S5-BRIDGE
Successor: TELE-PROFessional II worldwide use (Art.No: 9372-OEM)
Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.
Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.
! Parallel access via LAN/WIFI thanks to included multiplexer !
more...
ONLINE with S5PLC without cable +++ S5-adapter 90-155U/CPs/IPs +++ No WIFi-infrastructure +++ Integrated access-point +++ Configuration via WebAccess +++ S5 Bridge (TTY - LAN - WIFI)
worldwide PLC remote maintenance
German version (complex adaptation)
Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.
Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.
! Parallel access via LAN/WIFI thanks to included multiplexer !
more...
variants:
ARTNR: 9371
TELE-PROFessional
Obsolete
ARTNR: 9371
TELE-PROFessional
Obsolete
EAN number: | 4260363242172 | |
HS-code: | 85389099 | |
Weight: | 2.4 kg |
Remote maintenance
TELE LINK NETWORK
|
||||||||
secured modem-protocol |
✓
|
✓
|
✓
|
|||||
additional software needed |
Siemens TS -Software
|
Siemens TS -Software
|
VPN-Client
|
VPN-Client
|
||||
Providing WinTELEPROF-software |
✓
|
✓
|
✓
|
|||||
modem |
analogue/ISDN
|
analogue
|
opt. via PCMCIA
|
analogue/GSM
|
analogue/ISDN/GSM
|
internet-connection
|
internet-connection
|
internet-connection
|
modem for world wide use |
✓
|
✓
|
✓
|
✓
|
✓
|
|||
interfaces | ||||||||
MPI/Profibus |
9600-12MBd
|
9600-12MBd
|
9600-12MBd
|
9600-12MBd
|
||||
RS232 |
2x
|
2x
|
2x
|
1x
|
1x
|
|||
TTY |
2x
|
2x
|
2x
|
1x
|
||||
PCMCIA |
2x (optionally)
|
1x
|
1x
|
|||||
Ethernet |
10/100BaseTx
|
1x
|
1x
|
5x
|
||||
USB |
2x
|
1x
|
||||||
LCD-display |
✓
|
✓
|
✓
|
✓
|
instead 10 LEDs
|
instead status-LED
|
instead webserver
|
instead webserver
|
supported PLC-protocols * | ||||||||
S7 |
✓
|
✓
|
✓
|
✓
|
✓
|
✓
|
||
S5 |
✓
|
✓ (optional)
|
✓ (optional)
|
✓
|
||||
Pilz PSS |
✓
|
✓ (optional)
|
✓ (optional)
|
|||||
Allen-Bradley |
✓
|
✓ (optional)
|
✓ (optional)
|
|||||
AEG |
✓ (optional)
|
✓ (optional)
|
||||||
Bosch |
✓ (optional)
|
✓ (optional)
|
||||||
Telemecanique |
✓ (optional)
|
✓ (optional)
|
||||||
GE-Fanuc |
✓ (optional)
|
✓ (optional)
|
||||||
Klöckner-Moeller |
✓ (optional)
|
✓ (optional)
|
||||||
Mitsubishi |
✓ (optional)
|
✓ (optional)
|
||||||
SMS-sending/Pager(S5/S7) |
✓
|
✓
|
✓
|
✓ (no pager)
|
only for analogue / ISDN
|
|||
HMI-messaging module(S5/S7) |
✓
|
✓
|
||||||
SMS-receive with GSM |
✓
|
|||||||
DTMF with analogue |
✓
|
|||||||
e-mail-dispatch |
✓
|
✓
|
✓
|
|||||
FAX-dispatch(S5/S7) |
✓
|
✓ (optional)
|
✓ (optional)
|
only for analogue / ISDN
|
||||
PLC-data coupling(S5/S7) |
✓
|
✓ (optional)
|
✓ (optional)
|
✓
|
✓
|
|||
ASCII-transfer from S5/S7 |
✓
|
✓ (optional)
|
✓ (optional)
|
only with ASCII-LAN
|
||||
internet-coupling |
✓
|
|||||||
Usage as dial-up-router |
✓
|
✓
|
||||||
power supply |
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
24V/DC
|
dimensions w x h x d (in mm) |
High: 67 x 280 x 170
FLAT: 300 x 175 x 70 |
300 x 175 x 66
|
235 x 162 x 37
|
90 x 162 x 54
|
40 x 125 x 115
|
42 x 15 x 65
|
65 x 43 x 17
|
154 x 92 x 28
|
* other PLC types on request |
Also available as a set for universal use: S5/S7-BRIDGE-WIFI-Sets
Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.
Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.
! Parallel access via LAN/WIFI thanks to included multiplexer !
Quite simply directly for all Siemens Step5, PG-2000, any other S5 package and WinCC projects.
New from firmware version V1.08:
One IP-address for WIFI- and PLC-communication, the device itself recognizes which part of the device you want to access. A very simple thing, no address confusion with different IP-addresses.
Convince yourself of the new and simple functionality. Download the new firmware via the download tab and after the update has been completed, trigger the factory setting in the BRIDGE-interface, the device can now be reached via 192.168.1.56.
Download-firmware-file
Configuration-tool / update-tool for Windows XP, 7/VISTA/8/10/11 32/64 bit:
download-S5-LAN-Manager inclusive PLC-firmware-file
Highlights:
- Move around the machine without restrictions during commissioning or maintenance!
Application areas:
- Commissioning of machines directly on PLC interface.
- Connection of mobile devices to the fieldbus system.
- Universal coupling of all PLC machines, no matter which interfaces are available!
- WIFI programming adapter for service applications, once parameterized, thanks to flash memory without data loss, independent of power failures.
- PUT/GET of S7-1500/1200/300/400 (PN-CPU or with Ethernet-CP), also ACTIVE , with specified and unspecified connection possible.
- VPN remote maintenance possible, to maintain the PLC via the Internet.
- Coupling with DB-Transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or S5-Gateway.
- any TCP device writes/reads DB`s in the S5 control.
Configuration:
- Easiest configuration through intuitive operation!
The S5 bridge is designed for fast commissioning .
After the module has been plugged into the plc, only assigne the IP address is via the S5-LAN Manager. After that, the controllers can already be accessed from the network.
NO WIFI INFRASTRUCTURE REQUIRED,
ACCESS-POINT DIRECTLY INTEGRATED!
- Plug in the module, activate WLAN on the laptop, connect with Bridge-WLAN -> DONE
STEP-7 / TIA / WIN-CC / MICROWIN:
Each network device that speaks RFC1006 S7-TCP/IP, such as HMI devices or PGs can access the module directly.
The adapter can be integrated in the S7 project itself, but does not have to be, so operation is possible without changing the project .
The S7 communication runs directly via S7 TCP/IP and expands every MPI bus/PROFIBUS by a S5 network gateway.
It does not matter which control types, S7-200 / S7-300 / S7-400 , hang in the fieldbus PLC network.
- No expensive CP's needed for PLC-couplings.
- Supports remote maintenance via VPN tunnel thanks to fully integrated TCP-IP stack with gateway configuration.
Programming / Adapting / Converting
The S5 bridge can be used directly as a WLAN gateway for PLCs among each other device. Programming and visualizing S5 PLCs via WLAN is no longer a problem. Thanks to ext. Power supply usable on all controllers.
The S5 SPS Bridge with all functions is the perfect PLC network adapter for each application.
S5-Bridge is a reliable and handy S5-WIFI network adapter for every technician .
The compact design and the power supply directly from the CPU,
enable a PLC ** to be connected to the Ethernet in less than 5 minutes.
Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.
Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.
! Parallel access via LAN/WIFI thanks to included multiplexer !
Quite simply directly for all Siemens Step5, PG-2000, any other S5 package and WinCC projects.
New from firmware version V1.08:
One IP-address for WIFI- and PLC-communication, the device itself recognizes which part of the device you want to access. A very simple thing, no address confusion with different IP-addresses.
Convince yourself of the new and simple functionality. Download the new firmware via the download tab and after the update has been completed, trigger the factory setting in the BRIDGE-interface, the device can now be reached via 192.168.1.56.
Download-firmware-file
Configuration-tool / update-tool for Windows XP, 7/VISTA/8/10/11 32/64 bit:
download-S5-LAN-Manager inclusive PLC-firmware-file
Highlights:
- Parallel operation of several connections e.g. Remote maintenance, programming, visualization and much more is possible.
- Replacement for e.g. expensive CP
- Coupling to each ERP system e.g. about OPC logs.
- No PLC knowledge required
- Active module, thanks to its own power sources no influence on the S5.
- Communication with Fetch/Write
- Ideal for process visualization
- Open TCP/IP protocol
- RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported
- Available in the variants 3964R-LAN, ASCII-LAN, PG-LAN, and for MUX757.
- Move around the machine without restrictions during commissioning or maintenance!
- Work where problems are visible and comprehensible!
Application areas:
- Commissioning of machines directly on PLC interface.
- Connection of mobile devices to the fieldbus system.
- Universal coupling of all PLC machines, no matter which interfaces are available!
- WIFI programming adapter for service applications, once parameterized, thanks to flash memory without data loss, independent of power failures.
- PUT/GET of S7-1500/1200/300/400 (PN-CPU or with Ethernet-CP), also ACTIVE , with specified and unspecified connection possible.
- VPN remote maintenance possible, to maintain the PLC via the Internet.
- Coupling with DB-Transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or S5-Gateway.
- any TCP device writes/reads DB`s in the S5 control.
Configuration:
- Easiest configuration through intuitive operation!
The S5 bridge is designed for fast commissioning .
After the module has been plugged into the plc, only assigne the IP address is via the S5-LAN Manager. After that, the controllers can already be accessed from the network.
NO WIFI INFRASTRUCTURE REQUIRED,
ACCESS-POINT DIRECTLY INTEGRATED!
- Plug in the module, activate WLAN on the laptop, connect with Bridge-WLAN -> DONE
STEP-7 / TIA / WIN-CC / MICROWIN:
Each network device that speaks RFC1006 S7-TCP/IP, such as HMI devices or PGs can access the module directly.
The adapter can be integrated in the S7 project itself, but does not have to be, so operation is possible without changing the project .
The S7 communication runs directly via S7 TCP/IP and expands every MPI bus/PROFIBUS by a S5 network gateway.
It does not matter which control types, S7-200 / S7-300 / S7-400 , hang in the fieldbus PLC network.
- No expensive CP's needed for PLC-couplings.
- Supports remote maintenance via VPN tunnel thanks to fully integrated TCP-IP stack with gateway configuration.
Programming / Adapting / Converting
The S5 bridge can be used directly as a WLAN gateway for PLCs among each other device. Programming and visualizing S5 PLCs via WLAN is no longer a problem. Thanks to ext. Power supply usable on all controllers.
The S5 SPS Bridge with all functions is the perfect PLC network adapter for each application.
S5-Bridge is a reliable and handy S5-WIFI network adapter for every technician .
The compact design and the power supply directly from the CPU,
enable a PLC ** to be connected to the Ethernet in less than 5 minutes.
Remote maintenance / telecontrol of PLC-devices
Access to the connected PLC takes place by coupling via Analogue-, ISDN- (only with AB-adapter) and GSM-(only with external GSM-modem)-line.
PLC coupling (data exchange between PLCs)
Your pumping stations report the water levels of the central control via telephone network. The central office itself can of course transmit commands/messages to the substations as well. Thereto no
dedicated line is required, a “normal” telephone connection is sufficient because the devices hangs up the line after occured message.
PLC-coupling (data exchange between PLC-devices)
Your outstation reports the current value cyclically, or in case of malfunction the status via FAX, to your mobile phone as SMS or to your pager.
Sending ASCII-data to a PC
Your car park or control sends the configuration/capacity utilisation to a PC with a modem, so that the data can be used for further processing.
Direct-mode „extended serial interface“
There is an unsupported control or data logger or converter integrated in your installation which protocol is not supported? No problem, the signs that the PC in the office sends will be
transferred via telephone line by the Direct-mode , and on-site reproduced by the TP/TB. The way back is identical. So in that case there’s also a communication to the electronic devices
available.
Supply voltage: | 24V DC +/- 20% |
Power consumption: | 5 watt |
Display: | expressive LCD-display |
Handling/Configuration: |
integrated keypad Tele-Manager |
Interfaces: |
to the PLC:
TTY/20mA current loop (AG-TELE aktiv, PLC passiv)RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:
TTY/20mA current loop (100 % mechanically and electr. compatible)RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:
1 x parallel port, 1 x PCMCIA |
Integrated modem: | 33K6-analogue modem with BZT-approval |
Operating temperature: | 0 - 55°C |
Case: | powder coated metal case with mounting flange |
Dimensions: | 280 x 170 x 55 mm |
Scope of delivery: |
TELE-PROFessional-device Power connector 2pins big |
All prices plus costs of delivery, shipping insurance and VAT.
options:
1273,00 €
plus VAT. and shipping
plus VAT. and shipping
1273,00 €
plus VAT. and shipping
plus VAT. and shipping
1273,00 €
plus VAT. and shipping
plus VAT. and shipping
9370.AB
Option TP+TB Allen-Bradley
TELE-PROFessional for Allen-Bradley PLC- or PD-TELE switchable
Option TP+TB Allen-Bradley
TELE-PROFessional for Allen-Bradley PLC- or PD-TELE switchable
1273,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
1273,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
accessories:
244,00 €
plus VAT. and shipping
plus VAT. and shipping
9361-3.06M
S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 6m
for TELE-PROF, MINI-/PG-MUX-II
9361-3
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 3m
forTELE-PROF, MINI-/PG-MUX-II
9361-3.05M
S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 5m
for TELE-PROF, MINI-/PG-MUX-II
9361-3.10M
S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
S5-connecting cable 10m
for TELE-PROF, MINI-/PG-MUX-II
63,00 €
plus VAT. and shipping
plus VAT. and shipping
9370-TM-2
TELE-Manager TWIN-option Obsolete
parallel loading of 2 SPS-types (firmware-data sets) in a TP-device
TELE-Manager TWIN-option Obsolete
parallel loading of 2 SPS-types (firmware-data sets) in a TP-device
9370-TM
TELE-Manager for Windows 3.x Obsolete
configuration / Update from PC (Windows Software)
TELE-Manager for Windows 3.x Obsolete
configuration / Update from PC (Windows Software)
218,00 €
plus VAT. and shipping
plus VAT. and shipping
27,00 €
plus VAT. and shipping
plus VAT. and shipping
11,00 €
plus VAT. and shipping
plus VAT. and shipping
59,00 €
plus VAT. and shipping
plus VAT. and shipping
11,00 €
plus VAT. and shipping
plus VAT. and shipping
4,00 €
plus VAT. and shipping
plus VAT. and shipping
29,00 €
plus VAT. and shipping
plus VAT. and shipping
9370-ISDN
ISDN-adapter for analogue terminals
full ISDN-functionality e.g. call waiting, 3-way conferencing, broker's call
ISDN-adapter for analogue terminals
full ISDN-functionality e.g. call waiting, 3-way conferencing, broker's call
267,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
25,00 €
plus VAT. and shipping
plus VAT. and shipping
22,00 €
plus VAT. and shipping
plus VAT. and shipping
128,00 €
plus VAT. and shipping
plus VAT. and shipping
All prices plus costs of delivery, shipping insurance and VAT.
9371
TELE-PROFessional Obsolete
Successor: TELE-PROFessional II worldwide use (Art.No: 9372-OEM)
worldwide PLC remote maintenance German version (complex adaptation)
TELE-PROFessional Obsolete
Successor: TELE-PROFessional II worldwide use (Art.No: 9372-OEM)
worldwide PLC remote maintenance German version (complex adaptation)
0,00 €
plus VAT. and shipping
plus VAT. and shipping
9371-US
TELE-PROFessional Obsolete
Successor: TELE-PROFessional II worldwide use (Art.No: 9372-OEM)
worldwide PLC remote maintenance USA-version
TELE-PROFessional Obsolete
Successor: TELE-PROFessional II worldwide use (Art.No: 9372-OEM)
worldwide PLC remote maintenance USA-version
0,00 €
plus VAT. and shipping
plus VAT. and shipping
Analogue-telefone
TELE-PROFessional-II (TP-II)
Programming of S5- and S7-PLC’s via telephone from afar
Programming of S5- and S7-PLC’s via telephone from afar
TELE-BOOK (TB)
PLC-remote maintenance also available from the car, with 12V power supply
PLC-remote maintenance also available from the car, with 12V power supply
TeleRouter
The simple and quick router solution for automation
The simple and quick router solution for automation
Analogue-telefone
TELE-BOOK (TB)
PLC-remote maintenance also available from the car, with 12V power supply
PLC-remote maintenance also available from the car, with 12V power supply
MPI / PPI - Profibusmodem
Programming of S7-PLC’s via telephone from afar
Programming of S7-PLC’s via telephone from afar
TELE-PROFessional-II (TP-II)
Programming of S5- and S7-PLC’s via telephone from afar
Programming of S5- and S7-PLC’s via telephone from afar
TeleRouter
The simple and quick router solution for automation
The simple and quick router solution for automation
TELEService analogue
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
Remote maintenance of PPI, MPI and Profibus <=> analogue 56K-, ISDN-, GSM-Modem
All prices plus costs of delivery, shipping insurance and VAT.
95,00 €
plus VAT. and shipping
plus VAT. and shipping
511,00 €
plus VAT. and shipping
plus VAT. and shipping
251,00 €
plus VAT. and shipping
plus VAT. and shipping
9359-90
CP-cable
connects PD-TTY-port of TP-I, TP-II with L1,H1,L2-CP, D-Sub 15pin (male) <=> D-Sub 15pin (male)
CP-cable
connects PD-TTY-port of TP-I, TP-II with L1,H1,L2-CP, D-Sub 15pin (male) <=> D-Sub 15pin (male)
57,00 €
plus VAT. and shipping
plus VAT. and shipping
9359-LAN
S5-LAN++
Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
S5-LAN++
Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
452,00 €
plus VAT. and shipping
plus VAT. and shipping