S5-BRIDGE

Also available as a set for universal use: S5/S7-BRIDGE-WIFI-Sets

Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.

Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.

! Parallel access via LAN/WIFI thanks to included multiplexer !
Quite simply directly for all Siemens Step5, PG-2000, any other S5 package and WinCC projects.

New from firmware version V1.08:
One IP-address for WIFI- and PLC-communication, the device itself recognizes which part of the device you want to access. A very simple thing, no address confusion with different IP-addresses.
Convince yourself of the new and simple functionality. Download the new firmware via the download tab and after the update has been completed, trigger the factory setting in the BRIDGE-interface, the device can now be reached via 192.168.1.56.
Download-firmware-file

Configuration-tool / update-tool for Windows XP, 7/VISTA/8/10/11 32/64 bit:
download-S5-LAN-Manager inclusive PLC-firmware-file

Highlights:

• Parallel operation of several connections e.g. Remote maintenance, programming, visualization and much more is possible.
• Replacement for e.g. expensive CP
• Coupling to each ERP system e.g. about OPC logs.
• No PLC knowledge required
• Active module, thanks to its own power sources no influence on the S5.
• Communication with Fetch/Write
• Ideal for process visualization
• Open TCP/IP protocol
• RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported
• Available in the variants 3964R-LAN, ASCII-LAN, PG-LAN, and for MUX757.

- Move around the machine without restrictions during commissioning or maintenance!

• Work where problems are visible and comprehensible!

Application areas:
- Commissioning of machines directly on PLC interface.
- Connection of mobile devices to the fieldbus system.
- Universal coupling of all PLC machines, no matter which interfaces are available!
- WIFI programming adapter for service applications, once parameterized, thanks to flash memory without data loss, independent of power failures.

- PUT/GET of S7-1500/1200/300/400 (PN-CPU or with Ethernet-CP), also ACTIVE , with specified and unspecified connection possible.
- VPN remote maintenance possible, to maintain the PLC via the Internet.
- Coupling with DB-Transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or S5-Gateway.
- any TCP device writes/reads DB`s in the S5 control.

Configuration:
- Easiest configuration through intuitive operation!

The S5 bridge is designed for fast commissioning .
After the module has been plugged into the plc, only assigne the IP address is via the S5-LAN Manager. After that, the controllers can already be accessed from the network.

NO WIFI INFRASTRUCTURE REQUIRED,
ACCESS-POINT DIRECTLY INTEGRATED!
- Plug in the module, activate WLAN on the laptop, connect with Bridge-WLAN -> DONE

STEP-7 / TIA / WIN-CC / MICROWIN:
Each network device that speaks RFC1006 S7-TCP/IP, such as HMI devices or PGs can access the module directly.
The adapter can be integrated in the S7 project itself, but does not have to be, so operation is possible without changing the project .
The S7 communication runs directly via S7 TCP/IP and expands every MPI bus/PROFIBUS by a S5 network gateway.
It does not matter which control types, S7-200 / S7-300 / S7-400 , hang in the fieldbus PLC network.
- No expensive CP's needed for PLC-couplings.
- Supports remote maintenance via VPN tunnel thanks to fully integrated TCP-IP stack with gateway configuration.

Programming / Adapting / Converting
The S5 bridge can be used directly as a WLAN gateway for PLCs among each other device. Programming and visualizing S5 PLCs via WLAN is no longer a problem. Thanks to ext. Power supply usable on all controllers.
The S5 SPS Bridge with all functions is the perfect PLC network adapter for each application.

S5-Bridge is a reliable and handy S5-WIFI network adapter for every technician .
The compact design and the power supply directly from the CPU,
enable a PLC ** to be connected to the Ethernet in less than 5 minutes.

Supply voltage:	100 - 240V AC, 50 - 60 Hz 24V DC +/- 20% USB (from PC/power-pack)
Power consumption:	6 watt
Measurement:	Supports EN 50470-1, EN 50470-3, IEC 62053-21, IEC 62053-22, and IEC 62053-23 standards Compatible with 3-phase, 3- or 4-wire (delta or wye), and other 3-phase services Supplies total (fundamental and harmonic) active, reactive and apparent energy, and fundamental active/reactive energy on each phase and on the overall system Less than 0.1% error in active and reactive energy over a dynamic range of 1000 to 1 at TA = 25°C Less than 0.2% error in active and reactive energy over a dynamic range of 3000 to 1 at TA = 25°C Supports current transformer and di/dt current sensors Dedicated ADC channel for neutral current input Less than 0.1% error in voltage and current rms over a dynamic range of 1000 to 1 at TA = 25°C Supplies sampled waveform data on all three phases and on neutral current
Display:	WEB-Browser 1 status LED bicolor
Handling/Configuration:	WEB-Browser
Interfaces:	4 x voltage-input (L1, L2, L3, N) 4 x sensor-input (B+W-terminal ever phase + N) Slot for microSD Antenna-connector SMA(f) (2.4 GHz IEEE 802.11b/g) 10/100BaseTX RJ45-ethernet-plug Button for factory settings
Overvoltage category:	CAT IV
Insulation value network <=> mains voltage:	1,5 KV
Operating temperature:	0 - 55°C
Case:	ABS-plastic case V0
Dimensions:	115 x 95 x 30 mm
Scope of delivery:	MONI WIFI-stub-antenna

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

EtherSens

EtherSens Energy
Collect energy data +++ Log energy data +++ PLC fault message dispatch +++ PLC data logging/saving +++ Implement control tasks +++ Configuration via webinterface

EtherSens Control
Capture Dig/Analog-IO +++ Log Dig/Analog-IO +++ PLC fault message-dispatch +++ PLC-data logging/saving +++ implement control-tasks +++ Datalogger with web-server +++ Digital/analogue onboard-IO

EtherSens Basic
PLC fault message dispatch +++ PLC data logging/saving +++ implement control tasks +++ Universal solution per task +++ Web page parameterization +++ EtherSens Basic

EtherSens Oxygen
Capture of gas-values +++ Monitor of gas-values +++ PLC-fault messaging +++ PLC-data logging/saving +++ Convert control tasks

All prices plus costs of delivery, shipping insurance and VAT.