S5-BRIDGE

Also available as a set for universal use: S5/S7-BRIDGE-WIFI-Sets

Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.

Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.

! Parallel access via LAN/WIFI thanks to included multiplexer !
Quite simply directly for all Siemens Step5, PG-2000, any other S5 package and WinCC projects.

New from firmware version V1.08:
One IP-address for WIFI- and PLC-communication, the device itself recognizes which part of the device you want to access. A very simple thing, no address confusion with different IP-addresses.
Convince yourself of the new and simple functionality. Download the new firmware via the download tab and after the update has been completed, trigger the factory setting in the BRIDGE-interface, the device can now be reached via 192.168.1.56.
Download-firmware-file

Configuration-tool / update-tool for Windows XP, 7/VISTA/8/10/11 32/64 bit:
download-S5-LAN-Manager inclusive PLC-firmware-file

Highlights:

Parallel operation of several connections e.g. Remote maintenance, programming, visualization and much more is possible.
Replacement for e.g. expensive CP
Coupling to each ERP system e.g. about OPC logs.
No PLC knowledge required
Active module, thanks to its own power sources no influence on the S5.
Communication with Fetch/Write
Ideal for process visualization
Open TCP/IP protocol
RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported
Available in the variants 3964R-LAN, ASCII-LAN, PG-LAN, and for MUX757.

- Move around the machine without restrictions during commissioning or maintenance!

Work where problems are visible and comprehensible!

Application areas:
- Commissioning of machines directly on PLC interface.
- Connection of mobile devices to the fieldbus system.
- Universal coupling of all PLC machines, no matter which interfaces are available!
- WIFI programming adapter for service applications, once parameterized, thanks to flash memory without data loss, independent of power failures.

- PUT/GET of S7-1500/1200/300/400 (PN-CPU or with Ethernet-CP), also ACTIVE , with specified and unspecified connection possible.
- VPN remote maintenance possible, to maintain the PLC via the Internet.
- Coupling with DB-Transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or S5-Gateway.
- any TCP device writes/reads DB`s in the S5 control.

Configuration:
- Easiest configuration through intuitive operation!

The S5 bridge is designed for fast commissioning .
After the module has been plugged into the plc, only assigne the IP address is via the S5-LAN Manager. After that, the controllers can already be accessed from the network.

NO WIFI INFRASTRUCTURE REQUIRED,
ACCESS-POINT DIRECTLY INTEGRATED!
- Plug in the module, activate WLAN on the laptop, connect with Bridge-WLAN -> DONE

STEP-7 / TIA / WIN-CC / MICROWIN:
Each network device that speaks RFC1006 S7-TCP/IP, such as HMI devices or PGs can access the module directly.
The adapter can be integrated in the S7 project itself, but does not have to be, so operation is possible without changing the project .
The S7 communication runs directly via S7 TCP/IP and expands every MPI bus/PROFIBUS by a S5 network gateway.
It does not matter which control types, S7-200 / S7-300 / S7-400 , hang in the fieldbus PLC network.
- No expensive CP's needed for PLC-couplings.
- Supports remote maintenance via VPN tunnel thanks to fully integrated TCP-IP stack with gateway configuration.

Programming / Adapting / Converting
The S5 bridge can be used directly as a WLAN gateway for PLCs among each other device. Programming and visualizing S5 PLCs via WLAN is no longer a problem. Thanks to ext. Power supply usable on all controllers.
The S5 SPS Bridge with all functions is the perfect PLC network adapter for each application.

S5-Bridge is a reliable and handy S5-WIFI network adapter for every technician .
The compact design and the power supply directly from the CPU,
enable a PLC ** to be connected to the Ethernet in less than 5 minutes.


Supply voltage:	24V DC +/- 20%
Power consumption:	8,5 watt
Display:	WEB-Browser 1 status LED bicolor
Frequency bands:	GSM: 850/1900MHz UMTS: B2/B4/B5 LTE FDD: B2/B4/B5/B12/B17 LTE/UMTS receive diversity
Transmission power:	Class 4 (33dBm±2dB) GSM850 and EGSM900 Class 1 (30dBm±2dB) DCS1800 and PCS1900 Class E2 (27dBm±3dB) GSM850 and EGSM900 8-PSK Class E2 (26dBm±3dB) DCS1800 and PCS1900 8-PSK Class 3 (24dBm+1/-3dB) UMTS B1/B2/B4/B5/B8 Class 3 (23dBm±2dB) LTE FDD B1/B2/B3/B4/B5/B7/B8/B12/B17/B20
LTE-features:	Support of Category3 FDD and corresponds with 3GPP R9 Support of 1.4 upto 20MHz RF bandwidth Support of 2 × 2 MIMO in DL Richtung Max 100Mbps (DL), Max 50Mbps (UL)
WCDMA features:	R99 CS data: Max 64kbps (DL), Max 64kbps (UL) R99 PS data: Max 384kbps (DL), Max 384kbps (UL) R5 HSDPA: Max 7.2Mbps (DL) R6 HSUPA: Max 5.76Mbps (UL) R7 HSPA+: Max 21Mbps (DL), Max 5.76Mbps (UL) R8 DC-HSPA+: Max 42Mbps (DL)
Handling/Configuration:	WEB-Browser
Interfaces:	Slot for microSD Antenna-connector SMA(f) (2.4 GHz IEEE 802.11b/g) 10/100BaseTX RJ45-ethernet-plug Button for factory settings Antenna-connector RP-SMA
Overvoltage category:	CAT IV
Insulation value network <=> mains voltage:	1,5 KV
Operating temperature:	0 - 55°C
Case:	ABS-plastic case V0
Dimensions:	100 x 112 x 45 mm

Scope of delivery:	EtherSens Basic LTE-stub-antenna WIFI-stub-antenna