Profibus-Plug-DiagConn PB
Join a subscriber with an integrated test function
for PROFIBUS with diagnosis function
country of origin: Germany
not preferential
- Status display for bus test functions
- High interference resistance because of full metal case
- Visual connection control
- Cable connection via comfortable insulation displacement technology
- Captive one-screw mounting system
more...
ARTNR: 9350-9-DIAG
DiagConn 90° Highend-connector
EAN number: | 4260363240666 | |
HS-code: | 85369010 | |
Weight: | 0.1 kg |
- Status display for bus test functions
- High interference resistance because of full metal case
- Visual connection control
- Cable connection via comfortable insulation displacement technology
- Captive one-screw mounting system
- Integrated shiftable load resistor
- Cable outlet versions 0° / 45° / 90°
Bus problems and no reason apparent?
Connect the diagnostic-bus-connector to the "suspicious" PLC and read the possible cause of the fault using the blink-code:
- 5V voltage missing/out of specification
- possible short-circuit in the bus
- No bus-activity on the PLC
- Wrong termination
- Bus is open
...
The bus-connectors of the "DiagConn"-series indicate all of these possible causes of the malfunction. The bus-connector is available in 90°, 45° and 0°-versions.
The connectors can be attached instead of the "normal" bus-connectors. There does not have to be a fault, the plugs can generally also be used in
the bus and you can later find the cause of any possible failures more easily and quickly.
Supply voltage: | 5V DC |
Power consumption: | 0,15 watt |
Display: | 4 status-LEDs |
Interfaces: |
to the PLC:
PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
to the PD/PC:
PD/diagnosis-socket (only at the 45° and 90° variant)
others:
2 x appliance for connecting a 8mm buscable |
Operating temperature: | -20 - +75°C |
Case: | zinc-diecast |
Dimensions: | 66 x 40 x 16 mm |
Scope of delivery: | DiagConn |
DiagConn 90° Highend-connector
for PROFIBUS with diagnosis function country of origin: Germany not preferential
plus VAT. and shipping
DiagConn 0° Highend-connector Obsolete
Successor: DiagConn 45° Highend-connector (Art.No: 9350-4-DIAG)
for PROFIBUS with diagnosis functions
plus VAT. and shipping
plus VAT. and shipping
Connector plug / equipment
Connection of a Profibus node to the bus line
for DIN-rail-holder
Simple and quick mounting of MPI cables on the DIN-rail
Usage of the 24V supply pins from the plugged subscriber (eg. S7-PLC)
connecting your S7 with an additional subscriber / device
connecting your S7 with an additional subscriber / device
Power adapter for MPI-cable
Power adapter for MPI-cable
Parallel connection of a MPI cable on the bus
Provides PPI, MPI- and Profibus
Simple and quick mounting of devices on the DIN-rail
Connecting a serial MPI cable to a modem
Easy profinet-connection by a click
Joining a CheapConn to an MPI cable for parallel connection on the bus
Simple and quik mounting of MPI cables at the wall
S7-LAN connector for Siemens S7 PLC controller
Network-connection for the S7-200/300/400-PLC +++ S7-adapter PPI/MPI/PROFIBUS +++ Of developer and manufacturer +++ Smallest Ethernet-gateway S7 +++ Network for each S7-PLC +++ Fast commissioning +++ Replacement for CP343-1/443-1
plus VAT. and shipping
plus VAT. and shipping
DiagConn 0° Highend-connector Obsolete
Successor: DiagConn 45° Highend-connector (Art.No: 9350-4-DIAG)
for PROFIBUS with diagnosis functions
plus VAT. and shipping
S5-LAN++
Industrial Ethernet <> S5 PD-interface (TTY) Including Gateway Plus and S7-TCP / IP functions
plus VAT. and shipping
plus VAT. and shipping
S7-USB connector for Siemens S7 Controller
universal USB-module on PPI/MPI/Profibus 9,6 KBit/s up to 12MBit/s
plus VAT. and shipping