S5-BRIDGE

S5

	PG-UNI / PG-UNI-II	S5-LAN++	S5-BRIDGE	PG-USB	PG-COM	PG-ISO-SET
device type
S5-90U	x	+ext. 24V	+ext. 24V	x	x	x
S5-95U	x	+ext. 24V	+ext. 24V	x	x	x
S5-100U	x	+ext. 24V(3)	+ext. 24V	x	x	x
S5-115U	at 944 + 9359-8	at 944 + 9359-8 + ext. 24V (4)	x	x	x	x
S5-135U	at 928B + 9359-8	at 928B + 9359-8 +ext. 24V (6)	x	x	x	x
S5-155U	x	x	x	x	x	x
S5-AG110S	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG130W/B	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
S5-AG150A/K/S/U	+9359-5-150 + 9359-4	+9359-5-150 + 9359-4 + ext. 24V (3)	+9359-5-150 + ext. 24V	+9359-5-150-USB		+9359-5-150 + 9359-4(1)
CP-143	x			x		x
CP-521	+CP521 adapter					+CP521 adapter(1)
CP-523	+CP523 adapter					+CP523 adapter(1)
CP-525	+9359-5			+9359-5-USB		+9359-5(1)
CP-526	x			x		x
CP-527	x			x		x
CP-528	x			x		x
CP-544	x (7)			x (7)		x (7)
CP-5430	x			x		x
CP-5431	x
IP-246	x			x		x
IP-247	x			x		x
IP-252	x			x		x
IP-266	+9359-4			x		+9359-4(1)
WF-470	+9359-4 + 9359-5-WF470			+9359-5-WF470-USB		+9359-5-WF470 + 9359-4(1)
SIN-805	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-820	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-840	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-850	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
SIN-880	+9359-6	+9359-6 + ext. 24V(5)	+9359-6 + ext. 24V(8)	+9359-6-USB		+9359-6(1)
Connection on PC	RS232-port	Ethernet RJ45	Ethernet RJ45 / WLAN/WIFI	USB-port type A	RS232-port	RS232-port
max. prolongation:	300m (UNI-extension)	300m (S5-LAN-extension) +ext. 24V	100m (PG-USB-extension)		300m (UNI-extension)
(1) ISO adapter can not be used because the required supply voltage on the PG interface of the module is not present. (2) At the CPU 6ES5 102-8MA02 Release 3 is a PG-ISO-Adapter or Netz-Adapter additional required. (3) With S5-LAN++ from HW V2.3 [2010] the "Netz-Adapter" is no more needed, this version has included current-sources. (4) With S5-LAN++ from HW V2.3 [2010] no accessories are needed, this version has included current-sources. (5) With S5-LAN++ from HW V2.3 [2010] the Sinum-Adapter 9359-6-USB is needed. (6) Only for CPU928B with PG-ISO-Adapter and ext. 24V DC, unless there is an S5-LAN++ from HW V2.3 [2010] used. (7) CP544 has bolts at the programming-interface. The products do not fit 100% on this interface. (8) With S5-BRIDGE the Sinum-Adapter 9359-6-USB is needed.

S7

	MPI/PPI	MPI - II	MPI - USB	MPI - LAN	S7 - USB	S7 - LAN	S7 - BRIDGE	S7 - GATE	S7 - LAN++
PPI-Bus
PPI 9.6 KBit/s - 19.2 KBit/s	x	x	x	x	x	x	x	x	x
Multimaster 9.6 KBit/s - 187.5 KBit/s		x	x	x	x	x	x	x	x
MPI-Bus
19.2 KBit/s	x	x	x	x	x	x	x	x	x
187.5 KBit/s	x	x	x	x	x	x	x	x	x
1.5 MBit/s		x	x	x	x	x	x	x	x
Profibus
9.6 KBit/s		x	x	x	x	x	x	x	x
19.2 KBit/s	x	x	x	x	x	x	x	x	x
45.45 KBit/s		x	x	x	x	x	x	x	x
93.75 KBit/s		x	x	x	x	x	x	x	x
187.5 KBit/s	x	x	x	x	x	x	x	x	x
500 KBit/s		x	x	x	x	x	x	x	x
1.5 MBit/s		x	x	x	x	x	x	x	x
3.0 MBit/s		x	x	x	x	x	x	x	x
6.0 MBit/s		x	x	x	x	x	x	x	x
12.0 MBit/s		x	x	x	x	x	x	x	x
Profibus-profile
DP	x(12)	x	x	x	x	x	x	x	x
standard	x(12)	x	x	x	x	x	x	x	x
universal(DP/FMS)		x	x	x	x	x	x	x	x
RS 232
9.6 KBit/s	x(19)	x(19)
19.2 KBit/s	x	x
38.4 KBit/s	x	x
57.6 KBit/s	x(9)	x(9)
115.2 KBit/s	x(9)	x(9)
USB
USB 1.1 (6)		x(1)	x		x(2)
LAN
10/100BaseTx				x(7)		x	x	x	x
WIFI
2.4 GHz							x
TeleService operation
with S7-300/400	x(14)(18)	x(14)(18)
baud rates at TS-operation directly at the PC
9.6 KBit/s	x	x
19.2 KBit/s	x	x
38.4 KBit/s	x(8)	x(8)
57.6 KBit/s	x(8)	x(8)
baud rates at TS-operation directly with a modem
9.6 KBit/s	x	x
19.2 KBit/s	x	x
38.4 KBit/s	x	x
57.6 KBit/s	x	x
115.2 KBit/s	x	x
HMI
9.6 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
19.2 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
38.4 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
57.6 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
115.2 KBit/s	x	x	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)	x(13)
update
firmware-update	x(10)	x(10)	x(15)	x(15)	x(15)	x(15)	x(15)	x(15)	x(15)
input/online help
keypad		x	x	x		x(21)	x(21)	x(21)	x(21)
display	x	x	x	x		x(21)	x(21)	x(21)	x(21)
PD connections (maximum)
PLCVCOM		1	1	1	1	1	1	1	1
RFC1006				8		8	32	32	32
AG connections (maximum)
passive subscriber	1	15	15	15	15	15	15	15	15
active subscriber	126	126	126	126	126	126	126	126	126
more functions
integrated PLC-firewall							x	x	x
display diagnostic-buffer in the webbrowser							x	x	x
webserver for configuration				x		x	x	x	x
Remote access over existing VPN-channel				x		x	x	x	x
Access via existing WLAN-channel				x		x	x	x	x
status/control variable				x		x	x	x	x
S7 on S7/S5 DB exchange				x		x	x	x	x
S5 on MPI DB exchange		only as S5toMPI
S7 on MPI (Send/Fetch)				x		x	x	x	x
Profinet Gateway				x		x	x	x	x
Time in PLC from NTP-server				x		x	x	x	x
galvanic separation
to the bus (screen connected through)	1KV	1KV	1KV	1,5KV	1KV	1,5KV	1,5KV	1,5KV	1,5KV
mounting
wall monuting (with opt. wall mounting-set)	x	x	x	x
upgrading with
CheapConn+cable	x	x	x	x
supports
WIN 98	x	x(3)		x		x	x	x	x
WIN 98 SE	x	x	x	x	x	x	x	x	x
WIN ME	x	x	x	x	x	x	x	x	x
WIN NT	x	x(5)	x(5)	x	x(5)
WIN 2000	x	x	x	x	x	x	x	x	x
WIN XP Home (4)	x	x	x	x	x	x	x	x	x
WIN XP Professional	x	x	x	x	x	x	x	x	x
Vista(32bit)	x	x	x	x	x	x	x	x	x
Win7(32bit)	x	x	x	x	x	x	x	x	x
Win7(64bit)	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win8/8.1	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win10	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
Win11	(22)	x(23)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)	x(20)
(1) just with USB-cable plug <-> plug, type A <-> A, item number: 9352.1 (2) just with USB-cable plug <-> plug, type A <-> mini B, item number: 9352.3 (3) only serial communication (4) Siemens Step7 V5.2 and higher dont run with this operationing system (5) USB-communication is only possible with the special driver for Win NT (6) USB 2.0 is backward compatible to 1.1 (7) Cable is designed for direct connection to PC network card socket. It can also be a hub / switch with uplink port or operated at a hub / switch with automatic detection of assignement and adaptation (8) only in combination with the MPI-Speed-driver („continously-active“) (9) Siemens Step7 supports these baud rates only with the MPI-Speed-Utility (10) Update directly with PC or via Tele-Network if the cable is connected to a device of the Tele-Network-family (Tele-Link, Tele-Book or Tele-Professional) (11) only in the mode: MultiMaster-Mode (12) up to a maximum baud rate of 187.5 KBit/s (13) In this transmission, the baud rate is irrelevant, because it communicates via a virtual COM-port. (14) with the use of the TS-adapter / item number: 9350.TS (15) Update directly with PC and TIC-driver (18) Operation requires Step 7 with additional software Tele-Service (TS) from Siemens (19) only at PPI-communication possible (20) Only with TIC-driver (21) with integrated webserver possible (22) No support of Siemens Step7-software possible (23) Only with USB and with TIC-driver

Also available as a set for universal use: S5/S7-BRIDGE-WIFI-Sets

Product Overview:
Our S5-BRIDGE is the world's smallest WIFI gateway to all your S5 controllers.
With integrated WIFI and Ethernet interface, in one housing _, mobile access to all PLC systems is no problem.
Wireless access to the AS511, SI1, SI2 interface on all S5 controllers is no longer an obstacle, as is access to all other network components.
At the same time, the system works as a S5 network adapter for programming, remote maintenance and for coupling the various PLCs.

Thanks to the integrated S7 protocol, each HMI devices, e.g. current panel series, as well as any other S7-Ethernet device, can be connected directly via S7-TCP-IP via LAN & WIFI.

! Parallel access via LAN/WIFI thanks to included multiplexer !
Quite simply directly for all Siemens Step5, PG-2000, any other S5 package and WinCC projects.

New from firmware version V1.08:
One IP-address for WIFI- and PLC-communication, the device itself recognizes which part of the device you want to access. A very simple thing, no address confusion with different IP-addresses.
Convince yourself of the new and simple functionality. Download the new firmware via the download tab and after the update has been completed, trigger the factory setting in the BRIDGE-interface, the device can now be reached via 192.168.1.56.
Download-firmware-file

Configuration-tool / update-tool for Windows XP, 7/VISTA/8/10/11 32/64 bit:
download-S5-LAN-Manager inclusive PLC-firmware-file

Highlights:

• Parallel operation of several connections e.g. Remote maintenance, programming, visualization and much more is possible.
• Replacement for e.g. expensive CP
• Coupling to each ERP system e.g. about OPC logs.
• No PLC knowledge required
• Active module, thanks to its own power sources no influence on the S5.
• Communication with Fetch/Write
• Ideal for process visualization
• Open TCP/IP protocol
• RK 512 and TCP/IP H1-ISO-On-TCP RFC1006 (CP1430 TCP) supported
• Available in the variants 3964R-LAN, ASCII-LAN, PG-LAN, and for MUX757.

- Move around the machine without restrictions during commissioning or maintenance!

• Work where problems are visible and comprehensible!

Application areas:
- Commissioning of machines directly on PLC interface.
- Connection of mobile devices to the fieldbus system.
- Universal coupling of all PLC machines, no matter which interfaces are available!
- WIFI programming adapter for service applications, once parameterized, thanks to flash memory without data loss, independent of power failures.

- PUT/GET of S7-1500/1200/300/400 (PN-CPU or with Ethernet-CP), also ACTIVE , with specified and unspecified connection possible.
- VPN remote maintenance possible, to maintain the PLC via the Internet.
- Coupling with DB-Transfer to S7-LAN, S7-Gateway, S7-CP, S5-LAN++ or S5-Gateway.
- any TCP device writes/reads DB`s in the S5 control.

Configuration:
- Easiest configuration through intuitive operation!

The S5 bridge is designed for fast commissioning .
After the module has been plugged into the plc, only assigne the IP address is via the S5-LAN Manager. After that, the controllers can already be accessed from the network.

NO WIFI INFRASTRUCTURE REQUIRED,
ACCESS-POINT DIRECTLY INTEGRATED!
- Plug in the module, activate WLAN on the laptop, connect with Bridge-WLAN -> DONE

STEP-7 / TIA / WIN-CC / MICROWIN:
Each network device that speaks RFC1006 S7-TCP/IP, such as HMI devices or PGs can access the module directly.
The adapter can be integrated in the S7 project itself, but does not have to be, so operation is possible without changing the project .
The S7 communication runs directly via S7 TCP/IP and expands every MPI bus/PROFIBUS by a S5 network gateway.
It does not matter which control types, S7-200 / S7-300 / S7-400 , hang in the fieldbus PLC network.
- No expensive CP's needed for PLC-couplings.
- Supports remote maintenance via VPN tunnel thanks to fully integrated TCP-IP stack with gateway configuration.

Programming / Adapting / Converting
The S5 bridge can be used directly as a WLAN gateway for PLCs among each other device. Programming and visualizing S5 PLCs via WLAN is no longer a problem. Thanks to ext. Power supply usable on all controllers.
The S5 SPS Bridge with all functions is the perfect PLC network adapter for each application.

S5-Bridge is a reliable and handy S5-WIFI network adapter for every technician .
The compact design and the power supply directly from the CPU,
enable a PLC ** to be connected to the Ethernet in less than 5 minutes.

Supply voltage:	24V DC +/- 20%
Power consumption:	2,5 watt
Display:	double lined LCD-display
Handling/Configuration:	Kabelmanager-Software keypad on the back
Interfaces:	to the PLC: PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd to the PD/PC: RS232: 9,6 KBd - 115,2 KBd USB 1.1 for cable type A <-> A
Operating temperature:	0 - 55°C
Case:	ABS-plastic case
Dimensions:	146 x 41 x 29 mm
Scope of delivery:	S5anMPI-cable Power connector 2pins small

All prices plus costs of delivery, shipping insurance and VAT.

All prices plus costs of delivery, shipping insurance and VAT.

RS232

MPI-II
Universal S7interface-cable +++ RS232/USB to PPI/MPI/PROFIBUS +++ For HMI-USB applications +++ Bus-status on display

S5 over RS232

PG-COM
Couples the PC (9 pol. COM-interface) with the 15 pol. X4/X5 interface port of the PLC

PG-UNI
Couples the PC (9 pol. COM-interface) with the 15 pol. X4/X5 interface port of the PLC

PG-UNI II
Couples the PC (9 pol. COM-interface) with the 15 pol. X4/X5 interface port of the PLC

PG-ISO-set
PLC-communication with 1000V galvanic separation without power supply

MPI/PPI
S7-Interface cable for PPI, MPI, TS, HMI <=> RS232 applications

All prices plus costs of delivery, shipping insurance and VAT.