC1006-communication platform independent, otherwise configuration tools/virtual com port for Windows (any) 32/64bit

• Timely communication with the S5-PLC through integrated firmware
• PUT/GET via S7-TCP/IP-access to S5-data (I/O/M/DB/DX/Z/T/S-flags)
• S7-S5-coupling with PUT/GET S7-300/400/1200/1500
• Coupling with WinCC, OPC-server and S7-TCP/IP-software-driver such as IP-S7-LINK (S7 compatible)
• S5 TCP/IP Layer 4
• Access from applications/devices via FETCH/WRITE-protocol to the connected S5-PLC
• S5-LAN-Link (open protocol)
• Compatible with S5-VIPA-TCP/IP
• RFC-1006 connection => pure ISOonTCP (handling blocks scope of delivery)
• RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported

• with WinCC Flexible / TIA (e.g. MP377, TP177B) via S7-TCP/IP to the Simatic S5 (CP-343-1 compatible)
• data exchange between S5 - S5 and S5 - S7 via TCP/IP
• ideal for process visualization
• programming with STEP 5 via Ethernet
• DHCP / Auto-IP supported
• variants: 3964R-LAN, ASCII-LAN, PG-LAN, as RS232-version and for the MUX757
• driver-DLL for Windows available, EXCEL and WORD can read/write S5-data
• including a free Classic OPC-DA-server license "OPC-Manager lite" [limited to 100 items]
• examples and demo-version of communication driver as download available

Applications:

• Connection to SCADA / data-acquisition systems
• Data exchange with S7-PLC (300/400/1200/1500)
• S7-panel as replacement for defective, no more deliverable S5-panel
• remote programming (also via the Internet))
• control central all controls in the plant

Supported S5 protocols / connection-paths:

• AS511 via virtual COM-port PLCVCom
• S7-TCP/IP with PUT/GET-function
• ISO-on-TCP (RFC 1006)
• TCP/IP with H1/ISO-on-TCP
• TCP/IP with RK 512 (3964 and 3864R)

Addressing of the S5-data via S7-TCP-protocol:
The implementation of the data in S5 is largely identical to the S7 and works completely autonomously. F/I/O/T/C are addressed read/write identically. Even a necessary conversion of the data-types such as S5-float (in KG-format) to S7-float (according to IEEE-754) takes place automatically in both directions. The address must be converted for DB/DX and S-flags.
For the data blocks, this is usually a factor of 2. You can find examples for DL and DR in the data word in the table:

Simatic S5	Simatic S7	Format
FB11	FB11	BYTE
FW20	FW20	WORD
DB10 DW 9	DB10.DBW18	WORD
DB10 DW60	DB10.DBW120	WORD
DB10 DL3	DB10.DBB6	BYTE
DB10 DR3	DB10.DBB7	WORD
DB10 DD 25	DB10.DBD50	DWORD
DB10 DD 35	DB10.DBD70	Real

Addressing S5 DX-Blocks with S7-TCP/IP

DX Block nr	mapped to S7-DB nr
DX 1	DB 257
DX 2	DB 258
DX 100	DB 356

Addressiing S5 S-Flag over S7 TCP/IP
Since the S7 does not recognize the S-flags, the S-flags are mapped as data block DB 1000. That means reading and writing on DB 1000 means reading and writing the S-flags
The following applies in the table: x = S-flag number, y = bit number

S-Flag	mapped to S7-DB nr
S x.y	DB1000.DBX x.y
SY x	DB1000.DBB x
SW x	DB1000.DBW x
SD x	DB1000.DBD x

S5 goes INDUSTRIE 4.0 (only in german) (Mouse click for enlargement)

Supply voltage:	24V DC +/- 20%
Power consumption:	2 watt
Display:	status-LED
Handling/Configuration:	reset-switch-key (factory setting) S5-LAN Manager
Interfaces:	to the PLC: TTY/20mA current loop (S5-LAN activ, S5-PLC passive) to the PD/PC: 10/100BaseTX RJ45-ethernet jack (auto select)
Operating system:	Configuration and operation via virtual COM-interface: MS-Windows XP/2000/7/8/10/11/Server Operation via TCP/IP server: any operating system with a TCP/IP stack
Operating temperature:	0 - 55°C
Case:	ABS-plastic case
Dimensions:	42 x 15 x 65 mm
Scope of delivery:
	S5-LAN++-module Power connector 2pins small

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

Internet

TeleRouter
The simple and quick router solution for automation

S5-TCP/IP 100
Turbo ethernet for PLC-oldie Simatic S5

S5 over LAN

S5-BRIDGE
Simatic S5 ethernet gateway with Wifi for TTY

CONNECT devices
Remotesupport without configuration / Machine access without IT

Internet-coupling/communication

CONNECT devices
Remotesupport without configuration / Machine access without IT

S7-LAN
smallest simatic S7 ethernet gateway with PD-socket, multifunctional, 1 adapter for all PPI, MPI and Profibus applications
with ext. 24V-connector
easy remote maintenance over internet

ALF-UA
Industrial WLAN-Router +++ High-speed datarate 150 Mbit/s +++ Integrated firewall +++ Din-rail-mounting +++ Make your own WIFI

TeleRouter
The simple and quick router solution for automation

All prices plus costs of delivery, shipping insurance and VAT.