Programming of S5- and S7-PLC’s via telephone from afar
- Secured modem-protocol, no additional software needed
- UMTS- / VPN- / internet-service
- Also for PLC’s with ProfiNet
- SMS and fax sending directly from S7-300/400 (no PLC-programming necessary)
- Analogue modem couples automatically via ISDN
- With integrated CP-343-1 / 443-1 functionality
- Ethernet also for router function
- PCMCIA-slots (only for version -H) for extensions (memory cards / specific modem cards (GSM) / WLAN)
- Compatible to the forerunner model (TELE-Prof / TELE-Book / TELE-Link)
- Also as TCP/IP-router
- S7-variables display via Web-Browser
- S7-remote maintenance with MPI-Interface
- S5-remote maintenance (access to every S5 direct / via H1, L1, L2 and KOR/MUX)
- Integrated telephone directory
- Call-back of partner possible
- Software-update via PC (LAN) respectively from device to device possible
|Supply voltage:||24V/DC +/- 20%|
|Power consumption:||15 watt|
expressive LCD display
5 status LEDs
to the PLC:PPI/MPI/Profibus interface: 9,6 KBd - 12 MBd
TTY/20mA current loop (AG-TELE aktiv, PLC passiv)
RS232: 9,6 KBd - 115,2 KBd / fully assigned
to the PD/PC:10/100BaseTX RJ45-ethernet jack
TTY/20mA current loop (100 % mechanically and electr. compatible)
RS232: 9,6 KBd - 115,2 KBd / with a 1on1-cable to the PC
others:2xUSB, 2xPCMCIA (only for version -H)
33K6 HIGH-SPEED, V.42/BIS MNP5 analogue modem
ISDN (Euro ISDN + 1TR6)
|Operating temperature:||0 - 55°C|
|Case:||powder coated metal case with mounting flange and DIN-rail mounting|
Flat 300 x 175 x 70 mm
Hoch 67 x 280 x 170 mm
|Scope of delivery:|
Power connector 3pins big
Remote maintenance / telecontrol of PLC
Access to the connected PLC takes place by coupling via Analogue-, ISDN-, mixed Analogue-ISDN-, GSM-, UMTS-line and also via Internet with and without VPN-security.
Analogue and ISDN - how do they come together?
You have on the plant side only ISDN for telephone, but in your office there is only an analogue system? No problem, you have to install on the clients side the TP-II and activate there the analogue-emulation in the device. No, the modem signals will be send digitalized over ISDN and you can connect to it. So, you will be able to communicate though the telephone systems are different and your client isn´t forced to install an analogue connection.
Router - Mode (access to the network without router)
The Tele-Prof-II can also be used as a router for access from a PC via dial-up connection, so that a communication with the behind covered network results. Furthermore a network connection can be made with the TP-II <=> TP-II-line, but in doing so the IP-address-root must differ.
User dependant network access
You have PLC/LAN-participants different supplier in your network and everybody should have access to this network? No problem, you give every supplier a VPN-username and passwort, define in the destination device a user-dependent network-access and after positiv login he only can communicate to the released ip-addresses.
Separate your machine-net from the office-net
You need a separation between the machine-net and the office-net? No problem, plug a PCMCIA-LAN-card in your Tele-Prof-II-device (only for version -H) and the separation is OK. You have access to both nets via remote maintenance.
S7-CP-alternate (without LAN-CP to the PLC)
Do you have a PLC without CP343-1 or CP443-1 and a TP-II as remote maintenance device? Then activate the CP-mode of the TP-II and your visualisation goes directly ONLINE via the LAN of the TP-II.
PLC coupling (data exchange between PLCs)
Your pumping stations report the water levels of the central control via telephone network. The central office itself can of course transmit commands/messages to the substations as well. Thereto no dedicated line is required, a “normal” telephone connection is sufficient because the devices cut the line after occured message.
Failure report transmission without any change in the PLC programm
Your outstation reports the current value cyclically, or in case of malfunction the status via FAX, as SMS to your mobile phone, to your pager or also via e-mail. And this without an intervention of the PLC-program. Here the variables and actions are stored and processed in the TP-II.
Failure report transmission released by the PLC
Your outstation reports the current value cyclically, or in case of malfunction the status via FAX, as SMS to your mobile phone, to your pager or also via e-mail.
Remote maintenance of centralized PLC-devices
You have many PLC and you want to programm them central on one place? No problem, you have to connect them all to the KOR/MUX-Tele-Switch, connect it with the TP-II and after telephone connect you will be able with the PD-bus-selection of your Step5-software to go ONLINE. Of course the MOR/MUX-Tele-Switch is cascadable, so you can connect up to 30 PLCs to the devices.
Sending ASCII-data to a PC
Your car park or control sends the configuration / capacity utilisation to a PC with a modem, so that the data can be used for further processing.
Direct-mode "extended serial interface"
There is an unsupported control or data logger or converter integrated in your installation which protocol is not supported? No problem, the signs that the PC in the office sends will be transferred via telephone line by the Direct-mode, and on-site reproduced by the TP-II. The way back is identical. So in that case there’s also a communication to the electronic devices available.
Data logger with FTP-interface
You need a data logger which tape-records the specified data of the PLC and you can collect the data via FTP on demand. No problem, TP-II with the option Datalogger is the solution for you.
All prices plus costs of delivery, shipping insurance and VAT.
|9372-OEM||TELE-PROFessional II worldwide use|
OEM - Version (all accessories optional)
without PCMCIA-Slot for UMTS-/LAN-card
|9372-FLAT||TELE-PROFessional II worldwide use |
flat version / OEM - Version
(all accessories optional) without
PCMCIA-slot for UMTS-/LAN-card
|9372-FLAT-H||TELE-PROFessional II worldwide use |
flat version / OEM - Version (all accessories
optional) with PCMCIA-slot for UMTS-/LAN-Card
|9372-OEM-H||TELE-PROFessional II worldwide use|
OEM - Version (all accessories optional) with
PCMCIA-slot for UMTS-/LAN-Card
|9352.1||USB-cable plug/plug type A-A 3m|
USB 1.1 / 2.0 up to 480 MBit
|9359.1:1||1:1 cable 9pins D-SUB|
D-SUB 9pins (male) <=> D-Sub 9pins (female),
|9361-3||S5-connecting cable 3m|
|9361-3.05M||S5-connecting cable 5m|
for TELE-PROF, MINI-/PG-MUX-II
|9361-3.06M||S5-connecting cable 6m|
for TELE-PROF, MINI-/PG-MUX-II
|9361-3.10M||S5-connecting cable 10m|
for TELE-PROF, MINI-/PG-MUX-II
|9370-8-AT||Special phone-cable for Austria|
RJ12 plug <=> telephone plug of Austria
|9370-8-BE||Special phone-cable for Belgium|
RJ12 plug <=> telephone plug of Belgium
|9370-8-CH||Special phone-cable for Switzerland|
RJ12 plug <=> telephone plug of Switzerland
|9370-8-D/USA||Phone-cable analogue Germany+USA|
RJ12 plug <=> RJ12 plug
with TAE-adapter for Germany
|9370-8-DK||Special phone-cable for Denmark|
RJ12 plug <=> telephone plug of Denmark
|9370-8-FR||Special phone-cable for France|
RJ12 plug <=> telephone plug of France
|9370-8-GB||Special phone-cable for Great Britain|
RJ12 plug <=> telephone plug of Great Britain
RJ45 plug <=> RJ45 plug, assigned 1to1
|9370-8-IT||Special phone-cable for Italy||23,- €|
|9370-8-NL||Special phone-cable for Netherlands|
RJ12 plug <=> telephone plug of the Netherlands
|9370-SET||Phone-connector-set 16parts Obsolete|
|9370-TAE||TAE junction box|
analogue telephone box (NFN)
for on-wall mounting
for TP, TB + TP-II-FLAT
|9372||TELE-PROFessional II Starter-Kit|
|9372-24||Power connector 3pins big|
connector plug lockable by jack with screws
|9372-LANCARD||Network-card for TP-II Obsolete|
Ethernet networkcard Cardbus PCMCIA 10/100
|9372-UMTS-Ant||UMTS directional antenna|
external antenna for the UMTS-card
|9379.1||MPI-/Profibus connecting cable 1m|
connects MPI-modem/TP-II with the S7-PLC
|9391-MT||Mounting set |
|9391.1||24V DC power-supply unit 625mA|
Primary 110V - 240 VAC Euro+USA-plug
|9636-CROSS||Cross-cable 3m Cat5+, shielded|
RJ45 plug <=> RJ45 plug, twisted pinning
|9636-TCPIP||Patch-cable 3m, Cat5+, shielded|
RJ45 plug <=> RJ45 plug, 1:1