|
Innovation-Network Automation 2021/8
|
|
|
|
|
|
Your projects <=> our solutions, let's tackle it: hotline@process-informatik.de
|
|
|
|
|
|
Kleverle's practical tips:
|
|
|
-
Simatic-Manager and PC-adapter-driver under Windows 64-bit:
Siemens has the driver "PC-Adapter.xxx.1" for Simatic-Manager installations under 64-bit Windows limited. No serial COM port can be set, all serial adapters can no longer be used.
Remedy: USB- or LAN-products like "MPI-USB-/MPI-II-cable / S7-USB-module / S7-LAN-module" and "TIC-driver"
-
Communication-driver S7-TCPIP RFC1006 and no data from S7-1x00-PLC:
With these controls, the external PUT/GET-access must be explicitly enabled in the HW-configuration. In addition, when accessing to DBs, the optimized block-access must be deactivated for these DBs.
Then restart the PLC, otherwise no data in the controller can be accessed.
-
Read back project from configured panel without an existing source-project:
A configured panel can only be read back if the option "Read back allowed" was set. If this option is not set, a backup of the panel can be created and copied to panels of the same construction,
but no changes are possible. The source-project is then required for this. If the option is set, the panel can be read out directly with the configuration-tool.
|
|
|
|
|
|
USB-Serial-convertercable
Function also with Step5 from Siemens
|
|
|
|
|
- Including S5-Patch (Step5 supports virtual COM-ports)
- Supports S5- and S7-interface-parameters
- 9pol. COM-interface from USB 2.0-port
- Display communication as RxD-/TxD-LEDs
- Complete electronics integrated in the connector housing
- Cable length 3m
- Function also with/in VMWare
- Several converters can be used simultaneously on one PC
- Includes drivers for Win2000 / XP / Vista / Windows7 / Win 8 / Win 8.1 (32+64-Bit) / Win 10
|
|
|
|
|
more...
to the top...
|
|
|
|
|
|
USB-powercable for 24V DC
Mobile 24V DC from the USB-port or battery-pack
|
|
|
|
|
- Generates the required 24V DC from the USB-voltage 5V
- Stranded ends with wire-end-ferrules
- Maximum withdrawal current: 125mA (when connected to a PC, only a maximum of 100mA!)
- USB connector type A (universal), therefore also fits in USB battery-pack
- Cable length: 5m, special lengths on request
- Other voltages on request
|
|
|
|
|
more...
to the top...
|
|
|
|
|
|
PLC-programming starter-packages
PLC-programming including interface-product - go ONLINE without problems/worries
|
|
|
|
|
- Software and interface-product in one package:
- S5-PLC via USB-connection:
- Starter-package with PG-USB-cable 3m
- Starter-package with PG-USB-cable 5m
- S5-PLC over LAN-connection:
- Starter-package with S5-LAN++-module
- Win XP up to Win10 (32/64Bit)
- Simple and convenient programming
- Online-syntax-check as soon as the instruction is entered
- Modular tool, license can be expanded at any time
- Step7 (S7-300/400) included as FREEWARE without support
|
|
|
|
|
more...
to the top...
|
|
|
|
|
|
iBx - intelligent bus-terminal
Replacement for BT-777 - Also supports PG-BUS path-selection
|
|
|
|
|
- Replacement for no longer available BT-777-terminal
- No bus terminating resistors necessary
- Networking of S5-PLC without changing the configuration as PG-BUS
- LEDs to control the data-flow on the RS422-bus and from/to the S5-PLC
- All connection and operating elements on the front
- Fiber-optic-adapter for bus extension optional
- Bus-address can also be set via DIP (no change to the S5-PLC necessary)
- Rear-wall-mounting in the control-cabinet
|
|
|
|
|
more...
to the top...
|
|
|
|
|
|
S5/S7-TimeServer
GPS-time in S5/S7-PLC / NTP-time-server for connected network
|
|
|
|
|
- No SIM-cards required for operation
- Time directly into the PLC or in the DB of the PLC (PLC dependent)
- NTP-time-server for connected network
- Universally applicable:
- S5-PLC over S5-LAN++
- S7-300/400 over S7-LAN or CP343-1/443-1
- S7-1200/1500 over ProfiNet
- GPS-receiver (cable length 3m) included in delivery
- Quick and easy installation
|
|
|
|
|
more...
to the top...
|
|
|
|
|
|
|
|
|
|
|